Understanding your TRENDY PRO Functions - continued
Anti-Lost
Your Tracker will alert you if you move more than 5 metres away from your phone/tablet. To enable this function, start
the App, press Device => Anti-lost Alert, slide right.
Find Phone
Use your Tracker to trigger an audio alert on your phone/tablet until it is located. To initiate this function, start the App,
press Device => Find Phone, slide right.
Tracker Data Storage Activity
Data displayed on the Tracker is reset every day at midnight. Up to seven days of data can be stored on the Tracker
without the need to sync with the App. To sync your data, open the App and swipe down anywhere on the main page.
Sync progress will be indicated at the top of the page.
Frequently Asked Questions related to TRENDY PRO Functions
Why isn’t my step counter working correctly?
Please make sure you have installed the TrendyFit/VeryFitPro/VeryFit 2.0 App and followed the instructions as per the
Quick Start section in your Manual (charge, install the app, pair the device). Your Tracker will not function correctly if
you skip this.
When you first set up your Tracker, it will go through an initial calibration phase, which can take up to a day to
complete. During this time, you may find that steps may either not register correctly or appear to jump around. This is
completely normal! After the first day of use, step counting will register and record as expected. Thank you for your
patience with this! Please note that after the initial calibration period, the display will not always update in real-time
(step-by-step) as you are walking. It may also update in batches of steps as well.
Why isn’t my sleep tracked correctly?
The Tracker is detecting activities based on the
movement. When you have not moved in over an hour,
and this is confirmed by sleep behavior (period of
inactivity, rolling over, etc.), the algorithms assume that
sleep has begun.
If you move around, are restless in the early stages of
your sleep, or taking a short nap, the Tracker may not
catch it as sleep time.
Why does my Tracker display distance in Km and not in Miles?
You can switch Unit of Measure from Imperial (Miles) to Metric (Kilometers) in your Application:
•Start the Application, go to System Settings
•Select Unit Set and pick “Imperial” or “Metric”
Why isn’t my activity data showing in the App?
To sync the activity data stored on your TRENDY Pro Tracker with the App on your phone/tablet, open the
TrendyFit/VeryFitPro/VeryFit 2.0 App and swipe down anywhere on the main page (the first page you see when you
open the App).
Why can’t I see all functions on my Tracker?
Some functions require turning on within the TrendyFit/VeryFitPro/VeryFit 2.0 App before they will appear on your
Tracker. To enable them, start the application=>Device on the bottom Menu, slide the selector for the desired function
right to enable the function on your TRENDY PRO.
How do I complete factory reset of my TRENDY PRO Fitness Tracker?
Make sure your Tracker is connected to the App. Open the App and go to User > System Settings > Restart Device and
tap Confirm Reboot. This will backup the data on your Tracker and reset it as per factory settings. Once this operation is
complete, your data will be copied back to your Tracker.
