Toro OSMAC G3 Manual de usuario

OSMAC®G3 Satellite

User’s Guide

The OSMAC®G3 offers intuitive faceplate capabilities,

superior diagnostics and can be installed as a

complete satellite or as a retrofit faceplate upgrade

for existing E-OSMAC®satellites.

• 16 to 64 stations in 8-station increments

• Field programmable for future upgrades

• Operates as a stand-alone controller or

under the management of a central computer

• Supports radio communications with the

central computer

• 12 irrigation programs

• Independent stand-alone and central operation

• Multi-Manual, Program Start and Syringe manual

operations

• Operates up to 16 stations simultaneously

Table of Contents

Introduction -----------------------------------------------------1

Home Screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1

Menu Navigation --------------------------------------------------1

Modes of Operation ------------------------------------------------2

Setting the Clock and Mode

Clock Set -------------------------------------------------2

Clock Mode ---------------------------------------------- 2–3

Setting the Date and Mode

Date -----------------------------------------------------3

Date Mode ------------------------------------------------3

Setting Scheduled Watering ------------------------------------------4

Setting OSMAC G3 for Radio Communications

Satellite Address --------------------------------------------6

Satellite Radio Frequency ---------------------------------------6

Settings Menu

Station Settings ---------------------------------------------7

Comm Mode -----------------------------------------------8

Reset Prg’s ------------------------------------------------8

Reset Sta’s ------------------------------------------------9

Reset Unit -------------------------------------------------9

Enable Sta’s -----------------------------------------------9

Clock Set ------------------------------------------------10

Clock Mode -----------------------------------------------10

Date Mode -----------------------------------------------10

Date ----------------------------------------------------11

Sat Address ----------------------------------------------11

Max Sim Sta -----------------------------------------------11

Display Adj -----------------------------------------------12

Radio Settings ---------------------------------------------12

Manual Watering

M-Manual ------------------------------------------------14

Programs ------------------------------------------------14

Syringe --------------------------------------------------15

Communication

Page Monitor ----------------------------------------------15

Page History ----------------------------------------------15

Radio Menu -----------------------------------------------15

Sat Address ----------------------------------------------15

Comm Mode ----------------------------------------------16

What’s Running --------------------------------------------------16

Diagnostics

Revision -------------------------------------------------16

Event Codes ----------------------------------------------16

VA Monitor -----------------------------------------------16

Station Test -----------------------------------------------16

Seq Stations ----------------------------------------------17

Specifications ---------------------------------------------------17

Electronic Compatibility --------------------------------------Back Cover

Introduction

The Toro®OSMAC®G3 Satellite combines modular flexibility, ease of use and increased programmability in a

single controller.

Modularity means flexibility. The OSMAC G3 is available from 16 to 64 stations, and can expand in 8-station

increments to meet your needs. Optional station switch capability and surge protection provide simple operation

and added security.

The intuitive OSMAC G3 user interface is easy to use and includes a back light for improved visibility in low-light

conditions, yet it is completely viewable in direct sunlight. The faceplate’s simple navigation arrows and Select

button allows for easy navigation and faster menu selection.

With 12 irrigation programs, the OSMAC G3 satellite allows programming to the station level. Discrete local and

central modes make stand-alone and central controlled operations independent from one another, while the ability

to run up to 16 stations simultaneously lets you irrigate a wide variety of landscapes.

Home Screen

Press any button, except the left arrow, to access the menus and settings from the home screen.

11:30am Central

04/20/16 Wed Page Mode

OSMAC G3 Address: 001

7540, 10:17:54

Current Time Satellite Operating Mode

Watering Operation Indicator

Satellite is Ready to Receive Page

Satellite Address

Current Date

Last Received Page

Menu Navigation

SELECT

SELECT Select button – Press the Select button to select a menu or change a setting or value. When a setting or

value is selected, the cursor changes to a dark background and the setting or value can be changed by using the

UP and DOWN buttons. Pressing the Select button again will return the UP and DOWN buttons to navigation

mode.

UP and DOWN button – In navigation mode, the UP and DOWN buttons navigate up and down

though the menu selections. In the edit mode, they change settings and values. Use the Select button to change

between navigation and edit mode.

LEFT and RIGHT button – The LEFT and RIGHT buttons are used to navigate left and right in a menu.

The LEFT button is also used as a back button to return to the previous menu. If the LEFT button is pressed in

the navigation mode, the menu will return to the previous one. To get back to the home screen, keep pressing the

LEFT button in the navigation mode.

Modes of Operation

The Toro OSMAC G3 Satellite can be placed in three operating modes: Central mode, Local mode and Off mode.

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Radio Monitor Sig

Page History

Radio Menu

Sat Address: 001

Comm Mode: Central

Receive Only Radio

Central

Radio Monitor Sig

Page History

Radio Menu

Sat Address: 001

Comm Mode:

Receive Only Radio

Local

Radio Monitor Sig

Page History

Radio Menu

Sat Address: 001

Comm Mode:

Receive Only Radio

Off

Central Mode – When placed in Central mode, the OSMAC G3 satellite will wait and execute radio commands

sent by the central. The satellite will ignore all scheduled watering but will execute manual watering.

Local Mode – When placed in Local mode, the OSMAC G3 will execute scheduled watering as well as manual

watering. Radio commands will be ignored.

Off Mode – When placed in Off mode, the OSMAC G3 will not execute any watering operation whether it is

scheduled or manually initiated. Any watering operation will terminate once the satellite is placed in Off mode.

Watering operations will resume once the satellite is placed back to Central or Local mode.

Setting the Clock and Mode

Clock Set

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Clock Set: 11:15am

Clock Mode: Am/Pm

Date Mode: MMDDYY

Date: 01/01/16 Fri

Sat Address: 001

Max Sim Sta: 05

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Clock Set is selected and press Select SELECT

SELECT to edit.

Step 4 – Use the LEFT and RIGHT buttons to navigate between the HOURS and MINUTES parameters.

To edit the values, use the UP and DOWN buttons to increase or decrease the HOURS and

MINUTES.

Step 5 – Press Select SELECT

SELECT once the correct time is set.

Clock Mode

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Clock Set: 11:15am

Clock Mode: Am/Pm

Date Mode: MMDDYY

Date: 01/01/16 Fri

Sat Address: 001

Max Sim Sta: 05

Am/Pm

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Clock Mode is selected and press Select SELECT

SELECT to edit.

Step 4 – Use the UP and DOWN buttons to select between Am/Pm (12-Hour format) or 24 Hrs

(International format).

Step 5 – Press Select SELECT

SELECT once the correct format is selected.

Setting the Date and Mode

Date

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Clock Set: 11:15am

Clock Mode: Am/Pm

Date Mode: MMDDYY

Date: 01/01/16 Fri

Sat Address: 001

Max Sim Sta: 05

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Date is selected and press Select SELECT

SELECT to edit.

Step 4 – Use the LEFT and RIGHT buttons to navigate between the DAY, MONTH and YEAR.

To edit the values, use the UP and DOWN buttons to increase or decrease until the correct

DAY, MONTH and YEAR is displayed.

Step 5 – Press Select SELECT

SELECT once the correct date is set.

Date Mode

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Clock Set: 11:15am

Clock Mode: Am/Pm

Date Mode: MMDDYY

Date: 01/01/16 Fri

Sat Address: 001

Max Sim Sta: 05

MMDDYY

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Date Mode is selected and press Select SELECT

SELECT to edit.

Step 4 – Use the UP and DOWN buttons to select between MMDDYY (Month/Day/Year) or DDMMYY

(Day/Month/Year) format.

Step 5 – Press Select SELECT

SELECT once the correct format is selected.

Setting Scheduled Watering

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

set>:

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

Note: In order to run Scheduled Watering, you must set the OSMAC G3 controller to Local mode operation.

See Comm Mode under Settings Menu section.

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Scheduled Watering is selected and press Select SELECT

SELECT .

Step 3 – Use the UP, DOWN, LEFT and RIGHT arrows to navigate between the parameters.

P01 - Program Designation

Select the Program you want to edit by selecting P01 and pressing the Select button SELECT

SELECT . Use the UP

and DOWN arrows to increase or decrease the program number. The OSMAC G3 controller

will allow you to program up to 12 independent schedules. Press Select SELECT

SELECT to make the selection.

100% - Watering Percentage

Adjust the Schedule’s watering percentage by selecting 100% and pressing the Select button SELECT

SELECT . Use

the UP and DOWN arrows to increase or decrease the watering percentage. Watering can

be increased up to 250% of the scheduled watering time or decreased down to 10% of the scheduled

watering time. Press Select SELECT

SELECT to finalize the change.

Days / Water Every - Assigned Active Watering Days

Select the watering interval by selecting Days and pressing the Select button SELECT

SELECT . You can select

between Days or Water Every option.

Selecting Days option allows you to select a unique 2-week watering combination. Press DOWN

until set>: option is selected and press Select SELECT

SELECT . Scroll through the selection using the UP and

DOWN arrows.

