10
CITYSURFER
a
c
b
d
a
bc
d
User Manual
Verify that the box where the Citysurfer is delivered contains the following
elements:
Citysurfer bicycle folded.
Pedals installed in the bicycle.
Bicycle saddle with quick release system (both of them loose).
Charger with its power cord.
Lock keys for the battery (2 units).
A battery placed inside the frame.
Due to the fact that we assemble the bike in our Vidreres’ factory, we test
the proper operation one by one. However, we want to ask you to check
again some components and t them to your necessities and tastes:
TYRES PRESSURE
A pressure between 3,8 and 4,5 BAR (kgf/cm2) is recommended. The
correct pressure will increase the range. The pressure of an electric bicycle
is always higher than in a normal bicycle.
BRAKES
Check that the front and rear brakes work, actuating on the left and right
levers of the handlebar while moving slightly your e-bike. If the brake lever
has too much travel, you can adjust the tension of the brake cable by
applying torque and counter-torque to the nuts situated in the levers.
ADJUST THE HEIGHT OF THE SADDLE AND HANDLEBAR
Adjust the Citysurfer to your height to achieve a comfortable handling and
riding by regulating the height of the saddle and the handlebar with the
quick release systems marked in the images.
Recommendation: The height of the saddle should be lined up with your
hip.
HOW TO ADJUST THE FORK
You can adjust the preload of the fork to adapt it to your weight and
preferences. To increase the preload, turn clockwise the wheel situated in
the right bar of the fork. To reduce it, the wheel must be turned anticlockwise.
BEFORE USING IT
