TP-Link CZ-190T Manual de usuario
CZ-190T / JTI
CZ-190T
藍芽耳機
Bluetooth headset
使用手冊
User’s Manual
17
Welcome
Thank you for purchasing the Bluetooth headset CZ-190T, we hope the
headset will bring you a whole new delightful feeling of wireless
technology.
18
Contents
BEFORE YOU BEGIN.........................................................................19
(1)CHARGE YOUR HEADSET′S BATTERY.........................................20
(2)START BLUETOOTH FEATURE ON YOUR HANDSET...................21
(3)PAIR YOUR HEADSET.........................................................22
(3)PAIR YOUR HEADSET (CONTINUED).......................................23
(4)TEST AND USE..........................................................................24
USING YOUR CZ-190T....................................................................25
TURNING ON AND OFF..................................................................25
WEARING THE HEADSET...............................................................26
MAKING CALLS............................................................................27
MAKING CALLS (CONTINUED)........................................................28
INDICATOR LIGHTS......................................................................29
AUDIO TONES.............................................................................31
TROUBLE SHOOTING....................................................................33
19
Volume Down
Volume UP
Call Button
Microphone
LED Display
Loud Speake
r
Ear Hook
Charger Jack
BEFORE YOU BEGIN
Take a moment to familiarize yourself with your CZ-190T Headset.
20
(1) CHARGE YOUR HEADSET’S BATTERY
Charge your headset’s battery for about 2
hours:
1 Plug the charger into the charger jack on
top of the headset. The red indicator light
turns on when the battery is charging. It
may take up to 1 minute for the light to
turn on. When the headset’s battery is
fully charged (about 2 hours), the red
indicator turns off.
2 Unplug the charger from the headset.
Note: Headset is not functional while charging.
21
(2) START BLUETOOTH FEATURE ON YOUR
HANDSET
Your phone’s Bluetooth feature is off by default. To use your headset,
turn on the Bluetooth feature in your phone.
For most phones:
1 Select Menu﹥Additional Function﹥Bluetooth.
2 Select SWITCH ON.
Bluetooth feature remains on until you turn it off.
Note: These steps are for most phones. For your phone, see your phone’s user’s guide.
22
(3) PAIR YOUR HEADSET
STEP ONE - PUT HEADSET IN PAIRING NODE
Before your can use your headset, you must pair (link) it with your
phone.
1With the headset power off, press and hold the Call button for 3 to 5
seconds until the blue indicator light turns on and flash. (The light
will flash when you first press the Call button.)
2If the indicator light is remain steadily lit, turn off the headset and
repeat the step 1.
Note: To turn off headset, see “Turning On and Off” page.
Call Button
LED Indicator
23
(3) PAIR YOUR HEADSET (CONTINUED)
STEP TWO - SET THE PHONE TO LOOK FOR YOUR
HEADSET
For most phones:
1On your phone, select Menu﹥Additional Function﹥Bluetooth﹥
Look for Devices.
The phone lists all Bluetooth devices it finds.
2Select CZ-190T.
3Select OK or Yes to pair (link) the device.
4Enter the passkey: 0000
5Select OK.
When your headset is successfully paired with your phone, the blue
and red indicators will flash simultaneously.
Note: These steps are for most phones. For your phone, see your phone’s user’s guide.
24
(4)TEST AND USE
Your phone and headset are now paired and ready to make and
receive calls. To confirm they are operating properly, make a call:
1Place the headset over your ear. See “Wearing the Headset”
2On your phone, dial the number you want to call and Press the
Send Key.
3If your phone and headset are successfully paired, you hear
ringing on the headset.
After you have successfully paired your phone and headset, you do
not need to repeat these initial setup steps each time you use the
headset.
25
USING YOUR CZ-190T
Features and Functions Guide
TURNING ON AND OFF
To turn your headset on, press and hold the Call button for 3 to 5
seconds until the blue indicator light flashes. Then, release the
button.
To turn your headset off, press and hold the Call button for 3 to 5
seconds and then turns off.
To conserve battery power, turn off your
headset when you don’t plan to use it for
a while.
Call
Button
Tabla de contenidos
Otros manuales de Auriculares de TP-Link
