Toshiba 37HLC56 - 37" LCD Flat Panel Display Manual de usuario

SERVICE MANUAL

LCD Color Television

37HLC56 Ver. 1.01

This model is classified as a green product

(*1), as indicated by the underlined serial number.

This Service Manual describes replacement parts for the green product. When repairing this

green product, use the part(s) described in this manual and lead free solder (*2).

For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENT and LEAD-FREE

SOLDER.

Стр

из

10.05.2015

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.628\37H

...

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for

recycling and reuse of Waste Electrical and Electronic Equipment and for the Restriction of

the use of certain Hazardous Su stances. From July 1, 2006, the RoHS Directive will

prohi it any marketing of new products containing the restricted su stances.

Increasing attention is given to issues related to the glo al environmental. Toshi a

Corporation recognizes environmental protection as a key management tasks, and is doing its

utmost to enhance and improve the quality and scope of its environmental activities. In line

with this, Toshi a proactively promotes Green Procurement, and seeks to purchase and use

products, parts and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used

in manufacture must also e used as replacement parts.

Стр

из

10.05.2015

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.088\37H

...

LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the

consumer products industry at large to be environmentally responsible. Lead-

free solder must

be used in the servicing and repair of this product.

The melting temperature of lead-free solder is higher than that of leaded solder by 86ºF to

1 4ºF (3 ºC to 4 ºC). Use of a soldering iron designed for lead-based solders to repair

product made with lead-

free solder may result in damage to the component and or PCB being

soldered. Great care should be made to ensure high-quality soldering when servicing this

product especially when soldering large components, through-hole pins, and on PCBs as the

level of heat required to melt lead-free solder is high.

WARNING: This product is manufactured usin lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT!

Стр

из

1 . 5.2 15

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa .64 \37H

...

IMPORTANT NOTICE

A Known Malfunction

Autodesk® DWF™ iewer version

(Free software provided through WEB)

Use Autodesk DWF Viewer ver. 6.0.

Through WEB, ver. 6.5 has been re eased but with it, the inking function in this manua may

not work proper y.

If ver. 6.5 has been insta ed, uninsta it and reinsta ver. 6.0.

To get ver. 6.0, c ick the icon, or contact to the nearest Toshiba Service Centre for further

assistance.

Freezing windows opened

(Cannot close the open windows)

This may happen occasiona y.

In case of encountering this, fo ow the procedure be ow.

1. Press [Ctr ], [A t] and [De ete] keys at the same time to engage windows security

windows.

2. Then, choose TASK manager and App ication tab, and se ect TOSHIBA SERVICE

MANUAL-Microsoft Internet Exp orer.

3. C ick TASK-end.

Main Window back forwarded

The rea cause has not been found yet but with this condition, nothing disturbs the service

manua operation.

Стр

из

10.05.2015

fi e://C:\Documents and Settings\A exsandr\Loca Settings\Temp\Rar$EXa0.940\37H

...

Continue to use by operating the windows.

Precaution when opening the diagrams

Whi e opening the diagrams, the menu in the eft frame changes its co or to GRAY. This is

an indication that the viewer is processing.

With this condition, the menu indication co or may stick to the GRAY co or or Windows

may freeze if c icking other menu.

To avoid such things, do not operate any others whi e menu turns GRAY co or.

If entering this, re-open the service manua or refresh the eft frame.

Стр

из

10.05.2015

fi e://C:\Documents and Settings\A exsandr\Loca Settings\Temp\Rar$EXa0.940\37H

...

IMPORTANT NOTICE

User Guide

Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of

this system. Please download and install.

When Windows XP P2 is used, pop-up windows are limited by the enhanced security

function and this sample may not work. In that case, perform the Internet Explorer setting

using the following procedure to restore normal operation.

. Windows version check

[My Computer (right-click)] - [Properties]

2. Internet Explorer setting

[Tools] - [Internet Options]

Стр

из

0.05.20 5

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.248\37H

...

Operating Environment

PC : Pentium III or higher recommended

Monitor : 024 x 768 or higher resolution recommended

Стр

из

0.05.20 5

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.248\37H

...

Note:

In case of using this service manual with network connection, allocate its folder to the client

PCs as network drive to avoid any possible malfunction.

Or in case of accessing it through WEB site, the small pop-up window appears at the left

bottom corner on the screen whenever searching the location links. This is not malfunction.

Functions Provided on Each Drawing Page

Parts Information Reference Function

When the character string of a part on the drawing is clicked, its information is popped up at

the location. You can get any parts information immediately on the screen without referring

to the maintenance parts list. 

Parts earch Function

You can search any part within the displayed drawing or within the whole schematic

diagram/board view by specifying a location number. The pop-up window displayed by

clicking a part's character string allows to search the part within the applicable schematic

diagram, board view or spare parts list. 

A circle appears when the part is found, showing the part's location within the drawing. 

ignal Line/Connector Destination Display Function

When a name at the end of a signal line in a divided schematic diagram is clicked, the

destination of the signal is searched and the display changes to the destination. Connecter

destinations can also be searched in the same way. 

When two or more search results are provided, their drawing names are displayed, allowing

you to choose a desired drawing to display. 

Mouse : A mouse with wheel recommended

OS : Microsoft Windows 2000/XP

Browser : Microsoft Internet Explorer 6.0 or later

Drawing viewer : Autodesk DWF Viewer 6.0

* Use the software following respective license terms and conditions.

Стр

из

0.05.20 5

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.248\37H

...

Layer Display Changing Function

When any of the color buttons on the toolbar is clicked, it can be selected to display desired

layer in its color or not to display each layer. This allows you to see the pattern layer only by

setting other layers to "non-display". 

PC Board View Pattern Highlighting Function

When a pattern on a board view is clicked, it is highlighted in green. This allows easy pattern

tracing. 

pecified Area Printing Function

The Autodesk DWF Viewer enables to print the displayed drawing region as it is on a

printer. It also allows to print a large-sized drawing in multiple pieces (tile printing). 

Стр

из

0.05.20 5

file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.248\37H

...

IMPORTANT NOTICE

WARNING:

You are requested that you shall not modify or alter the information or data

rovided herein without rior written consent by Toshiba. Toshiba shall not

be liable to anybody for any damages, losses, ex enses or costs, if any,

incurred in connection with or as a result of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS"

WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED

WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Toshiba shall not be liable for any damages, losses, ex enses or costs, if

any, incurred in connection with or as a result of use of any information or

data rovided herein.

Стр

из

10.05.2015

file://C:\Documents and Settings\ lexsandr\Local Settings\Temp\Rar$EXa0.663\37H

...

Otros manuales para 37HLC56 - 37" LCD Flat Panel Display

Tabla de contenidos

Otros manuales de Televisor LCD de Toshiba

Toshiba

Toshiba 22C100U Manual de usuario

Toshiba

Toshiba 42TL515U Manual de usuario

Toshiba

Toshiba 37WL56P Guía de instalación

Toshiba

Toshiba 19EL833G Manual de usuario

Toshiba

Toshiba 22DV501B Manual de usuario

Toshiba

Toshiba TheaterWide 32HL95 Manual de usuario

Toshiba

Toshiba 42WL58A Manual de usuario

Toshiba

Toshiba 24L1863DB Manual de usuario

Toshiba

Toshiba 32E200U Manual de usuario

Toshiba

Toshiba TheaterWide 32HL95 Manual de usuario

Toshiba

Toshiba 40G30U Manual de usuario

Toshiba

Toshiba 40UX600U Manual de usuario

Toshiba

Toshiba 32L6353RK Manual de usuario

Toshiba

Toshiba RL83* Digital Series Manual de usuario

Toshiba

Toshiba 22EL834G Manual de usuario

Toshiba

Toshiba 32UL863R Manual de usuario

Toshiba

Toshiba 32E20U Manual de usuario

Toshiba

Toshiba 19AV71*B DIGITAL Series Manual de usuario

Toshiba

Toshiba 24D153*DB Manual de usuario

Toshiba

Toshiba 32L310U20 Manual de usuario

Toshiba

Toshiba 40RV52U Manual de usuario

Toshiba

Toshiba 52LX177 - 52" LCD TV Manual de usuario

Toshiba

Toshiba 19SL410U Manual de usuario

Toshiba

Toshiba 32AV505D Manual de usuario

Manuales populares de Televisor LCD de otras marcas

LG 32LC4R* Manual de usuario

ViewSonic

ViewSonic N4200w-1 VS10945-1M Manual de usuario

Salora

Salora 22LED1600 Manual de usuario

Samsung

Samsung LA32E420 Guía

Dell

Dell W1900 19 Instrucciones de uso

Samsung

Samsung LN40C670M1F Manual de usuario

Samsung

Samsung Series 4+ Manual de usuario

Samsung

Samsung 5 Series Manual de usuario

Grundig

Grundig 40 VLE 8230 BP Manual de usuario

Philips

Philips 43PFL4901/F7 Manual de usuario

Sony

Sony Bravia XBR-43X830C Manual de usuario

LG 32LS350 Manual de usuario

VIORE

VIORE LED32VF60 Manual de usuario

JVC

JVC LT-32A220 Manual de usuario

Philips

Philips 20TA1000/93 Manual de usuario

Philips

Philips 32PFL3158T/12 Manual de usuario

Sony

Sony Bravia KDL-V32XBR2 Manual de usuario

Vizio

Vizio VP422HDTV10A - 42" Plasma TV Manual de usuario