(3) Battery LED Indicator:
Trigger this function by any one of the following
actions:
Option 1. Open the cover of the case.
Option 2. Pick up the earbud from the case.
Option 3. Put the earbud back into the case.
The four LED indicators correspond to different
battery levels:
Step 6: Turn on the Bluetooth of your
smartphones, then select the "P1-R"
to pair with your smartphone, it would be
RESET successfully. (If both P1-R and
P1-L show in the Bluetooth list at the
same time, please do not connect but
repeat step 4- step 6, until only P1-R
shows in Bluetooth list of your smartphone).
Step 5: Turn on both earbuds and keep
the two earbuds "within 5 cm" during the
whole process (the most important key
to back to stereo mode);
Step 4: Put both earbuds into the charging
case and wait 10 seconds.
RESET
Reset your earbuds if you can’t go back to the stereo mode or if you can only hear
sound on either side:
Step 1: Clear up“P1-L” and “P1-R”
on the Bluetooth list of your cell phones,
then turn off the Bluetooth in your cell phones;
Step 2: Pick up both the left and right
earbuds and long press the power keys up
to 5 seconds to turn off the earbuds;
Step 3: Press and hold the power keys up
to 15 seconds until you hear the voice
prompt of “RESET” from BOTH earbuds;
1
P1-L
3
15s
A
Turn on
5
<5cm
B
3s
Note: Charge the charging casebefore first
use of earbuds.Place the earbuds in the
charging case before you start charging.
Clean the charging pin on regular basis to
prevent poor connection.
4
5s
2Turn off
Reset
10s
R
P1-R
6
9 10English English
