Traxon Technologies E:cue LIGHTDRIVE+ WiFi Manual de usuario

AM477420038

e:cue LIGHTDRIVE+ WiFi

Conguration Guide

Edition:

06.02.23 [EN_LIGHTDRIVEplusWiFi_Setup_v2p1]

Published by:

Traxon Technologies Europe GmbH

Karl-Schurz-Strasse 38

33100 Paderborn, Germany

Read the Conguration Guide and the Safety Instructions

carefully. Subject to modication without prior notice.

Typographical and other errors do not justify any claim for

damages. Modication of the product is prohibited.

This document is designed for system administrators and

accomplished users of the product.

All product names and trademarks mentioned in this manual are

trademarks of their respective owners.

Except for internal use, relinquishment of the instructions to a

third party, duplication in any type or form - also extracts - as

well as exploitation and / or communication of the contents is not

permitted.

Traxon Technologies Europe GmbH

Sales Operations

Karl-Schurz-Str. 38

33100 Paderborn, Germany

+49 5251 54648-0

[email protected]

Downloads and more information at:

www.ecue.com

LIGHTDRIVE+ WiFi — Conguration Guide | Table of Contents

Table of Contents

1 Safety instructions 03

1.1 Symbols 03

1.2 General instructions 03

2 General remarks 03

2.1 Transport 03

2.2 Unpacking 03

2.3 Warranty regulations 03

2.4 Maintenance and Repair 03

2.5 Disposal 04

2.6 Support 04

2.7 Further information 04

3 General device description 04

3.1 Delivery content 05

3.2 Optional accessories 05

3.3 Product specications 05

4 Connectors and interfaces 07

4.1 User & USB interfaces 07

4.2 Connections 08

4.3 Installation 08

5 DIP switches 08

5.1 Control all Zones via Zone A 09

6 Standard use 09

6.1 Jog wheel 09

6.2 Zones 09

6.3 Scenes 10

6.4 Turning o/on Zones 10

6.5 Adjusting running Scene content 10

6.6 Saving Scenes 10

6.7 Locking / Unlocking the LIGHTDRIVE+ WiFi 11

6.8 Synchronizing devices 11

7 Conguration via App 11

7.1 Onboarding 12

7.2 Sequence of conguration 12

7.3 LIGHTDRIVE+ app: Operation and functions 13

8 Firmware Update 23

9 Restart and Reset 24

9.1 Default values 25

10 Certications 26

11 Dimensions 26

12 All links 27

13 Trouble shooting 27

14 FAQ 27

14.1 Power supply 28

14.2 Network 28

14.3 Update 28

1 Safety instructions

Read the safety instructions, provided in a separate manual, carefully. Make sure that the environmental,

mounting, and installation prerequisites are met. This manual should be kept at a safe place and in reach of

the device.

1.1 Symbols

The exclamation mark warns about possible

damage of the device itself, to connected devices,

and to the user.

The information symbol gives general hints and

informs about handling and procedures for use of

the device.

1.2 General instructions

2 General remarks

2.1 Transport

Only transport the device in its original packaging. This protects the device from damage.

2.2 Unpacking

Only unpack the e:cue LIGHTDRIVE+ WiFi at its installation location. To protect the device against

condensation water, unpack it and wait until all moisture remaining in the device has evaporated.

Condensation can occur when the device is moved from a cold to a warm location. Keep the packaging for

use in case of further transport. Inspect all parts for completeness regarding chapter „3.1 Delivery content“

on page 05. If there is apparent damage to the device or parts are missing from the delivery scope, please

contact the Traxon e:cue Support service.

2.3 Warranty regulations

Depending on the product, warranty regulations are of dierent duration. The warranty time is usually noted

in the quote and in the order conrmation. See www.traxon-ecue.com/terms-and-conditions for details. Legal

warranty regulations apply in any case.

2.4 Maintenance and Repair

This device requires no maintenance.

— The Ethernet port of the LIGHTDRIVE+ WiFi is not

designed for inter-building connections. Use the

LIGHTDRIVE+ WiFi only with intra-building networks.

— If safety instructions are missing, please contact Traxon

e:cue to receive a new copy.

— Before dismounting, appropriate measures must be taken

to protect the respective components against damage

caused by electrostatic discharge (ESD protection).

— Do not try to repair the device. Return it to your Traxon

e:cue distributor for replacement or repair.

LIGHTDRIVE+ WiFi — Conguration Guide | Safety instructions



content

2.5 Disposal

The proper disposal of packing materials and of the device is the responsibility of the respective user and for

his account; in all other matters, the retrieval obligation for packing materials and the device is subject to the

statutory regulations.

