Transcend SDHC6 Manual de usuario
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
1
Description
Transcend HD Video Card is rated SDHC Class 6
to provide extremely fast data transfer speeds
(guaranteed minimum write speed of 6MB/s) and
assure quick reaction time when used in digital
cameras and camcorders. This card is optimized for
Full HD 1080p video recording, which allows users to
capture every moment in breathtaking detail!
Transcend HD Video Cards also feature a useful
space for labeling and organizing recorded video
content.
Placement
Front Back
Features
•RoHS compliant product.
•Card Lid material: PC (comply with UL94,Flame
Class:HB)
•Operating Voltage: 2.7 ~ 3.6V
•Operating Temperature: -25 ~ 85°C
•Durability: 10,000 insertion/removal cycles
•Compatible with SD Specification Ver. 2.0
•Comply with SD File System Specification Ver. 2.0
•Mechanical Write Protection Switch
•Supports Speed Class Specification up to Class 6
•Supports Copy Protection for Recorded Media (CPRM)
for SD-Audio
•Seamless compatibility with SDMI-compliant digital audio
devices
•Form Factor: 24mm x 32mm x 2.1mm
Pin Definition
SD Mode SPI Mode
Pin No. Name Type Description Name Type Description
1 CD/DAT I/O/PP3Card Detect/Data Line [Bit3] CS I
Chip Select (neg true)
2 CMD PP Command/Response DI I
Data In
3 VSS1 S Supply voltage ground VSS S
Supply voltage ground
4 VDD S Supply voltage VDD S
Supply voltage
5 CLK I Clock SCLK I Clock
6 VSS2 S Supply voltage ground VSS2 S Supply voltage ground
7 DAT0 I/O/PP Data Line [Bit0] DO O/PP
Data Out
8 DAT1 I/O/PP Data Line [Bit1] RSV
9 DAT2 I/O/PP Data Line [Bit2] RSV
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
2
Architecture
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
3
Bus Operating Conditions
• General
Parameter Symbol Min. Max. Unit Remark
Peak voltage on all lines -0.3 VDD+0.3 V
All Inputs
Input Leakage Current -10 10 µA
All Outputs
Output Leakage Current -10 10 µA
• Power Supply Voltage
Parameter Symbol Min. Max. Unit Remark
Supply voltage VDD 2.7 3.6 V
Output High Voltage VOH 0.75* VDD V IOH=-100uA@VDD Min.
Output Low Voltage VOL 0.125* VDD V IOL=100uA@VDD Min.
Input High Voltage VIH 0.625* VDD VDD+0.3 V
Input Low Voltage VIL V
SS-0.3 0.25* VDD V
Power up time 250 ms From 0v to VDD Min.
• Current Consumption
The current consumption is measured by averaging over 1 second.
‧Before first command: Maximum 15 mA
‧During initialization: Maximum 100 mA
‧Operation in Default Mode: Maximum 100 mA
‧Operation in High Speed Mode: Maximum 200 mA
‧Operation with other functions: Maximum 500 mA.
• Bus Signal Line Load
The total capacitance CLthe CLK line of the SD Memory Card bus is the sum of the bus master capacitance CHOST, the bus
capacitance CBUS itself and the capacitance CCARD of each card connected to this line:
CL= CHOST + CBUS + Ν*CCARD
Where N is the number of connected cards.
Parameter Symbol Min. Max. Unit Remark
Pull-up resistance RCMD
RDAT
10 100 kΩTo prevent bus floating
Bus signal line capacitance CL40 pF 1 card
CHOST+CBUS shall not exceed
30 pF
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
4
Single card capacitance CCARD 10 pF
Maximum signal line inductance 16 nH fPP ≤ 20 MHz
Pull-up resistance inside card (pin1) RDAT3 10 90 kΩMay be used for card
detection
Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are
connected separately to the SD Memory Card host.
Host should consider total bus capacitance for each signal as the sum of CHOST, CBUS, and CCARD, these parameters are
defined by per signal. The host can determine CHOST and CBUS so that total bus capacitance is less than the card estimated
capacitance load (CL=40 pF). The SD Memory Card guarantees its bus timing when total bus capacitance is less than
maximum value of CL(40 pF).
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
5
• Bus Signal Levels
As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage.
To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be
within the following specified ranges for any VDD of the allowed voltage range:
Parameter Symbol Min. Max. Unit Remark
Output HIGH voltage VOH 0.75*VDD V IOH = -100 μA @VDD min
Output LOW voltage VOL 0.125*VDD V IOL = -100 μA @VDD min
Input HIGH voltage VIH 0.625*VDD V
DD + 0.3 V
Input LOW voltage VIL VSS – 0.3 0.25*VDD V
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
6
• Bus Timing
Parameter Symbol Min Max. Unit Remark
Clock CLK (All values are referred to min (VIH) and max (VIL)
Clock frequency Data Transfer Mode fPP 0 25 MHz CCARD ≤ 10 pF, (1 card)
Clock frequency Identification Mode fOD 0(1)/100 400 KHz CCARD ≤ 10 pF, (1 card)
Clock low time tWL 10 ns CCARD ≤ 10 pF, (1 card)
Clock high time tWH 10 ns CCARD ≤ 10 pF, (1 card)
Clock rise time tTLH 10 ns CCARD ≤ 10 pF, (1 card)
Clock fall time tTHL 10 ns CCARD ≤ 10 pF, (1 card)
Inputs CMD, DAT (referenced to CLK)
Input set-up time tISU 5 ns CCARD ≤ 10 pF, (1 card)
Input hold time tIH 5 ns CCARD ≤ 10 pF, (1 card)
Outputs CMD, DAT (referenced to CLK)
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
7
Output Delay time during Data Transfer Mode tODLY 0 14 ns CL≤ 40 pF, (1 card)
Output Delay time during Identification Mode tODLY 0 50 ns CL≤ 40 pF, (1 card)
(1) 0 Hz means to stop the clock. The given minimum frequency range is for cases were continues clock is required
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
8
• Bus Timing (High Speed Mode)
Parameter Symbol Min Max. Unit Remark
Clock CLK (All values are referred to min (VIH) and max (VIL)
Clock frequency Data Transfer Mode fPP 0 50 MHz CCARD ≤ 10 pF, (1 card)
Clock low time tWL 7 ns CCARD ≤ 10 pF, (1 card)
Clock high time tWH 7 ns CCARD ≤ 10 pF, (1 card)
Clock rise time tTLH 3 ns CCARD ≤ 10 pF, (1 card)
Clock fall time tTHL 3 ns CCARD ≤ 10 pF, (1 card)
Inputs CMD, DAT (referenced to CLK)
Input set-up time tISU 6 ns CCARD ≤ 10 pF, (1 card)
Input hold time tIH 2 ns CCARD ≤ 10 pF, (1 card)
Outputs CMD, DAT (referenced to CLK)
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
9
Output Delay time during Data Transfer Mode tODLY 14 ns CL≤ 40 pF, (1 card)
Output Hold time tOH 2.5 ns CL≤ 40 pF, (1 card)
Total System capacitance for each line1C
L40 pF (1 card)
1) In order to satisfy severe timing, host shall drive only one card.
HD Video Card Series
4GB~16GB SDHC6 HD Video Card
Transcend Information Inc.
10
Reliability and Durability
Temperature Operation: -25°C / 85°C (Target spec), Storage: -40°C / 85°C
Moisture and corrosion Operation: 25°C / 95% rel. humidity
Storage: 40°C / 93% rel. hum./500h
Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009
Durability 10.000 mating cycles; test procedure: tbd.
Bending 10N
Torque 0.15N.m or +/-2.5 deg
Drop test 1.5m free fall
UV light exposure UV: 254nm, 15Ws/cm² according to ISO 7816-1
X-ray exposure 0.1 Gy of medium-energy radiation (70 keV to 140 keV, cumulative dose per year)
to both sides of the card, according to ISO7816-1.
Visual inspection
Shape and form
No warp page; no mold skin; complete form; no cavities surface smoothness <=
-0.1 mm/cm² within contour; no cracks; no pollution (fat, oil dust, etc.)
Minimum moving force of WP witch 40gf (Ensures that the WP switch will not slide while it is inserted to the connector.)
WP Switch cycles minimum 1000 Cycles(@Slide force 0.4N to 5N)
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Manuales populares de Tarjeta de video de otras marcas
Gainward
Gainward GeForce GTX 690 4GB Manual de usuario
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manual de usuario
MSI
MSI N220GT series Manual de usuario
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manual de usuario
SIIG
SIIG aurora Manual de usuario
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manual de usuario
