Toshiba TDP-P7U Manual de usuario

TDP-P7

FREEZE

MUTE

LASER

AUTO

TIMER

RGBVIDEO

R-CLICK/

CANCEL

QUICK

ENTER

STANDBY

VOL ZOOM

Trademarks

* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-

ments Incorporated (U.S.A.).

* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).

* S-VGA is a registered trademark of Video Electronics Standards Association.

* Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).

Note that even in the absence of explanatory notes, attention is paid to the trademarks of the various companies and to

the product trademarks.

DATA PROJECTOR

TDP-P7

OWNER’S MANUAL

E-I

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.

DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will

expose you to lead, a chemical known to the State of California to cause birth defects or other

reproductive harm.

Wash hands after handling

WARNING: This [product] contains mercury. Disposal of mercury may be regulated due to environmental

considerations. For disposal or recycling information, please contact your local authorities or the

Electronic Industries Alliance: www.eiae.org.

USA only

MODEL NAME: TDP-P7

FCC Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiates radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties

authorized by Toshiba, could void the user’s authority to operate the equipment.

Notice: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe

A est conforme àla norme NMB-003 du Canada.

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

USA only

CANADA only

E-II

SAFETY PRECAUTIONS (Continued)

CAUTION

Do not look at the laser pointer’s light source.

Be sure to heed the following. Pointing the laser beam at

the eyes could lead to reduced vision or vision impairment.

•Never look at the laser pointer’s light source.

•Do not point the laser beam at people.

•Do not let children use the laser pointer. This label is located on the side of the remote control.

E-III

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS

OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET

FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock

or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for

installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired

by the user.

DO NOT REMOVETHE CABINET COVER, ORYOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read the

owner's manual carefully, and follow all the

operating and other instructions.

2. Power Sources

This product should be operated only from

the type of power source indicated on the

marking label.

If you are not sure of the type of power

supply to your home, consult your product

dealer or local power company.

For products intended to operate from

battery power, or other sources, refer to the

operating instructions.

3. Source of Light

Do not look into the lens while the lamp is

on. The strong light from the lamp may

cause damage to your eyes or sight.

4. Ventilation

Openings in the cabinet are provided for

ventilation and to ensure reliable operation

of the product and to protect it from

overheating, and these openings must not

be blocked or covered.

The openings should never be blocked by

placing the product on a bed, sofa, rug or

other similar surface. This product should

not be placed in a built-in installation such

as a bookcase or rack unless proper

ventilation is provided or the manufacturer's

instructions have been adhered to.

E-IV

IMPORTANT SAFETY INSTRUCTIONS (Continued)

5. Heat

The product should be situated away from

heat sources such as radiators, heat

registers, stoves, or other products (including

amplifiers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool and the

like.

7. Cleaning

Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners

or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them, paying

particular attention to cords at plugs,

convenience receptacles, and the point

where they exit from the product.

9. Overloading

Do not overload wall outlets; extension cords,

or integral convenience receptacles as this

can result in a risk of fire or electric shock.

E-V

10. Lightning storms

For added protection for this product during

storm, or when it is left unattended and

unused for long periods of time, unplug it

from the wall outlet. This will prevent

damage to the product due to lightning and

power-line surges.

However, while it is thundering or lightning,

do not touch the apparatus and any

connected cable and/or equipment.

This will prevent you from receiving the

electric shock by an electric surge.

11. Object and Liquid Entry

Never push objects of any kind into this

product through openings as they may touch

dangerous voltage points or short-out parts

that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

12. Do not place the product vertically

Do not use the product in the upright position

to project the pictures at the ceiling, or any

other vertical positions. It may fall down and

dangerous.

13. Stack Inhibited

Do not stack other equipment on this product

or do not place this product on the other

equipment. Top and bottom plates of this

product develops heat and may give some

undesirable damage to other unit.

14. Attachments

Do not use attachments not recommended

by the product manufacturer as they may

cause hazards.

E-VI

IMPORTANT SAFETY INSTRUCTIONS (Continued)

15. Accessories

Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product

may fall, causing serious injury to a child or

adult, and serious damage to the product. A

product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall outlet and

refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is

damaged.

b) If liquid has been spilled, or objects have

fallen into the product.

c) If the product has been exposed to rain or

water.

d) If the product does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operating instructions as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualified technician to restore the

product to its normal operation.

e) If the product has been dropped or damaged

in any way.

f) When the product exhibits a distinct change

in performance - this indicates a need for

service.

