Toshiba TDP TDP-T9 Manual de usuario

OWNER'S MANUAL (Getting Started)

DATA PROJECTOR

TDP-T9

For more details , please refer to the owner's manual of the CD-ROM version

SAFETY PRECAUTIONS

The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is in-

tended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX-

POSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN

THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold

with this product, will expose you to lead, a chemical known to the State of

California to cause birth defects or other reproductive harm. Wash hands af-

ter handling.

WARNING: This [product] contains mercury. Disposal of mercury may be regulated due

to environmental considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries Alliance: www.eiae.

org.

MODEL NAME: TDP-T9 USA only

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-T9

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. This

equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

USA only

Before Using

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

WARNING: Changes or modiﬁcations made to this equipment, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to

operate the equipment.

WARNING: This Class B digital apparatus complies with Canadian ICES-003. Cet appar-

eil numérique de la classe B est conforme à la norme NMB-003 du Canada.

USA only

CANADA only

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUC-

TIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED

ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFER-

ENCE.

This set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or ﬁre hazard. The safeguards incorporated in this unit will pro-

tect you if you observe the following procedures for installation, use and servicing. This unit

is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read

the owner’s manual carefully, and

follow all the operating and other

instructions.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyes or sight.

2. Power Sources

This product should be operated

only from the type of power source

indicated on the marking label.

If you are not sure of the type of

power supply to your home, con-

sult your product dealer or local

power company.

For products intended to oper-

ate from battery power, or other

sources, refer to the operating

instructions.

4. Ventilation

Openings in the cabinet are pro-

vided for ventilation and to ensure

reliable operation of the product

and to protect it from overheating,

and these openings must not be

blocked or covered. The openings

should never be blocked by plac-

ing the product on a bed, sofa, rug

or other similar surface. This prod-

uct should not be placed in a built-

in installation such as a bookcase

or rack unless proper ventilation

is provided or the manufacturer’s

instructions have been adhered to.

Before Using

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves,

or other products (including ampli-

ﬁers) that produce heat.

6. Water and Moisture

Do not use this product near wa-

ter. - for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be

routed so that they are not likely to

be walked on or pinched by items

placed upon or against them, pay-

ing particular attention to cords at

plugs, convenience receptacles,

and the point where they exit from

the product.

9. Overloading

Do not overload wall outlets;

extension cords, or integral con-

venience receptacles as this can

result in a risk of ﬁre or electric

shock.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

10. Lightning storms

For added protection for this prod-

uct during storm, or when it is left

unattended and unused for long

periods of time, unplug it from the

wall outlet. This will prevent dam-

age to the product due to lightning

and power-line surges. However,

while it is thundering or lightning,

do not touch the apparatus and

any connected cable and/or equip-

ment. This will prevent you from

receiving the electric shock by an

electric surge.

11. Object and Liquid Entry

Never push objects of any kind

into this product through open-

ings as they may touch dangerous

voltage points or short-out parts

that could result in a ﬁre or electric

shock. Never spill liquid of any

kind on the product.

12. Do not place the product

vertically

Do not use the product in the

upright position to project the pic-

tures at the ceiling, or any other

vertical positions. It may fall down

and dangerous.

13. Stack Inhibited

Do not stack other equipment on

this product or do not place this

product on the other equipment.

Top and bottom plates of this

product develops heat and may

give some undesirable damage to

other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

Before Using

Introduction

15. Accessories

Do not place this product on an

unstable cart, stand, tripod, brack-

et, or table. The product may fall,

causing serious injury to a child or

adult, and serious damage to the

product. A product and cart combi-

nation should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the

product and cart combination to

overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall

outlet and refer servicing to quali-

ﬁed service personnel under the

following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or ob-

jects have fallen into the product.

c) If the product has been exposed

to rain or water.

d) If the product does not operate

normally by following the operat-

ing instructions. Adjust only those

controls that are covered by the

operating instructions as an im-

proper adjustment of other con-

trols may result in damage and will

often require extensive work by a

qualiﬁed technician to restore the

product to its normal operation.

e) If the product has been dropped

or damaged in any way.

f) When the product exhibits a dis-

tinct change in performance - this

indicates a need for service.

