Transition Networks E-100BTX-FX-05 Manual de usuario

USER’S GUIDE

E-100BTX-FX-05

Stand-Alone Media Converter

• Fast Ethernet™

• Copper to Fiber

• 100Base-TX to 100Base-FX

• Extended Temperature

Transition Networks E-100BTX-FX-05

Fast Ethernet™ Media Converter

connects 100Base-TX shielded or

unshielded twisted-pair copper cable to

100Base-FX fiber-optic cable.

The E-100BTX-FX-05 series of Media Converters include both standard

temperature and extended temperature models. (Part numbers for the extended

temperature models are listed on page 2.)

Standard Temperature Models:

* Typical maximum cable distance. (Actual distance is dependent upon the physical

characteristics of the network installation.) Installation . . . . . . . . . . . . . . . . . .3

Operation . . . . . . . . . . . . . . . . . . .5

Cable Specifications . . . . . . . . . . .7

Technical Specifications . . . . . . . .9

Fault Isolation and Correction . .10

Compliance Information . . . . . . .12

Part Number Port One - Copper

100Base-TX

Port Two - Duplex Fiber-Optic

100Base-FX

E-100BTX-FX-05 RJ-45

100 m (328 ft)*

ST, 1300 nm multimode

2 km (1.2 miles)*

E-100BTX-FX-05(SC) RJ-45

100 m (328 ft)*

SC, 1300 nm multimode

2 km (1.2 miles)*

E-100BTX-FX-05(MT) RJ-45

100 m (328 ft)*

MT-RJ, 1300 nm multimode

2 km (1.2 miles)*

E-100BTX-FX-05(SM) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

20 km (12.4 miles)*

E-100BTX-FX-05(SMLC) RJ-45

100 m (328 ft)*

LC, 1310 nm singlemode

20 km (12.4 miles)*

E-100BTX-FX-05(LH) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

40 km (24.9 miles)*

E-100BTX-FX-05(XL) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

60 km (37.3 miles)*

E-100BTX-FX-05(LW) RJ-45

100 m (328 ft)*

SC, 1550 nm singlemode

80 km (49.7 miles)*

E-100BTX-FX-05

Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)

The Media Converters with the “HT” extension in the part number can be put into

service in an extended termperature environment from -25°C to 65°C (-13°F to

149°F).

Standard Temperature Models:

* Typical maximum cable distance. (Actual distance is dependent upon the physical

characteristics of the network installation.)

Optional Accessories (sold separately)

Part Number Description

E-MCR-03 12-Slot Media Converter Rack (includes universal internal power

supply) 17 x 15 x 5 in. (432 x 381 x 127 mm)

WMBL Optional Wall Mount Brackets

Length: 4.0 in. (102 mm), Fits converter length: 4.7 in. (119 mm)

SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone Wide-

Input; Output: 12.6VDC, 1.0 A

SPS-1872-CC Optional External Power Supply; 18-72VDC Piggy-Back Wide-

Input; Output: 12.6VDC, 1.0 A

Part Number Port One - Copper

100Base-TX

Port Two - Duplex Fiber-Optic

100Base-FX

E-100BTX-FX-05(HT) RJ-45

100 m (328 ft)*

ST, 1300 nm multimode

2 km (1.2 miles)*

E-100BTX-FX-05(SCHT) RJ-45

100 m (328 ft)*

SC, 1300 nm multimode

2 km (1.2 miles)*

E-100BTX-FX-05(SMHT) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

20 km (12.4 miles)*

E-100BTX-FX-05(LHHT) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

40 km (24.9 miles)*

E-100BTX-FX-05(XLHT) RJ-45

100 m (328 ft)*

SC, 1310 nm singlemode

60 km (37.3 miles)*

E-100BTX-FX-05(LWHT) RJ-45

100 m (328 ft)*

SC, 1550 nm singlemode

80 km (49.7 miles)*

[email protected] -- Select the “Transition Now” Link for a Live Web Chat 3

INSTALLATION

CAUTION: Wear a grounding device and observe electrostatic discharge

precautions when setting the 4-position switch and jumper. Failure to observe

this caution could result in damage to, and failure of, the Media Converter.

4-Position Switch

The 4-position switch is located on

the side of the Media Converter.

Use a small flatblade screwdriver or

a similar device to set the recessed

switches. Refer to the drawing to

the right for the locations of the four

individual switches.

1. Auto-Negotiation

UP Enables Autonegotiation for the copper connection (see page 5).

DOWN Disables Autonegotiation for the copper connection.

2. Pause Control Frame

UP Enables Pause Control (see page 6).

DOWN Disables Pause Control.

3. Link Pass-Through

UP Enables Link Pass-Through (see page 6).

DOWN Disables Link Pass-Through.

4. Far-End Fault

UP Enables Far-End Fault (see page 6).

DOWN Disables Far-End Fault.

AutoCross™ Jumper

The AutoCross™ feature allows either straight-through (MDI) or crossover

(MDI-X) cables to be used when connecting to devices such as hubs,

transceivers, or network interface cards (NICs). AutoCross™ determines the

characteristics of the cable connection and automatically configures the unit

to link up, regardless of the cable configuration.

The jumper is located on the circuit board inside the Media Converter

housing. To set the jumper:

1. Using a small screwdriver, remove the four (4)

screws that secure the cover and carefully remove

the cover from the Media Converter.

2. Locate the J3 jumper on the circuit board and using

small needle-nosed pliers or similar device, move the

jumper to the desired position. (Refer to the drawing

to the right.)

3. Carefully replace the cover on the Media Converter

and replace the four (4) screws that secure the cover

to the Media Converter.

Link Pass-Through (UP=ON)

Pause (UP=ON)

uto-Negotiation (UP=Enabled)

Far End Fault (UP=ON)

1234

Disable AutoCross

Enable AutoCross

J 3

E-100BTX-FX-05

Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)

INSTALLATION -- Continued

Installing the Cable

FIBER

1. Locate or build 100Base-FX compliant fiber cable with male, two-

stranded TX to RX connectors installed at both ends.

2. Connect the fiber cables to the Media Converter as described:

• Connect the male TX cable connector the female TX port.

• Connect the male RX cable connector to the female RX port.

3. Connect the fiber cables to the other device (another Media Converter,

hub, etc.) as described:

• Connect the male TX cable connector the female RX port.

• Connect the male RX cable connector to the female TX port.

COPPER

1. Locate or build 100Base-TX compliant copper cables with male, RJ-45

connectors installed at both ends.

2. Connect the RJ-45 connector at one end of the cable to the RJ-45 port on

the Media Converter.

3. Connect the RJ-45 connector at the other end of the cable to the RJ-45

port on the other device (switch, workstation, etc.).

Connect the fiber cable

to the Media Converter

as shown.

Connect the fiber cable

to the other device

(media converter,

hub, etc.) as shown

RJ-45 port

on the Media

Converter

RJ-45 port

on the other device

(switch, work station, etc.)

[email protected] -- Select the “Transition Now” Link for a Live Web Chat 5

INSTALLATION -- Continued

Power the Media Converter

1. Install the power adapter cord to the back of the Media Converter.

2. Connect the power adapter plug to AC power.

3. Verify that the Media Converter is powered by observing the illuminated

LED power indicator light.

Consult the User’s Guide for the Transition Networks SPS1872-xx DC External

Power Suppy for powering the Media Converter.

OPERATION

Using Status LEDs

Use the status LEDs to monitor the E-100BTX-FX-05 Media Converter

operation in the network.

Power Illuminated green LED indicates connection to external AC power.

SDF Signal Detect/Fiber: Steady green LED indicates the fiber port is

connected to the device.

SDC Signal Detect/Copper: Steady green LED indicates the RJ-45

twisted-pair copper port is connected to the device.

RXC Receive/Copper: Flashing green LED indicates the packets are seen

on the twisted-pair copper RJ-45 port.

RXF Receive/Fiber: Flashing green LED indicates the packets are seen

on the fiber port.

Auto-Negotiation

When the Auto-Negotiation feature is activated (see page 3), the Media

Converter brings up the copper links in the highest speed and mode possible

for all the attached network devices.

NOTE: The E-100BTX-FX-05 series Media Converter does NOT support rate

conversion between 10Mb/s, 100Mb/s, and 1000Mb/s network devices.

Fiber UTP/STP

Power

RXC

RXF

SDF

SDC

E-100BTX-FX-05

Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)

OPERATION -- Continued

Pause Control Frame

The Pause Control Frame feature can improve network performance by

allowing one end of the link to signal the other to discontinue frame

transmission for a set period of time to relieve buffer congestion.

NOTE: If the Pause Control feature is present on ALL network devices

attached to the Media Converter(s), enable the Pause Control feature on the

Media Converter(s). Otherwise, disable the Pause Control feature (see page 3).

Link Pass-Through

When the Link Pass-Through feature is activated (see page 3), a fault on one

side of the Media Converter stops the signal and data transmission on the

other side of the Media Converter. If the Media Converter does not detect a

good link on the copper side, the Media Converter disables all transmission

(including active-idle) on the fiber side.

Far-End Fault

When the Far-End Fault feature is activated (see page 3), a fault on an

incoming fiber link causes the Media Converter to transmit a Far-End Fault

signal on the outgoing fiber link. In addition the Far-End Fault signal also

activates the Link Pass-Through, which, in turn, disables the link on the

copper portion of the network.

100Base-TX

Device Media Converter 100Base-FX

Device

Original Fault

100Base-TX

Device Media Converter 100Base-FX

Device

Original Fault

Fiber

Copper

Fiber

Copper

Fiber

Copper Copper

(Sends a Far-End

Fault)

Media Converter Media Converter

Fiber

Copper Copper

Media Converter

(Sends a Far-End

Fault)

Media Converter

100Base-TX

Device

100Base-TX

Device

100Base-FX

Device

100Base-FX

Device

[email protected] -- Select the “Transition Now” Link for a Live Web Chat 7

CABLE SPECIFICATIONS

The physical characteristics must meet or exceed IEEE 802.3™ specifications.

Fiber Cable

Bit Error Rate: <10-9

Singlemode fiber (recommended): 9 µm

Multimode fiber (recommended): 62.5/125 µm

Multimode fiber (optional): 100/140, 85/140, 50/125 µm

STANDARD MODELS

E-100BTX-FX-05 1300 nm multimode

Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm

Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm

Link Budget: 11.0 dB

E-100BTX-FX-05(SC) 1300 nm multimode

Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm

Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm

Link Budget: 11.0 dB

E-100BTX-FX-05(MT) 1300 nm multimode

Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm

Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm

Link Budget: 11.0 dB

E-100BTX-FX-05(SM) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -15.0 dBm max: -8.0 dBm

Fiber-optic Receiver Sensitivity: min: -31.0 dBm max: -8.0 dBm

Link Budget: 16.0 dB

E-100BTX-FX-05(SMLC) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -15.2 dBm max: -8.0 dBm

Fiber-optic Receiver Sensitivity: min: -32.5 dBm max: -3.0 dBm

Link Budget: 17.3 dB

E-100BTX-FX-05(LH) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -8.0 dBm max: -2.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 26.0 dB

E-100BTX-FX-05(XL) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 29.0 dB

E-100BTX-FX-05(LW) 1550 nm singlemode

Fiber-optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 29.0 dB

E-100BTX-FX-05

Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)

CABLE SPECIFICATIONS

The physical characteristics must meet or exceed IEEE 802.3™ specifications.

Fiber Cable

Bit Error Rate: <10-9

Singlemode fiber (recommended): 9 µm

Multimode fiber (recommended): 62.5/125 µm

Multimode fiber (optional): 100/140, 85/140, 50/125 µm

EXTENDED TEMPERATURE MODELS

E-100BTX-FX-05(HT) 1300 nm multimode

Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm

Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm

Link Budget: 11.0 dB

E-100BTX-FX-05(SCHT) 1300 nm multimode

Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm

Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm

Link Budget: 11.0 dB

E-100BTX-FX-05(SMHT) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -15.0 dBm max: -8.0 dBm

Fiber-optic Receiver Sensitivity: min: -31.0 dBm max: -8.0 dBm

Link Budget: 16.0 dB

E-100BTX-FX-05(LHHT) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -8.0 dBm max: -2.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 26.0 dB

E-100BTX-FX-05(XLHT) 1310 nm singlemode

Fiber-optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 29.0 dB

E-100BTX-FX-05(LWHT) 1550 nm singlemode

Fiber-optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm

Fiber-optic Receiver Sensitivity: min: -34.0 dBm max: -7.0 dBm

Link Budget: 29.0 dB

[email protected] -- Select the “Transition Now” Link for a Live Web Chat

CABLE SPECIFICATIONS -- Continued

Copper Cable

Category 5:

Gauge: 24 to 22 AWG

Attenuation: 22.0 dB /100m @ 100 MHz

Maximum Cable Distance: 100 meters

• Straight-Through OR Crossover cable may be used.

• Shielded Twisted-Pair (STP) OR Unshielded Twisted-Pair (UTP) may be used

• Pins 1&2 and 3&6 are the two active pairs in an Ethernet™ network .

• RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-

• Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

• Do not use flat or silver satin wire.

Crossover Cable

Straight-Through Cable

Twisted Pair #1

Twisted Pair #2

TECHNICAL SPECIFICATIONS

For use with Transition Networks Model E-100BTX-FX-05(xxxx) or equivalent

Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J

applicable at the date of manufacture.

Standards: IEEE 802.3™

Data Rate: 100 Mb/s

Dimensions: 4.75" x 3.0" x 1.0" (119mm x 76mm x 25mm)

Weight: 3 lb (1.4 kg) (approximate)

MTBF 46,768 hours (MIL217F2 V5.0) (MIL-HDBK-217F)

123,821 hours (Bellcore7 V5.0)

Power Supply: (standard temperature) 12VDC, 500 mA (minimum)

DC Output (extended temperature) 9VDC, 550 mA (minimum)

minimum output regulation: 5%

Connector: 2.1mm barrel, center pin positive

Environment: Tmra* (standard temp): 0 to 50°C (32 to 122°F)

Tmra* (extended temp): -25 to 65°C (-13 to 149°F)

Storage Temperature: -15 to 65°C (5 to 149°F)

Humidity: 10-90%, non condensing

Altitude: 0-10,000 feet

Warranty: Lifetime

*Manufacturer’s rated ambient temperature.

CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare Into Beam

Or View Directly With Optical Instruments.

CAUTION: Use of controls, adjustments or the performance of procedures other than

those specified herein may result in hazardous radiation exposure.

E-100BTX-FX-05

Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)

FAULT ISOLATION and CORRECTION

If the Media Converter fails, isolate and correct the fault by determining the

answers to the following questions and then taking the indicated action:

1. Is the

Power

LED on the Media Converter illuminated?

• Is the power adapter the proper type of voltage and cycle frequency

for the AC outlet?

• Is the power adapter properly installed in the Media Converter and in

the outlet?

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

• Proceed to step 2.

2. Is the SDC LED on the Media Converter illuminated?

• Check the twisted-pair cables for proper connection.

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

• Proceed to step 3.

3. Is the SDF LED on the Media Converter illuminated?

• Check the fiber cables for proper connection.

• Verify that the TX and RX cables on the Media Converter are

connected to the RX and TX ports, respectively, on the other device.

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

• Proceed to step 4.

4. Is the RXC LED on the Media Converter flashing?

• If there is no activity on the UTP/STP port, proceed to step 5.

• If there is activity on the UTP/STP port, disconnect and reconnect the

twisted-pair cable to restart the initialization process.

• Restart the workstation to restart the initialization process.

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

• Proceed to step 5.

5. Is the RXF LED on the Media Converter flashing?

• If there is no activity on the fiber port, contact Tech Support.

• If there is activity on the fiber port, disconnect and reconnect the

fiber cable to restart the initialization process.

• Restart the workstation to restart the initialization process.

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

• Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

DECLARATION OF CONFORMITY

Name of Mfg: Transition Networks

6475 City West Parkway, Minneapolis MN 55344 USA

Model: E-100BTX-FX-05(xxxx) Series Media Converters

Part Number(s): E-100BTX-FX-05, E-100BTX-FX-05(SC), E-100BTX-FX-05(MT),

E-100BTX-FX-05(SM), E-100BTX-FX-05(SMLC), E-100BTX-FX-05(LH),

E-100BTX-FX-05(XL), E-100BTX-FX-05(LW), E-100BTX-FX-05(SMHT),

E-100BTX-FX-05(HT), E-100BTX-FX-05(LHHT), E-100BTX-FX-05(XLHT),

E-100BTX-FX-05(LWHT), E-100BTX-FX-05(SCHT)

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the

E-100BTX-FX-05

to which this declaration refers is in

conformity with the following standards.

EN 55022: 1994 Class A; EN 55024:1998; UL 1950, 3rd Edition; 21CFR subpart J

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s)

and Standard(s).

_February 17, 2003_____

Stephen Anderson, Vice-President of Engineering Date

[email protected] -- Select the “Transition Now” Link for a Live Web Chat 11

Technical Support

Technical support is avialable 7:00 AM - 6:00 PM CST (GMT -6:00)

US and Canada: 1-800-260-1312

International: 00-1-952-941-7600

Transition Now

Chat live via the Web with Transition Networks Technical Support.

Log onto www.transition.com and click the Transition Now link.

Web-Based Seminars

Transition Networks provides seminars via live web-based training.

Log onto www.transition.com and click the Learning Center link.

E-Mail

Ask a question anytime by sending an e-mail to our technical support staff.

[email protected]

Address

Transition Networks

6475 City West Parkway

Minneapolis, MN 55344, USA

telephone: 952-941-7600

toll free: 800-526-9267

fax: 952-941-2322

COMPLIANCE INFORMATION

UL Listed

C-UL Listed (Canada)

CISPR22/EN55022 Class A + EN55024

CE Mark

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to correct the

interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus

set out on the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la class A prescrites dans le Règlement sur le

brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb

dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für

entsprechende Gegenmaßnahmen werantwortlich ist.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer

des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures

spécifiques appropriées.

Trademark Notice

All trademarks and registered trademarks are the property of their respective owners.

means - graphic, electronic, or mechanical - without written permission from Transition

Networks.

Printed in the U.S.A. 33210.F

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE

PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in

damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-

Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der

Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über

Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer

Konformität.

Otros manuales para E-100BTX-FX-05

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de Transition Networks

Transition Networks

Transition Networks C/RS232-CF-01 Manual de usuario

Transition Networks

Transition Networks S3290 Manual de usuario

Transition Networks

Transition Networks CBFTF10XX-15X Manual de usuario

Transition Networks

Transition Networks E-CX-TBT-04 Manual de usuario

Transition Networks

Transition Networks E-100BTX-FX-05 Manual de usuario

Transition Networks

Transition Networks PS-CF-01(SC) Manual de usuario

Transition Networks

Transition Networks SFMFF1313-220 Manual de usuario

Transition Networks

Transition Networks SPOEB10 105 Series Manual de usuario

Transition Networks

Transition Networks CSETF1011 Manual de usuario

Transition Networks

Transition Networks J/GE-CF-01(LX1) Manual de usuario

Transition Networks

Transition Networks M/GE-PSW-SFP-01 Manual de usuario

Transition Networks

Transition Networks E-TBT-FRL-05(L) Manual de usuario

Transition Networks

Transition Networks SPSVT26xx-10x Manual de usuario

Transition Networks

Transition Networks SAPTF33xx-100 Manual de usuario

Transition Networks

Transition Networks METTF1011-120 Manual de usuario

Transition Networks

Transition Networks E-100BTX-FX-N-01 Manual de usuario

Transition Networks

Transition Networks M/GE-ISW-SFP-01-PD Manual de usuario

Transition Networks

Transition Networks SGFEB1013-100 Manual de usuario

Transition Networks

Transition Networks DataBand EV Manual de usuario

Transition Networks

Transition Networks E-TBT-FRL-FD-01 Manual de usuario

Transition Networks

Transition Networks E-100BTX-FRL-03(SC) E-100BTX-FRL-03(SM) Manual de usuario

Transition Networks

Transition Networks M/GE-PSW-PSE-01 Manual de usuario

Transition Networks

Transition Networks SSDTF1011-105 Manual de usuario

Transition Networks

Transition Networks E-PSW-SX-01(SC) Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario