TRENDnet TV-PC350 Manual de usuario
TV-PC350
USB Digital Video Camera
User’s Guide
Model TV-PC350
Table of Contents
Overview………………………………………………… 1
System requirement…………………………………….. 1
Camera Diagram……………………………………….. 1
Hardware installation………………………………….. 2
Driver installation………………………………………. 2
Quality & Format Adjustment………………………….. 10
Specifications……………………………………………. 11
Appendix: Microphone Installation
Video Conference Glossary
Overview
Thank you for purchasing the USB Digital Video Camera. This high
performance PC camera imbedded with video compression engine
inside and push the video transmission through USB interface to the
limit. A choice of high resolution sensor provides sharpest image
quality, you will never too late to enjoy the pleasure of video
applications in your PC with this USB Digital Video Camera.
Following is the installation guide for running USB Digital Video
Camera in Windows environment for the first time.
System requirement
Pentium 133 or above CPU, Pentium II 350 recommended
32 MB of system RAM
One USB port
Microsoft Windows 98 or above
20MB hard disk space
Camera Diagram
Optical Lens
Power LED
SnapshotSwitch
ManualFocus
Hardware installation
To plug in the USB cable of PC camera into the USB port in the PC
or any USB hub attached to the PC.
Note:
The Add New Hardware Wizard will start automatically once the
camera has been plugged in.
The LED indicator of the camera will be active after the USB host
controller having initiated the USB device properly.
Driver installation
Win98
Once the camera has been installed, the Windows will detect the
camera and prompt “Add New Hardware Wizard” dialog box on the
screen.
Click on “Next>” button to continue.
Select the “Search for the best driver for your device.”
And click on the Next button to search for the best driver.
Select the “Floppy disk driver” and insert the driver diskette that
came with the camera into the floppy drive. Then click on the Next
button.
Click on the Next button, then the Windows will copy all required
files from the driver diskette to system.
A:\CCDV218.INF
CCD Camera Capture
Click on the Finish button to complete the driver installation.
CCD Camera Capture
Win2000
1. Boot up the computer to Win2000 and then attach the camera to computer’s USB port.
2. At“FoundNewHardwareWizard” click on “Next”.
3. Select “Search for a suitable driver for my device” and then click “Next”.
4. Select “Floppy disk drives” and then click on “Next”.
5. Click “Next”.
a:\ccdv218.inf
6. Click “Yes”.
7. Click “Finish”.
Quality & Format Adjustment
The driver provides “Source” and “Format” option to adjust quality
and format for display.
When you pop up the application software, to select “Option->
Video Source” allows you to fine tune image related parameters,
such as Contrast, Sharpness and Gamma.
Auto White Balance is not recommended to change, unless the
video color unstably shift.
To select “Option -> Video Format”allows you to set the
incoming color depth as 24-bit RGB and choose image resolutions.
Note: The higher the RGB bits, the larger the video file size well be. The
lower resolution is recommended for video-conferencing or recording video.
after this step the Configuration Advisor will check to ensure that the
installation went smoothly.
Otros manuales para TV-PC350
1
Tabla de contenidos
Otros manuales de Cámara web de TRENDnet
TRENDnet
TRENDnet TV-IP672WI Manual de usuario
TRENDnet
TRENDnet TV-IP100 - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TV-PC100 Manual de usuario
TRENDnet
TRENDnet TV-IP100 - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TV-IP100 - DATA SHEETS Manual de usuario
TRENDnet
TRENDnet TV-IP672WI Manual de usuario
TRENDnet
TRENDnet TV-IP201W Manual de usuario
TRENDnet
TRENDnet TV-PC301 Manual de usuario
TRENDnet
TRENDnet TV-IP762IC Manual de usuario
TRENDnet
TRENDnet TV-PC100 Manual de usuario