17. If glass components, including

lens and lamp, should break,

contact your dealer for repair

service.

This product incorporates glass components,

including a lens and a lamp. If such parts

should break, please handle with care to

avoid injury and contact your dealer for repair

service. The broken pieces of glass may

cause to injury. In the unlikely event of the

lamp rupturing, thoroughly clean the area

around the projector and discard any edible

items placed in that area.

18. Servicing

Do not attempt to service this product

yourself as opening or removing covers may

expose you to dangerous voltage or other

hazards. Refer all servicing to qualified

service personnel.

E-VII

19. Replacement Parts

When replacement parts are required, be

sure the service technician has used

replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result in fire,

electric shock, or other hazards.

(Replacement of the lamp only should be

made by users.)

20. Safety Check

Upon completion of any service or repairs to

this product, ask the service technician to

perform safety checks to determine that the

product is in proper operating condition.

21. Do not leave thermal-paper

documents or easily deformed

items on top of the unit or near the

air exhaust for long periods of

time.

The heat from the unit could erase the

information on the thermal paper, or cause

deformation or warping.

22. Do not use the product in a closed

installation state.

Do not place the product in a box or in any

other closed installation state. Otherwise it

may overheat. This could result in a risk of

fire.

E-VIII

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 –240V

200 –240V

Plug

configuration Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your projector.

For maximum protection, repack the set as it was originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is

exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the

unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change

in temperature

Place and Manner of Installation

•Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction, and shorten

the life of the projector.

•Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their lives, and

darkening the screen.

•Do not use the product vertically in any upright position or slantwise in an angle of 20 degrees or more.

•Using this instrument near a TV or radio may cause interference to the images or audio sound. If this happens,

move it away from the TV or radio.

•Moving the projector from a low-temperature room to a high-temperature room may cause condensation on

the lens or internal parts in the instrument. If you continue to use it in that situation, the malfunction may result.

Ensure to wait until the condensation naturally disappears.

•In a high altitude location where air is thin, cooling efficiency is reduced so use it with the ambient temperature

being lowered.

E-IX

IMPORTANT PRECAUTIONS (Continued)

EXEMPTION CLAUSES

•Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as

earthquakes, lightning, etc., fire not liable to Toshiba Corporation, operation, theft or mischief by third parties,

other accidents, or use under abnormal conditions including erroneous or improper operation and other

problems.

•Toshiba Corporation bears no responsibility for incidental damages (lost profit, work interruption, corruption or

loss of the memory contents, etc.) arising from the use of or the inability to use this unit.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the

descriptions in this Instruction Manual.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from

combination with equipment or software that is not related to Toshiba Corporation.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products

touching the unit for a long time. They will leave marks on the finish.

If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your projector.

Model No. Serial No.

Retain this information for future reference.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Toshiba

Toshiba

Toshiba TDP-TW420 Manual de usuario

Toshiba

Toshiba TLP-S10U - SVGA LCD Projector Manual de usuario

Toshiba

Toshiba TDP-ET20U Manual de usuario

Toshiba

Toshiba TLP X2500 Manual de usuario

Toshiba

Toshiba TDP-ET20 Manual de usuario

Toshiba

Toshiba TDP-S81 Manual de usuario

Toshiba

Toshiba TLP-X10U Manual de usuario

Toshiba

Toshiba TLP-250 Manual de usuario

Toshiba

Toshiba TDP B1 Manual de usuario

Toshiba

Toshiba TDP-P75 Manual de usuario

Toshiba

Toshiba TLP-X4500U Manual de usuario

Toshiba

Toshiba TDP-XP1 Manual de usuario

Toshiba

Toshiba TLP-510U Manual de usuario

Toshiba

Toshiba TLP-T50 Manual de usuario

Toshiba

Toshiba C1770 Manual de uso y mantenimiento

Toshiba

Toshiba TDP-P7 Manual de usuario

Toshiba

Toshiba XE30U - TLP XGA LCD Projector Manual de usuario

Toshiba

Toshiba TLP-X150 Manual de usuario

Toshiba

Toshiba TDP-TW90 Manual de usuario

Toshiba

Toshiba TLP-511U Manual de usuario

Toshiba

Toshiba TDP MT700 Manual de usuario

Toshiba

Toshiba TLP450E Manual de usuario

Toshiba

Toshiba TLP-XC2500U Instrucciones de instalación

Toshiba

Toshiba TLP-XD2000 - XGA LCD Projector Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario