Toshiba T200 Manual de usuario
T200/T200CS 1-1
1.1 Features
The Toshiba T200/T200CS Pen Computer uses extensive Large Scale Integration (LSI), and
Complementary Metal-Oxide Semiconductor (CMOS) technology to provide minimum size
and weight, low power usage and high reliability. These computers include the following:
❑Microprocessor
The T200/T200CS uses an SL Enhanced Intel 486DX2-40 microprocessor that
operates at 40 MHz and 3.3 volts.
❑Math co-processor
The T200/T200CS has a math co-processor stored in the i486DX2 microprocessor.
❑Cache memory
The T200/T200CS has an 8 KB cache memory stored in the i486DX2 microprocessor.
❑Disk storage
The T200/T200CS has an internal 1.8-inch IDE 80 Megabyte (MB) Hard Disk Drive
(HDD).
❑Memory
The T200/T200CS comes standard with 4 MB of CMOS RAM. This includes 640
KB of conventional memory and 3,328 KB of extended memory, which can be utilized
as expanded memory compatible with Lotus/Intel/Microsoft Expanded Memory
Specifications (LIM-EMS).
❑Display screen
The T200 has a 9.5-inch high resolution monochrome Liquid Crystal Display (LCD)
which displays 640x480 pixels with a 16-level gray scale, and an electromagnetic
derivative tablet (transreflective).
The T200CS has a 9.5-inch high resolution Supertwist Nematic (STN) color LCD
which displays 640x480 pixels and 256 colors, and an electromagnetic derivative
tablet.
The T200/T200CS internal display controller supports Video Graphics Array (VGA)
on the internal/external display and Super VGA (SVGA) on the external display.
❑Batteries
The T200/T200CS has three different batteries: a main battery, a backup battery, and
a Real Time Clock (RTC) battery.
1-2 T200/T200CS
❑Exp. memory slot
An optional 4, 8, or 16 MB memory card can be installed in the memory slot.
❑PC card slot (Type II, Type III)
The T200/T200CS has two PC card slots which support Personal Computer Memory
Card International Association (PCMCIA) standard version release 2.0 and MiNC
Toshiba modem card.
❑FDD port
An optional external 3.5-inch Floppy Disk Drive (FDD) supports 2HD (1.44 Mbytes)
floppy disks and 2DD (720 Kbytes) floppy disks.
❑Printer port
The T200/T200CS's Centronics-compatible printer interface port can be connected to
the printer through a parallel printer cable.
❑Serial port
The T200/T200CS has one 9-pin serial interface port.
❑Ext. keyboard port
The T200/T200CS has an external keyboard interface port for connection with a PS/2-
compatible keyboard.
❑Ext. monitor port
The T200/T200CS has an external monitor interface port for connection with an
analog VGA or SVGA display.
❑72-pin Expansion port
The T200/T200CS has a 72-pin Expansion port which enables connection of a 72-pin
Expansion connector. The Expansion port allows connection of a PS/2 keyboard,
external monitor, printer, serial I/O and optional 3.5-inch FDD.
❑Stylus
The T200/T200CS has one cordless stylus (pen), which is used to enter information
into the computer. The stylus does not need batteries.
T200/T200CS 1-3
The T200/T200CS Pen Computer is shown in Figure 1-1. Its system configuration is shown
in Figure 1-2.
Figure 1-1 T200/T200CS Pen Computer
Figure 1-2 T200/T200CS System Unit Configuration
1-4 T200/T200CS
1.2 System Unit Block Diagram
Figure 1-3 is a block diagram of the computer's system unit.
* These port signals also output to the 72-pin Expansion port.
Figure 1-3 Block Diagram
T200/T200CS 1-5
The computer's system board is composed of the following major components:
❑SL Enhanced i486DX2-40
❑Super Integration (SI) T9901, which stores the following components:
•Two Direct Memory Access Controllers (DMAC): 82C37
•Two Programmable Interrupt Controllers (PIC): 82C59
•One Programmable Interval Timer (PIT): 82C54
•One Floppy Disk Controller (FDC): TC8565
•Two Serial Input/Output Controllers (SIO): TC8570
•One Variable Frequency Oscillator (VFO): TC8568
•One I/O Controller
•One Printer Port Controller
•One Speaker Controller
❑A Real Time Clock (RTC)
One T9934 chip with 128 bytes of memory is used. Fourteen bytes of memory are
used for the calendar and clock and the remaining 114 bytes for system configuration
data.
OSC (X2) generates 32.768 KHz for RTC.
❑A Keyboard Controller (KBC)
One 80C42 chip is used. This KBC includes the keyboard interface controller and
controls the external keyboard.
❑The following memories:
Standard RAM: 4 MB
Cache memory: 8 KB (inside CPU)
BIOS ROM: 128 KB (96 KB are used)
This ROM contains Initial Reliability Test (IRT),
Basic Input/Output System (BIOS), and video BIOS.
Video RAM: 256 KB
Optional memory cards expand memory to a maximum of 20 MB.
❑VGA display controller (WD90C24A)
This controller controls internal VGA display and external SVGA compatible display.
❑Clock Generator receives 14.31818 MHz (X3) and generates the following frequen-
cies:
•20 MHz for the CPU (CPU operates at 40MHz.)
•14.7477 MHz for the COM
•24 MHz for the FDC and VFO
•16 MHz is used for the System Controller GA
•14.31818 MHz is used for the T9901 (SI)
1-6 T200/T200CS
❑Gate Arrays
System Controller Gate Array
This gate array has the following functions:
•CPU Controller
•Memory Controller
-DRAM Controller
-Compatible Bus Interface Controller
•SMI Controller
•VL Bus Controller
•Bus Controller
-Compatible Bus Interface Controller
-Compatible Access Controller
-DMA Controller
-I/O Controller
•Address Latch Controller
-32-Bit to 16-Bit Controller
-Address Latch
-DMA Address Generator
-Refresh Address Generator
•I/O Register
-Compatible I/O Port
-Saving the data of the Register (in resume) Controller
-Toshiba Special Register
•Processing Speed Controller
•Data Bus Change Controller
•Data Latch
PCMCIA Controller Gate Array
This gate array has the following functions:
•Memory Card Controller
-PCMCIA IC Card Controller
-Toshiba Modem Card Controller
T200/T200CS 1-7
SMI Controller Gate Array
This gate array has the following functions:
•Tablet Controller
-Tablet Microprocessor Communication Controller
-SMI Controller
•Others
-Contrast Adjust PWM Controller
1-8 T200/T200CS
1.3 Optional External 3.5-inch Floppy Disk Drive
The computer's optional 3.5-inch Floppy Disk Drive (FDD) is a thin, high-performance
reliable drive that supports 720-KB (formatted) 2DD and 1.44-MB (formatted) 2HD 3.5-inch
floppy disks.
The computer's FDD is shown in Figure 1-4. The specifications for the FDD are provided in
Table 1-1.
Figure 1-4 3.5-Inch FDD
Table 1-1 3.5-Inch FDD Specifications
Item 2-MB mode 1-MB mode
Storage capacity (KB)
Unformatted 2,000 1,000
Formatted 1,474 737
Number of heads 2 2
Number of cylinders 80 80
Access time (ms)
Track to track 3 3
Average 181 181
Head settling time 15 15
Recording track density (tpi) 135 135
Data transfer rate (Kbps) 500 250
Rotation speed (rpm) 300 300
Recording method Modified Frequency Modulation (MFM)
T200/T200CS 1-9
1.4 1.8-inch Hard Disk Drive
The computer’s 80-MB (formatted) Hard Disk Drive (HDD) is a random access non-volatile
storage device. It has a non-removable 1.8-inch magnetic disk and mini-winchester type
magnetic heads.
The HDD is shown in Figure 1-5. Specifications for the HDD are provided in Table 1-2.
Figure 1-5 1.8-Inch HDD
Table 1-2 1.8-Inch HDD Specifications
Item 80 MB
(ZA1094)
Storage capacity (MB)
Formatted 85.0
Number of disks 2
Data heads 3
Data surfaces 3
Tracks per surface 2,750
Sectors per track 20
Bytes per sector 512
Access time (ms)
Track to track 8
Average 18
Maximum 35
Rotation speed (rpm) 3,571
Data transfer rate (bps)
To/from media 2.5M
Interleave 1:1
Recording method 1-7 RLL
1-10 T200/T200CS
1.5 Monochrome LCD
The monochrome LCD is composed of an LCD module, a Fluorescent Lamp (FL), and an FL
inverter board.
1.5.1 Monochrome LCD Module
The computer's monochrome LCD supports 640 x 480 pixels with a video controller and 16
levels of gray. The video controller includes the functions of the VGA and SVGA for external
display.
The LCD receives vertical and horizontal synchronizing signals, 8-bit data signals (4-bit upper
block data signal and 4-bit lower block data signal), and shift clock for data transmission. All
signals are CMOS-level compatible.
The sidelit LCD is shown in Figure 1-6 and its specifications are provided in Table 1-3.
Figure 1-6 Monochrome LCD
Table 1-3 Monochrome LCD Specifications
Item Specifications
Number of dots (dots) 640 x 480
Dot pitch (mm) 0.27 (W) x 0.27 (H)
Display area (mm) 196 (W) x 147.6 (H)
Contrast 10:1 (typically)
FL current (mA) 5.5 (r.m.s.)
FL frequency (KHz) 39
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Tableta de Toshiba
Toshiba
Toshiba PORTEGE WT20-B Series Manual de usuario
Toshiba
Toshiba Encore WT8-A Series Manual de usuario
Toshiba
Toshiba Excite 7 Manual de usuario
Toshiba
Toshiba Encore mini Manual de usuario
Toshiba
Toshiba WT110 Manual de usuario
Toshiba
Toshiba AT105-SP101L Manual de usuario
Toshiba
Toshiba AT7-A series Manual de usuario
Toshiba
Toshiba PPM75U-01H015 Manual de usuario
Toshiba
Toshiba dynaPad WT12PE-A Series Manual de usuario
Toshiba
Toshiba Encore 2 WT10-A series Manual de usuario
Toshiba
Toshiba WT10-A Series Manual de usuario
Toshiba
Toshiba STOR.E ALU 2 Manual de usuario
Toshiba
Toshiba AT205 Manual de usuario
Toshiba
Toshiba AT205-SP0101L Manual de usuario
Toshiba
Toshiba AT305-SP0260GM Manual de usuario
Toshiba
Toshiba Encore mini Manual de usuario
Toshiba
Toshiba Excite 10 LE Manual de usuario
Toshiba
Toshiba Thrive AT1S0 Series Manual de usuario
Toshiba
Toshiba Encore 2 Write Manual de usuario
Toshiba
Toshiba Excite Pro Manual de usuario
