TRAXTON 64PXL Manual de usuario
Please check for the latest updates and changes on the TRAXON website.
© 2010 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
WWW.TRAXONTECHNOLOGIES.COM
USER MANUAL
64PXL MIRROR WASH RGB
(PA.MI.7110002)
6/10 V1.1
2 colors
PANTONE BLACK M
PANTONE 400 M
CONTENTS
1. INTRODUCTION 1
2. PACKING CONTENTS 1
3. SAFETY AND PRECAUTIONS 2
4. INSTALLATION AND SYSTEM CONFIGURATION 3
4-1 MOUNTING – DIN RAIL 3
4-2 MOUNTING – DIRECT TO WALL 4
4-3 CONNECTION 4
4-4 CONTROL 6
4-5 POWER CONNECTIONS 6
5. TROUBLESHOOTING 7
6. CARE AND MAINTENANCE 7
7. TECHNICAL SPECIFICATIONS 8
8. WARRANTY STATEMENT 8
1 colors
PANTONE BLACK M
FOR YOUR OWN SAFETY AND THAT OF THE PRODUCT, PLEASE READ THIS USER
GUIDE CAREFULLY BEFORE BEGINNING SET-UP AND INSTALLATION.
CAUTION: DO NOT OPEN OR HANDLE THE PANELS EXCEPT AT A STATIC FREE
WORKSTATION OR WEARING AN ANTISTATIC WRIST STRAP.
The 64PXL Mirror Wash RGB is part of the Traxon™Panels product line, enabling a flexible
setup of medium to large scale RGB LED color changing walls. The 64PXL Mirror Wash RGB
features 64 individually addressable pixels for full programming liberty.
• 64 individually controllable
RGB SMDs
• Seamless color transition
between the pixels
• DMX / e:pix Control
• TX Connect Smart Cabling
2. PACKING CONTENTS
1 2
1. INTRODUCTION
64PXL MIRROR WASH RGB (PA.MI.7110002)
1 x 64PXL Mirror Wash RGB
1 colors
PANTONE BLACK M
4 x Mounting Screws1 x TX Connect Smart Interconnection Cable (80cm/31.5”)
This product is designed for indoor use only.
An ambient operating air temperature range of 0°C~40°C (32°F ~ 104°F) must be
adhered to at all times.
DO NOT disassemble. The product has no user serviceable parts.
DO NOT use the product if the cover shield is broken.
If the product has been transported or stored in low temperatures, DO NOT connect it to the
power supply until it has reached room temperature, to prevent any internal condensation
from damaging the product’s electronics.
DO NOT expose the product to moisture, extreme heat or direct sunlight. Use in a clean and
dust free environment.
Avoid looking directly into the LED light at a close distance.
3. SAFETY PRECAUTIONS
DANGER – ENSURE THAT MAIN POWER SUPPLY IS UNPLUGGED BEFORE
INSTALLING OR WIRING THE PRODUCT.
Failure to adhere to the following instructions could result in death, serious injury, or property
damage, and will void the product warranty.
CAUTION – POWER/DATA SUPPLY MUST BE INSTALLED BY A QUALIFIED
ELECTRICIAN OR TECHNICIAN IN ACCORDANCE WITH RELEVANT LOCAL
STANDARDS AND REGULATIONS.
DO NOT ATTEMPT TO INSTALL OR USE THE PRODUCT UNTIL YOU HAVE READ
THIS MANUAL THOROUGHLY AND UNDERSTAND THE INSTALLATION
INSTRUCTIONS.
DO NOT USE THE PRODUCT IF ANY CABLES ARE DAMAGED.
340mm/13.4”
95mm/3.7”500mm/19.7” 340mm/13.4”
SIDEFRONT BACK
500mm/19.7”
3 4
4. INSTALLATION AND SYSTEM CONFIGURATION
4-1 MOUNTING — DIN RAIL
• Use a pencil or chalk to mark the horizontal alignment before installation.
• Mount the DIN rails to the wall, leaving minimum clearance (Fig 1).
• Hang the panel onto the DIN rail as shown in Fig 2.
1 colors
PANTONE BLACK M
Fig 2: Mounting onto DIN Rail
Fig 1: Mounting Clearance
CAUTION – DO NOT INSTALL THE PANEL IF THE COVER SHIELD IS DAMAGED.
4-3 CONNECTION
The 64PXL panel can be controlled by the Traxon Micro Server or standard DMX512 controllers.
Each Micro Server can control up to four 64PXL panels (two panels per DMX512 output).
Connect the Micro Server to the 64PXL panels as shown in Fig 4.
4-2 MOUNTING — DIRECT TO WALL
• Use a pencil or chalk to mark the horizontal alignment before installation.
• Install four screws to the wall, leaving minimum clearance (Fig 1).
• Reverse the 4 mounting plates on the Panel.
• Hang the panel on the wall as shown in Fig 3.
Fig 3: Direct Screw Mounting to Wall
DO NOT MOUNT ON
UNEVEN SURFACE
1. Unscrew and detach
the 4 mounting brackets.
2. Reverse and screw back on
the 4 mounting brackets.
3. Screw and hang panel.
340mm/13.4”
340mm/13.4”
Min. 6mm/0.24”
Allow sufficient ceiling
clearance when mounting.
Min. 10mm
340mm/13.4”
35mm x 7.5mm DIN rail
(EN50022, BS5584, DIN 46277-3)
(Not included)
5 6
1 colors
PANTONE BLACK M
Each LED Engine Smart 100W Indoor can power up to 2 panels. Make sure the panels are
properly positioned and securely installed before connecting the power.
Please refer to Fig 4 for power connection to the system.
4-5 POWER CONNECTIONS
4-4 CONTROL
The LEDs on the 64PXL panel are controlled by DMX. Each panel uses 192 DMX channels −
3 channels for each pixel. The pixel location and its DMX channels are shown below.
Pixel Number
Key:
Panel pixel number 1
DMX Channels
1
(1-3)
32
(94-96)
31
(91-93)
30
(88-90)
29
(85-87)
28
(82-84)
27
(79-81)
26
(76-78)
25
(73-75)
24
(70-72)
23
(67-69)
22
(64-66)
21
(61-63)
20
(58-60)
19
(55-57)
18
(52-54)
17
(49-51)
49
(145-147)
50
(148-150)
51
(151-153)
52
(154-156)
53
(157-159)
54
(160-162)
55
(163-165)
56
(166-168)
57
(169-171)
58
(172-174)
59
(175-177)
60
(178-180)
56
(181-183)
55
(184-186)
54
(187-189)
53
(190-192)
16
(46-48)
15
(43-45)
14
(40-42)
13
(37-39)
12
(34-36)
11
(31-33)
10
(28-30)
9
(25-27)
8
(22-24)
7
(19-21)
6
(16-18)
5
(13-15)
4
(10-12)
3
(7-9)
2
(4-6)
1
(1-3)
48
(142-144)
47
(139-141)
46
(136-138)
45
(133-135)
44
(130-132)
43
(127-129)
42
(124-126)
41
(121-123)
40
(118-120)
39
(115-117)
38
(112-114)
37
(109-111)
36
(106-108)
35
(103-105)
34
(100-102)
33
(97-99)
Fig 4: 64PXL Panel System Connection Example
CAUTION: PLEASE ENSURE THAT THE POWER IS SWITCHED OFF WHEN THE
DATA CABLES ARE BEING CONNECTED. FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE PRODUCTS AND VOID THE PRODUCT WARRANTY.
A to B: 100 meters
CONTROLLER to first FIXTURE.
C to D: 30 meters
POWER SUPPLY to last FIXTURE in chain.
CABLING LENGTHS
Back View
Back View
Back View
Back View
Micro Server
(CS.MA.5000000)
CONTROLLER
TX Connect Data Cable
(DI.IC.xxxxxxx)
POWER SUPPLY
LED Engine Smart
100W Indoor
(PS.IA.0010000)
TX Connect Smart
Power/Data Injector Box
(TI.ZI.0000100)
TX Connect Smart
Interconnection Cable
(TI.IC.xxxxxxx)
TX Connect Smart Interconnection Cable (TI.IC.xxxxxxx)
AC Power Cord
(PS.AC.xxxxxxx)
A
C
D
B
7 8
1 colors
PANTONE BLACK M
Color Resolution : 3 x 14-bit (RGB)
Color Range: 16.7 million additive RGB colors with variable intensity
Light Source: Ultra Bright SMD LED
Beam Angle: 120°
Power Input: 24VDC
Current Consumption: 1.5A max.
Power Consumption: 36W max.
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: –20°C to +70°C (–4°F to +158°F)
For use with TRAXON LED Engine Smart 100W Indoor (PS.IA.0010000) power unit.
Traxon warrants its Products against material or workmanship defects for a period of one (2)
year from the date of purchase provided that the purchased items are under conditions stated in
respective instruction manuals. Proof of purchase is necessary upon on warranty claim.
Any implied warranty of merchantability, or fitness for a particular purpose or use, shall be limited
to the duration of the foregoing written warranty. Otherwise, the foregoing warranty is the
purchaser’s sole and exclusive remedy and is in lieu of all other warranties, express or implied.
Traxon shall not be liable for any incidental or consequential damages or a loss of anticipated 16
All warranty information, product features and specifications are subject to change without
notice.
7. TECHNICAL SPECIFICATIONS
8. WARRANTY STATEMENT
Problem
Panels cannot be installed
close together
Images do not show on the
connected panels
No power supply
Solution
Ensure the installation surface is flat and smooth.
• Data cable length exceeds 100m/330ft.
• Check the connections of the controller and panels.
• Check that the power supply is connected and the power is ON.
• Check the controller configuration.
• DC power cable length exceeds 30m/99ft
5. TROUBLESHOOTING
6. CARE AND MAINTENANCE
Traxon™ products are of superior design and quality and should be treated with
care. The recommendations below will help fulfill and warranty obligations and
gain good use and longevity from the products.
- Do not attempt or use the product(s) until you read and understand the installation instructions. Failure to adhere to
these instructions could result in serious injury or property damage.
- Do not use product(s) if cables are damaged.
- Do not use product(s) when wet or in wet area. Moisture can cause electric shock and damage to product(s).
- Do not use product(s) in dirty and dusty environment.
- Do not use product(s) in extreme heat environment. Ensure there is sufficient airflow and use cool air circulation if
required.
- Do not drop, knock, or shake product(s). Rough handling can damage the electronics and void the warranty.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean products. Wipe with a damp cloth on
housings and a dry cloth on electronics to remove dirt or dust.
- Do not use product(s) outdoors.
- Do not attempt to service or repair the product(s) unless done by an authorized service personnel. Contact your the
local Traxon™ office or distributor for details.
If the product is not working correctly, please contact your nearest authorized service
centre or Traxon Technologies office for assistance.
Tabla de contenidos