17. If glass components, in-

cluding lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp. If such parts should break,

please handle with care to avoid

injury and contact your dealer for

repair service. The broken pieces

of glass may cause to injury. In

the unlikely event of the lamp rup-

turing, thoroughly clean the area

around the projector and discard

any edible items placed in that

area.

18. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other haz-

ards. Refer all servicing to quali-

ﬁed service personnel.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

19. Replacement Parts

When replacement parts are re-

quired, be sure the service techni-

cian has used replacement parts

speciﬁed by the manufacturer or

have the same characteristics as

the original part.

Unauthorized substitutions may

result in ﬁre, electric shock, or

other hazards.

(Replacement of the lamp only

should be made by users.)

20. Safety Check

Upon completion of any service

or repairs to this product, ask

the service technician to perform

safety checks to determine that

the product is in proper operating

condition.

21. Do not leave thermalpaper

documents or easily de-

formed items on top of the

unit or near the air exhaust

for long periods of time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

22. Do not use the product in

a closed installation state.

Do not place the product in a box

or in any other closed installation

state. Otherwise it may overheat.

This could result in a risk of ﬁre.

23. Do not look into the laser

light source of the remote

control or direct the laser

pointer toward a person

or a mirror.

The laser beam may cause dam-

age to the eyes or sight.

Before Using

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 240V

200 240V

Plug

configuration Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to

ship your projector. For maximum protection, repack the set as it was originally packed at

the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on

the lens and the crucial internal parts. To prevent the unit from possible damage, do not

use the unit for at least 2 hours when there is an extreme or sudden change in tempera-

ture.

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening

their lives, and darkening the screen.

• Do not use this product in the upright position or tilt it up or down by more than 20° from

level. Doing so may cause a failure or shorten the life of the product.

• Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

• Moving the projector from a low-temperature room to a high-temperature room may

cause condensation on the lens or internal parts in the instrument. If you continue to use

it in that situation, the malfunction may result. Ensure to wait until the condensation natu-

rally disappears.

• In a high altitude location where air is thin, cooling efﬁciency is reduced so use the pro-

jector with [Fan mode] set to [High].

IMPORTANT PRECAUTIONS (Continued)

EXEMPTION CLAUSES

• Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., ﬁre not liable to Toshiba Corporation, acts

by third parties, other accidents, or use under abnormal conditions including erroneous or

improper operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost proﬁt, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Instruction Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from mal-

functions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time. They will leave marks on the ﬁnish.

If cleaning with a chemically saturated cloth, be sure to follow the product’s precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

• The set of projector is hot after use. Handle with care.

• Do not use the projector while holding it in your hands or lap.

• Do not use the projector near a power source and the like, or in locations like a ship

or vehicle that are subject to vibration or shock. Doing so may lead to a malfunction or

shorten service life.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Toshiba

Toshiba

Toshiba TDP-S9 Instrucciones de instalación

Toshiba

Toshiba TLP541E Manual de usuario

Toshiba

Toshiba TDP-F10U Manual de usuario

Toshiba

Toshiba TLP-T501U Series Manual de usuario

Toshiba

Toshiba TDP-S1-US Manual de usuario

Toshiba

Toshiba TLP-450 Guía de referencia

Toshiba

Toshiba TDP-T90 Manual de usuario

Toshiba

Toshiba TDP-XP1U - XGA DLP Projector Manual de usuario

Toshiba

Toshiba TDP-D1-US Manual de usuario

Toshiba

Toshiba TLP-S40 Manual de usuario

Toshiba

Toshiba TLP-510U Manual de usuario

Toshiba

Toshiba TDP-TW300 Manual de usuario

Toshiba

Toshiba TLP-X150U Manual de usuario

Toshiba

Toshiba MT400 Manual de usuario

Toshiba

Toshiba TLP-510U Manual de usuario

Toshiba

Toshiba TDP-PX10 Manual de usuario

Toshiba

Toshiba TLP-X3000AU Manual de usuario

Toshiba

Toshiba TDP-EW25 Manual de usuario

Toshiba

Toshiba TDP-MT700 Manual de usuario

Toshiba

Toshiba TDP-PX10U - XGA DLP Projector Manual de usuario

Toshiba

Toshiba TLP-S10 Manual de usuario

Toshiba

Toshiba TDP-MT400 Manual de usuario

Toshiba

Toshiba TDP-P8 Manual de usuario

Toshiba

Toshiba X100U - TLP XGA LCD Projector Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario