Transonic TC-1901LCD Manual de usuario
Instruction Manual
MODEL: TC-1901LCD
Please read these instructions carefully and retain for future reference.
19 Colour LCD Television"
1
Help line
Help line
For assistance during normal working hours (9am-5pm,Mon-Fri, New Zealand local time) call
Oriental Pacific International Ltd
NZ call:0800 89 85 80
Email:[email protected]
IMPORTANT SAFEGUARDS
The graphic symbol is used in this manual or on the back cover of the set mean the
following:
Read this manual in full before use.
The lightning flash symbol is intended to alert the user to the enclosures that
contain hazardous voltages.Class I Double insulated Appliance.
The exclamation symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
When using any electrical apparatus always observe safety regulations and use
basic safety precautions to reduce the risk of fire, electric shock and personal
injury; including the following.
Read, Keep and Follow these instrucitions, heeding all Warnings.
INTRODUCTION
2
IMPORTANT SAFEGUARDS
WARNING! No objects filled with liquid, such as vases, shall be placed on this equipment or in any position
where liquid may fall into this equipment or any other electrical apparatus.
WARNING! Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashes and is strictly
for indoor use only.
WARNING! Do not insert any objects into any openings of this equipment or any other electrical apparatus.
WARNING! Do not remove any cover.
WARNING! Not for use in tropical humid climates.
WARNING! Do not immerse in any liquid whilst in use or clearing. Clean only with a damp cloth, cry with
a dry towel. Do not use harsh abrasives as these may damage the plastic parts.
WARNING! Do not block any ventilation openings. Keep away from curtains. newspapers and restricted
areas. Install in accordance with any specific manufacturer's instructions. Always allow a sufficient gap around
the apparatus to avoid overheating.
WARNING! Do not install near any heat sources such as radiators, gas heaters, stoves or other apparatus
(including amplifiers) that produce heat. Do not leave in direct sunlight.
WARNING! Keep out of reach of young children. This apparatus is not suitable for use by young children
or infirm persons without supervision. Young children must be supervised to ensure that they do not play with
the apparatus. Ensure young children have enough knowledge to operate the equipment safety if they do
have access to this equipment.
WARNING! Do not abuse or damage a power cord. If any power cord is damaged, it must be replaced by
the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. A replaceable
cord must be replaced with an authorised replacement from an authorised service agent only.
WARNING! Only use attachments/accessories specified by the manufacturer.
WARNING! Unplug completely from the power source this apparatus during lightening storms or when
unused for long periods of time.
WARNING! If this apparatus is to be used by a third party, please supply these instructions with it.
WARNING! Attention is drawn to the environmental aspects of disposing of any battery.
WARNING! Refer all servicing to qualified personal. Servicing is required when the apparatus has been
damaged in any way, such as when the power supply cord or plug is damaged,liquid has been spilled or obj-
ects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally or has been dropped.
WARNING! For household use only, this apparatus is not intended for commercial use.
WARNING! No liability will be accepted for any personal injury or damage caused by failure to follow these
instructions.
WARNING! Do not place any naked flame source, such as lighted candles on any electrical apparatus.
WARNING! Connect to a suitable 230-240V - 50 Hz power supply only. This equipment must be connected
to a mains socket with a protective earth connection suitable for class 1 equipment.
3
Warning
Warning
REGULATORY INFORMATION
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user encouraged to try to correct the interference by one or
more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user s authority to operate the equipment.’
CAUTION:
Do not attempt to modify this product in any way without written authorization from supplier. Unauthorized
modification could void the user’s authority to operate this product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated”dangerous voltage”within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing )instructions in the literature accompanying the appliance.
4
Owner'sManual
Safety instructions
Safety instructions
WARNING :
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat source such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety.
When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs.
11. Only use the accessories specified by the
manufacturer.
5
Safety instructions
Safety instructions continued
12. Use only cart, stand, tripod, bracket, or table specified
by the manufacturer or sold with the apparatus.
13. Unplug this apparatus during lightning storms or when
unused for a long time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way.
Note
- If the TV is cold, there may be a small flicker” when you turn it on.“
- Avoid touching the LCD screen or holding your finger(s) against it.
CAUTION connecting the Power Cord
Do not overload wall outlets. Overloaded wall outlets could damage the TV and could result to electric shock or fire.
Periodically examine the cord of your appliance; if its appearance indicates damage or deterioration, unplug it. Stop
using it until you have it replaced with a cord authorized by your dealer. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked or pinched.
On Disposal
- The fluorescent lamp used in this product contains a small amount of mercury
- Disposal of this product must be carried out in accordance to the regulations of your local authority.
13
2
6
8
FRONT AND BACK
CONNECTIONS
OF LCD
3
REMOTE CONTROL
5
4
Power Cord Connection
VGA Connection
AV Connection
YPbPr Connection
S-Video Connection
Antennas Connection
10
11
11
10
9
9
Remote control instructions in TV mode
Remote control instructions in TELETEXT mode
Remote control setup
14
15
7
PACKING LIST
2
16
17
19
17
19
Sound menu
Picture menu
Overview menu
Setting menu
6CONFIGURATION
OF THE LCD
6
Contents
Help line & Important safeguards
Warning
Safety instructions
Contents
1
5
4
INTRODUCTION
HDMI Connection 12
TELETEXT OPERATION 21
22
TROUBLESHOOTING
AND ADVICE
7
23
SPECIFICATIONS
8
GUARANTEE CARD
924
BASIC
AINSTALL TION
Channel setting menu
2. PACKING LIST
Remote Control
1.5V
1.5V
AAA Batteries
User Manual
LCDTVSET
7
Power Cord
Audio Cable
3 5mm plug 2 X RCA plug(. )-
POWER MUTE SOURCE
PMODE SMODE SLEEP
1234
5678
0
TV MENU
V-
P-
SUBTITLE HOLD SIZE REVEAL
I/II
-/--
V
+
P+
EXIT
9
TEXT DISPLAY
MIX INDEX CANCEL SUBPAGE
OK
ENTER
PACKING LIST
Instruction Manual
MODEL: TC-1901LCD
Please read these instructions carefully and retain for future reference.
19 Colour LCD Television"
8
FRONT BACK CONNECTIONS OF LCD3. AND TV
Back View and Control Connections
7. VIDEO AUDIO: Connect the Video Audio output jack
of DVD or VCR
//
.
8. S-VIDEO: Connect the S-VIDEO output jack of
9. RF: Connect the antenna.
Front View
3. HDMI: Connect the HDMI output jack of DVD.
2. VGA: Connect the PC-RGB output jack of PC.
4. YPbPr: Connect the YPbPr output jack of DVD or VCR.
6. AUDIO : Connect the right Audio out put jack of
DVD or VCR for Video/S-VIDEO.
DVD or VCR.
AUDIO VIDEO
L
R
1. DC IN: DC input socket.
DC 12V
5. Audio input: For YPbPr video or PC 3 5mm stereo
socket.
,.
10. AC IN: Main power input.
Note Do not connect DC IN and AC IN at same time.
:
12
3
456789
1.Press POWER button to turn standby mode“”
on or off.
2.Press P+ or P- to scan through channels.“”“”
4.Press MENU to bring up the main menu on“”
the screen.
5.Press SOURCE to select the input source“” .
3.Press V+ or V- to increase or decrease“”“”
the sound level.
6
7
FRONT BACK CONNECTIONS OF LCDAND TV
V+V-P+
MENU
SOURCE
POWER
P-
5 4 132
AC IN
10
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your LCD V to switch . The power indicator on the front panel lights up inT the unit on
Green.
4. BASIC AINSTALL TION
ConnectionAntennas
9
VHF TV ANTENNA
UHF TV ANTENNA
75 OHM COAXIAL CABLE
300 OHM FLAT CABLE
To TV ANTENNA JACK
Important:Never connect DC power and main power at same time.It may cause the damage to the
LCD TV.
INSTALLATION OF ANTENNA
300 OHM 75 OHM ADAPTOR
75 OHM DIN
Connect the 75 OHM coaxial cable from the antenna to the antenna socket on the rear panel, as
shown above.
NOTES:
For better reception, especially in outlying areas or where ghost or interference happens, an external
roof-mounted antenna is recommended.
For UHF TV reception, use the specified UHF antenna. Consult the local AV technician.
When using 300 OHM flat cable, a 300 OHM-75 OHM adapter should be adopted for a proper
connection to the antenna jack (The adaptor not supplied).
BASIC AINSTALL TION
AC IN
Tabla de contenidos
Otros manuales de Televisor LCD de Transonic