2.6 Support

In case of technical problems or questions regarding installation and repair please contact:

Traxon Technologies Europe GmbH

Customer Service

Karl-Schurz-Str. 38

33100 Paderborn, Germany

+49 (5251) 54648-0

[email protected]

2.7 Further information

For further product information, such as the Onboarding Guide, check www.ecue.com.

3 General device description

The LIGHTDRIVE+ WiFi fuses dynamic lighting control with a sophisticated design. The wall-mounted user

terminal is able to output various scenes and eects in dierent zones which are set-up via the

LIGHTDRIVE+ app. No matter what kind of location you have in mind: bars and restaurants, shops and malls,

museums, reception areas ... For any purpose of any scale, be it small or mid-size, LIGHTDRIVE+ WiFi is the

easy and straightforward solution for lighting control. The user terminal serves as a standalone DMX512

controller. The focal point of user interaction is the so called Jog Wheel. With this control knob, scenes,

zones and eects, such as speed and brightness, can be adjusted in a blink of an eye. The user terminal itself

shows a clear and minimalistic design with a high quality glass front panel. The LIGHTDRIVE+ WiFi is

compatible with all monochrome, dynamic white, RGB and RGBW LED xtures.

Main features:

yState-of-the-art user interface with elegant appearance

ySet-up via LIGHTDRIVE+ app

yFor monochrome, dynamic white, RGB and RGBW LED xtures

yTwo DMX outputs, divided in 3 zones

y8 scenes in each of the 3 predened zones

yPre-dened FX eects

yIntegrated scheduler for time trigger

yIntegrated proximity sensor

y2 low-side switches and 2 dry inputs for integration into 3rd party systems.

Batteries and technical appliances must not be disposed of

with domestic waste, but should be handed in at the

appropriate collection and disposal points.

LIGHTDRIVE+ WiFi — Conguration Guide | General device description



content

3.1 Delivery content

Delivery content for the e:cue LIGHTDRIVE+ WiFi (AM477420038):

1. e:cue LIGHTDRIVE+ WiFi

2. Device plugs

3. Safety instructions

4. Welcome card

3.2 Optional accessories

yPower Supply 15W 12V DIN rail (AM3137600HA)

3.3 Product specications

Product speci cations

Dimensions

(W x H x D)

80 x 160 x 30 mm /

3.15 x 6.30 x 1.18 inch

Weight 188 g / 0.41 lb

Power supply PoE IEEE 802.3af, polarity-

independent

or 12 V DC SELV

Power consumption typ. 4.5 W,

max. 6 W (all LEDs 100 % white),

on device plug

Operating temperature 0 ... 35 °C / 32 ... 95 °F

Storage temperature 0 ... 50 °C / 32 ... 122 °F

Op. / storage humidity 0 … 80% RH, non-condensing

Protection class IP20

Installation Indoor installation only,

Intra building connections only

Electrical safety class SELV

Housing PC/ABS, glass

Mounting Wall mount housing, suitable for most

international in-wall mounted boxes

Certi cates CE, ETL, FCC, UKCA

Real time clock with capacitor backup, holds time for

~1 h

Interface speci cations

User interfaces (UI) 12 x capacitive touch key

1 x jog wheel with switch

System interfaces 3 x DIP switch

1 x Ethernet 10/100 Mbit/s, on device

plug, max. cable length: 65 m,

for synchronization of multiple devices

only

1 x USB 2.0 micro USB-B,

for update only

DMX outputs 2 x DMX512, on device plug

Fixture types Monochrome (1 channel)

Dynamic White (2 channels)

RGB (3 channels)

RGBW (4 channels)

Low-side switches 2 x 24 V DC, max. 3 A, ON resistance 50

mΩ, normally open, galvanically isolated,

overload protected, on device plug

Digital dry contacts 2 x inputs, 5 V DC contact supply, on

device plug,

Input high threshold voltage:

VIHmin = 2.5 V

Input low threshold voltage:

VILmax = 1.2 V

Typ. input threshold voltage:

VSW(typ) = 1.5 V

Input voltage max.: VINmax = 15 V

Digital inputs supply For dry contacts

Use 5 V DC from device (pin 7)

VSUP = 5 V DC

max. 15 mA

Typ. current when sourcing all 2 ports:

Ityp = 12 mA

Device plugs Push-in spring connection plug,

Stripping length: 6 mm

Major diameter of isolated cable max.

2 mm

Cable cross-section:

solid: 0.14 ... 0.5 mm²

 exible: 0.2 ... 0.5 mm²

WiFi RF frequencies: 2.4 ... 2.473 GHz,

IEEE 802.11 b/g/n

Sensors Proximity sensors for UI activation

LIGHTDRIVE+ WiFi — Conguration Guide | General device description



content

Product speci cations

Dimensions

(W x H x D)

80 x 160 x 30 mm /

3.15 x 6.30 x 1.18 inch

Weight 188 g / 0.41 lb

Power supply PoE IEEE 802.3af, polarity-

independent

or 12 V DC SELV

Power consumption typ. 4.5 W,

max. 6 W (all LEDs 100 % white),

on device plug

Operating temperature 0 ... 35 °C / 32 ... 95 °F

Storage temperature 0 ... 50 °C / 32 ... 122 °F

Op. / storage humidity 0 … 80% RH, non-condensing

Protection class IP20

Installation Indoor installation only,

Intra building connections only

Electrical safety class SELV

Housing PC/ABS, glass

Mounting Wall mount housing, suitable for most

international in-wall mounted boxes

Certi cates CE, ETL, FCC, UKCA

Real time clock with capacitor backup, holds time for

~1 h

Interface speci cations

User interfaces (UI) 12 x capacitive touch key

1 x jog wheel with switch

System interfaces 3 x DIP switch

1 x Ethernet 10/100 Mbit/s, on device

plug, max. cable length: 65 m,

for synchronization of multiple devices

only

1 x USB 2.0 micro USB-B,

for update only

DMX outputs 2 x DMX512, on device plug

Fixture types Monochrome (1 channel)

Dynamic White (2 channels)

RGB (3 channels)

RGBW (4 channels)

Low-side switches 2 x 24 V DC, max. 3 A, ON resistance 50

mΩ, normally open, galvanically isolated,

overload protected, on device plug

Digital dry contacts 2 x inputs, 5 V DC contact supply, on

device plug,

Input high threshold voltage:

VIHmin = 2.5 V

Input low threshold voltage:

VILmax = 1.2 V

Typ. input threshold voltage:

VSW(typ) = 1.5 V

Input voltage max.: VINmax = 15 V

Digital inputs supply For dry contacts

Use 5 V DC from device (pin 7)

VSUP = 5 V DC

max. 15 mA

Typ. current when sourcing all 2 ports:

Ityp = 12 mA

Device plugs Push-in spring connection plug,

Stripping length: 6 mm

Major diameter of isolated cable max.

2 mm

Cable cross-section:

solid: 0.14 ... 0.5 mm²

 exible: 0.2 ... 0.5 mm²

WiFi RF frequencies: 2.4 ... 2.473 GHz,

IEEE 802.11 b/g/n

Sensors Proximity sensors for UI activation

LIGHTDRIVE+ WiFi — Conguration Guide | General device description



content

4 Connectors and interfaces

4.1 User & USB interfaces

Front view:

Jog wheel halo:

ydisplays the color and brightness of the running Scene.

ydisplays the current brightness or color adjustment (see „6.5 Adjusting running Scene content“ on

page 10).

Scene light stripes:

— display color and brightness of the Scenes’ content.

Zone light stripes:

— display color and brightness of each running Scene.

Dismounting slot

LIGHTDRIVE+ WiFi controller

Base plate

8 Scene buttons + light stripes

3 Zone buttons + light stripes

Tone button + light stripe

USB interface

Jog wheel with

button + halo

LIGHTDRIVE+ WiFi — Conguration Guide | Connectors and interfaces



content

— displays the current color adjustment (see „6.5 Adjusting running Scene content“ on page 10).

Tone stripe:

— displays on restart the WLAN connection status until any button is pressed:

Green: connected to another WLAN.

Red: open access point, no connection to another WLAN.

— displays the current color or speed adjustment (see „6.5 Adjusting running Scene content“ on page

10).

4.2 Connections

Rear view:

APower supply

BDMX outputs

CPoE & Ethernet

DLow-side switches & Digital dry contacts

EDIP switches (see “5 DIP switches” (page 08))

4.3 Installation

For installing and mounting the LIGHTDRIVE+ WiFi see its Installation Guide. Scan the QR

code, open the Link to PDF or download at www.ecue.com.

5 DIP switches

The DIP switches dene the conguration. The DIP switches are only read when the LIGHTDRIVE+ WiFi is

powered up. After changing the switch settings, the LIGHTDRIVE+ WiFi must be restarted: Press 10 x Tone

button and then 1 x Scene 1 button. Alternatively power down and up again the device.

(0 = OFF position, 1 = ON position)

EDIP switches

1 ... 7 no function

1 2

123456

LIGHTDRIVE+ WiFi — Conguration Guide | DIP switches



content

EDIP switches

8Enable/ Disable Tone button (see „6.5 Adjusting running Scene content“

on page 10)

0 = Tone button disabled

1 = Tone button enabled

9Control all Zones via Zone A (see „5.1 Control all Zones via Zone A“ on

page 09)

0 = disabled

1 = enabled

10 Overwrite Scenes (see „6.6 Saving Scenes“ on page 11)

0 = Scenes can not be overwritten using the user interface

1 = Scenes can be overwritten using the user interface (“Saving scenes”)

5.1 Control all Zones via Zone A

Is DIP switch 9 enabled, you can control the Scene selection (including brightness levels) of all Zones at once

via Zone A with the following characteristics:

— Is Zone A selected, Scene control in this Zone is also valid for B and C. Example: Select for Zone A the

Scene 2  Zone B and Zone C will also each play their Scenes 2. Low-side switch settings are only used

as dened for Zone A, low-side switch settings for Zones B and C are ignored.

— Are Zone B or C selected, all control works as dened, including low-side switch settings. You have

separate control for the current Zone.

6 Standard use

The LIGHTDRIVE+ WiFi controls up to two DMX universes. This address range is split into three Zones. To

any Zone a Scene can be assigned, a Scene can be a constant color or an eect and a brightness level. To

select Zones and assign Scenes, touch-sensitive button are used. To change the brightness turn the jog

wheel. To switch the LIGHTDRIVE+ WiFi on and o, press the jog wheel. The color in the current selected

Zone is also used to illuminate the jog wheel while it is not in Idle or O mode.

When the LIGHTDRIVE+ WiFi is not used, its light stripes are dimmed down after 30 seconds (default value

of Idle mode; time can be changed via LIGHTDRIVE+ app). It returns to the active state when the jog wheel is

turned or any button is touched. The integrated proximity sensor also reactivates the device back of Idle

mode, when the user approaches the LIGHTDRIVE+ WiFi. Reactivation does not change the selected Zone

or Scene. After switching o the device and switching it on again, the LIGHTDRIVE+ WiFi restores the same

state as selected before.

6.1 Jog wheel

Use the jog wheel to switch the LIGHTDRIVE+ WiFi on and o. Switching is done by

pressing the jog wheel. In standard mode, the jog wheel controls the brightness ( higher,

lower). The jog wheel also shows the current color of the xtures.

If the LIGHTDRIVE+ WiFi is in OFF Mode, you can change the appearance of the jog wheel

illumination (pulsative or static) by turning the jog wheel or via LIGHTDRIVE+ app settings.

6.2 Zones

Any Scene content related use requires that content has

been congured via the LIGHTDRIVE+ app.

LIGHTDRIVE+ WiFi — Conguration Guide | Standard use



content

Select a Zone with of the three Zone buttons. The Zone number at the right lights up and, when enabled, a

signal sound indicates the Zone selection. The LIGHTDRIVE+ WiFi controls three Zones:

— Zone A: DMX 1, addresses 1 ... 512

— Zone B: DMX 2, addresses 1 ... 256 (default)

— Zone C: DMX 2, addresses 257 (default) ... 512

Example:

Zone A

Zone B Zone C

The LIGHTDRIVE+ app can change the DMX address ranges of Zone B/C (see „Start Address Zone C:“ on

page 17).

6.3 Scenes

Select a Scene for the current Zone by touching one of the eight Scene buttons. The Scene number on the

right lights up and, when enabled, a signal sound indicates the selection of a Scene.

6.4 Turning o/on Zones

Turn o a Zone by pressing the Zone button for 5 seconds (long press). To turn on again the Zone, press any

Scene button with the Zone selected.

6.5 Adjusting running Scene content

Adjust brightness:

Turn the jog wheel to change the brightness of the running scene. To save the adjustment save the Scene

(see “6.6 Saving Scenes” (page 11)). To exit without saving changes, press any other Scene or the same

Scene.

Adjust color:

Touch the Tone button (short press) to be able to change the current Scene color. The Tone LED blinks and,

when enabled, a short signal sound is played. Select a color with the jog wheel. The jog wheel, the current

Zone LED and the Tone stripe reect the selected color. To save the adjustment save the Scene (see “6.6

Saving Scenes” (page 11)). Short press the Tone button again to switch to brightness adjustment. To exit

the Color mode without saving changes, touch the Tone button again.

Adjust speed:

Press the Tone button for ve seconds (long press) to be able to change the speed of the current Scene’s

eect. The Tone LED and Tone light stripe are blinking and when enabled, a short signal sound is played.

Select the speed of the current eect with the jog wheel. The Tone stripe blinks with the selected speed of

the eect. If the speed is zero, the Tone stripe is constantly alight. To save the adjustment save the Scene

Use of the Tone button requires that the DIP switch 8 on the

back is set to the “ON” position.

LIGHTDRIVE+ WiFi — Conguration Guide | Standard use



content

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Traxon Technologies

Traxon Technologies

Traxon Technologies e:cue SYMPL Core Sp Hoja de especificaciones

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario

Traxon Technologies e:cue LIGHTDRIVE+ WiFi Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas