Transforming Technologies BFN 8412 Manual de usuario

BFN 8412 Ionizing Blower

Instruction Manual

T R A N S F O R M I N G T E C H N O L O G I E S , L L C

O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L

Description

BFN®Series Ionizers

Dependable, Balanced and Fast. BFN® AC ionizers, from

Transforming Technologies, are built to last. Reliable AC

ionization technology is combined with superior mechani-

cal design to assure years of optimal static neutralizing

performance.

 A full 1 year warranty.

 CE certification.

 All BFN® AC ionizers use titanium alloy emitter points

for long life.

All BFN series AC ionizing blowers are designed for safe

operation under normal use. Safety switches under the

front and rear removable finger guards shut off the unit,

protecting the operator during maintenance.

 Do not operate BFN series products in flammable

or explosive environments.

 Do not insert foreign objects into the air inlet or

outlet.

 Make certain the BFN ionizer is properly grounded

before operation.

 Disconnect the BFN ionizer from any power source

before removing the finger guards.

 Do not open or attempt to repair any BFN series

product. Breaking the manufacturing seal will void

warranty.

Description

Please read these operating instructions thoroughly be-

fore operating the BFN 8412 unit. All BFN series devices

require a grounded power source for proper operation.

BFN series products are NOT suitable for use in flamma-

ble or explosive environments.

BFN 8412 AC Extended Range Ionizing Blower

The BFN 8412 extended range ionizing blower, with AC

technology, provides excellent balance and stability for

secure workstation protection. Designed to cover a broad

3’ x 6’ area, the 8412 uses AC technology to continu-

ously produce a balanced output of positive and negative

air ions.

BFN series AC ionizers from Transforming Technologies

create a dense and well-balanced ionization current.

They are unique in their ability to deliver fast decay

times with low offset voltages. Continuous balance and

decay protection is assured by the reliable AC design. An

integrated heater, emitter point cleaner, removable front

and rear fan guards, safety switch combine to make the

BFN 8412 a powerful and reliable ionizer.

Features

 Reliable AC output

 Extended Range

 Integrated heater and emitter cleaner

 Variable fan speed control

 Removable finger guards with auto shut-off sensor

Product Specifications

Power Input

120 V AC, 60 Hz., 350W (max)

2.5A max. when heater is on

220 V AC, 50Hz.

Dimensions

19.7” W x 7.28” H x 7.9”D

(50.0 W x 18.5 H x 20.0 D cm)

Weight

15.2 lb (6.9 kg)

Air Volume

50 CFM –230 CFM (low—high)

Effective Coverage

3’x6’ area coverage

Balance

0+10 volts

Decay Time

< 1.5 seconds @12”, 1000V-

100V, fan speed on high

Heated Air Temperature

Fan Speed Above Ambient

Low 10° F

Hi 7° F

(measured 6” in front of unit)

RH Operating Range

20-60%, non-condensing

Indicators

ON/OFF status light indicator,

detects presence of HV on

emitter points

Temperature

32-122° F (0-50° C)

Ozone Production

< 0.003 ppm, 12” in front of

unit, EPA EQOA577019

Audible Noise

46dB(A) (Distance 1 meter)

Enclosure

Steel

Finish

Powder coat, off white

Approvals

Packing list:

 BFN 8412 ionizing blower

 Power cord

 Instruction manual

 Certificate of

Conformance

Tested in accord with ANSI/ESD STM3.1-2006

Black: Hi Fan Speed

Red: Low Fan Speed

4 5 6 8

1.5 2.5 4 5

4 5 6 8

8 9 10 12

2 5 7 9

8 9 10 12

1’ 2’ 3’ 4’ 5’

Offset voltage and

discharge time de-

termined as per

EOS/ESD Standard

No.3 using 6” x6”

20 pF charge plate

monitor. Dis-

charge times are

in seconds from

1000V to 100 V.

Discharge times

are slightly longer

for 230V, 50 Hz

Operating guide

1. Power Connection

Properly locate and install the ionizer into the proper posi-

tion and connect the power cord. Rotate the on/off, fan

speed knob clockwise to turn on the unit. Continue rotating

the knob to achieve the desired fan speed.

2. Bracket Adjustment

To adjust the angle of operation of the BFN 8412 ionizer,

loosen the mounting knobs that secures the bracket and

loosen the left gear completely. Now adjust the unit to the

required angle and re-tighten the knobs.

Note: Failure to loosen the bracket knobs sufficiently

may result in damage to the bracket mounting system.

3. Periodic Maintenance

The only maintenance required for BFN series ionizers is

the periodic cleaning of the emitter points, inlet and outlet

finger guards and the fan assembly. Emitter point cleaning

affects the static decay ability of the ionizer and is impor-

tant for maintaining its optimal performance.

Emitter point cleaning: All BFN series ionizing blowers

include an integrated emitter point cleaning brush on the

inlet fan guards. Slide the emitter point cleaner to the left,

then to the right several times, until points are clean. When

finished, return the point cleaning brush to its resting posi-

tion.

A B C

Air outlet disassembly

A. Press the two buttons on the bottom of plastic cover

until they release from slots.

B. Press the top of the front cover in and lightly pull the

front cover upwards

C. Completely remove cover and set aside.

Internal Fan Cleaning

After removing both front and rear fan guards, the emit-

ter points and fan assembly will be unobstructed, for

easy deep cleaning. Use a soft brush, Isopropyl Alcohol

and compressed air to remove any foreign matter.

Note: The frequency of cleaning required for optimal

performance from BFN ionizers depends on the environ-

ment in which the BFN series ionizer operates.

When finished cleaning, replace both front and rear fan

guards.

Internal fan cleaning: All BFN series ionizing blow-

ers offer convenient cleaning of the internal fan assem-

bly. Use the following procedure to maintain cleanliness.

Air Outlet Assembly

A. Line up the plastic latches with the corresponding

grooves of the unit.

B. Press the top and bottom of the front cover in

and lightly push the front cover down

C. Make sure the cover is locked in to the unit.

B C

Caution: BFN series products have safety relay

switches where the front and rear fan guards at-

tach to the unit. These relays disable the fan/

ionizer operation when either fan guard is re-

moved. Take care when attaching the fan guards

to assure proper functioning of the product.

Periodic Verification:

BFN ionizer have no user serviceable parts and the technol-

ogy requires no calibration because of the inherently stable

ionization output from the AC emission. Periodic verification

is recommended, per ANSI/ESD SP3.3-2006 Periodic Verifi-

cation of Air Ionizers. Verification frequency may be set by

the individual user, but is recommended to be not less than

one time per year.

Service and Warranty

Transforming Technologies, LLC provides a limited war-

ranty for the BFN Series Ionizers. All new products are

guaranteed to be free from defects in material and work-

manship for a period of one (1) year from the date of ship-

ment. Liability is limited to servicing (after evaluating, re-

pairing or replacing) any product returned to Transforming

Technologies. The company does not warrant damage due

to misuse, neglect, alteration or accident. In no event shall

Transforming Technologies be liable for collateral or conse-

quential damages. To receive service under warranty,

please contact Transforming Technologies Technical Sup-

port.

About Transforming Technologies

Since 1998, Transforming Technologies has helped elec-

tronic manufacturing facilities to protect their products and

processes from the many serious problems associated with

static electricity.

Transforming Technologies offers a wide range of

unique and outstanding products to detect, protect, elimi-

nate and monitor electrostatic charges. Our products are

integral components of an effective static control program.

3719 King Rd | Toledo, OH 43617 | P: 419-841-9552 | F: 419-841-3241 | info@transforming-technologies.com

Tabla de contenidos

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Philips

Philips AC2721 Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario