3
Safety Notice
Do not operate the product in an explosive atmosphere.
Do not operate the equipment in the presence of flammable gases or fumes.
Operation of any electrical equipment in such an environment constitutes a definite
safety hazard. Keep away from live circuits
Operating personnel must not remove equipment covers. Component replacement
and internal adjustment must be made by qualified maintenance personnel. Do not replace
components with the power cable connected. Under certain conditions, dangerous voltages
may exist even with the power cable removed. To avoid injuries, always disconnect power
and discharge circuits before touching them.
Do not service or adjust alone
Do not attempt internal service or adjustments unless another person, capable of
rendering first aid resuscitation, is present
Observe mar ed areas
Avoid placing the product close to cigarettes, open flames or any source of heat
.
Observe mar ed areas
Under extreme heat conditions do not touch areas of the terminal or antenna that
are marked with this symbol, as it may result in injury
Distance to other equipment
Do not move the antenna closer to radars than the minimum safe distance
specified in the installation manual - it may cause damage to the antenna.
Minimum safe distance 1.2m.
Note:
Failure to comply with the rules above will void the warranty!!!