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

WEnd:

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

WDay:

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

Alt1:

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

All:

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

None - disable all days for watering.

WEnd - Selects only Saturdays and Sundays for watering while weekdays are non-watering days.

WDay - Selects Monday through Friday for watering and weekends are non-watering days.

Alt1 - Selects every other day as active watering days starting with Sunday.

Alt2 - Selects every other day as active watering days starting with Monday.

All - Selects everyday as watering days.

set> - Allows you to activate and deactivate any of the days within the 2-week schedule. Use the LEFT

and RIGHT arrows to navigate through the individual days and use the UP and DOWN

arrows to activate (solid box) or deactivate (empty box).

Press Select SELECT

SELECT to finalize the change.

Selecting Water Every option allows you to adjust how many interval days between scheduled watering.

It also gives you the flexibility to set the position of the current day within the watering interval.

Example: Set watering to every 3 days with the current day being the 2nd day (water the next day).

P01 100% 00:00:00

Water Every: 03 Days

Today’s Day: 01

Start : 01 05:00am

Sta#: 01–05 05 min

Simult : 06

Start - Scheduled Start Times

The OSMAC G3 allows you to set up to 24 start times. Select the Start: to set or edit the start time and

press the Select button SELECT

SELECT . Use the UP and DOWN arrows to select the start time number

you want to edit and press the Select button SELECT

SELECT . Use the LEFT and RIGHT arrows to

navigate between Minutes and Hours. Use the UP and DOWN arrows to adjust the minutes

and hours. Press Select SELECT

SELECT when the desired start time is set. Repeat the Start procedure to add

additional start times.

Sta# - Assigned Station(s) and Runtime(s)

Set the stations you want to activate during the schedule by selecting Sta# and pressing the Select

button SELECT

SELECT . Use the UP and DOWN arrows to select the station you want to activate, then

use the LEFT and RIGHT arrows to navigate to the runtime. Use the UP and DOWN

arrows to set the desired runtime for that station.

Example: Activate station 1 with 5-minute runtime.

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

set>:

Start : 01 05:00am

Sta#: 01–01 05 min

Simult : 06 05

If sequential stations will be running the same amount of runtime in the schedule, you can easily

accomplish this by setting the 1st station in the sequence followed by the last station in the sequence

and setting the runtime that each station will run.

Example: Activate stations 1 through 5 with 10-minute runtime per station.

P01 100% 00:00:00

Days: SMTWTFSSMTWTFS

set>:

Start : 01 05:00am

Sta#: 01–05 10 min

Simult : 06 10

Repeat the Sta# procedure to set additional stations and runtimes. Press Select SELECT

SELECT when all the

desired stations and runtimes are set.

Simult - Assigned the Maximum Number of Simultaneously Active Stations

Set the maximum number of stations that can simultaneously be activated. The OSMAC G3 controller

will allow you to set a maximum of 16 total stations that can run simultaneously. However, there may be

cases where less stations can be simultaneously activated.

Set the maximum number of simultaneously active stations by selecting Simult: and pressing the Select

button SELECT

SELECT . Use the UP and DOWN arrows to set the maximum number of station you want

to activate simultaneously, then press the Select SELECT

SELECT button to accept.

Step 4 – Repeat Setting Scheduled Watering procedure for setting additional programs.

Setting OSMAC G3 for Radio Communications

In order to send page commands to the OSMAC G3 controller, you must set and coordinate the satellite address

and the transmitting and receiving frequency with the radio system being used.

Satellite Address - Satellite address is the identification that is given to a particular satellite. In order to

communicate with individual satellites, each satellite is given a unique satellite address. When a page is sent

to that satellite address, only the intended satellite will respond and the other satellites will ignore the page

command.

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Radio Monitor Sig

Page History

Radio Menu

Sat Address: 001

Comm Mode: Central

Receive Only Radio

001

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Communication is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Sat Address is selected and press Select SELECT

SELECT .

Step 4 – Use the UP and DOWN arrows to select the satellite address you want to set.

Step 5 – Press Select SELECT

SELECT to finalize.

Satellite Radio Frequency - The OSMAC G3 radio is preprogrammed with 6 radio frequencies that are frequently

used in Toro irrigation systems. In cases where these preprogrammed frequencies are not suitable or available for

use in your area, each of the frequencies can be edited to the desired frequency.

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Radio Monitor Sig

Page History

Radio Menu

Sat Address: 001

Comm Mode: Central

Receive Only Radio

Radio Frequency

Radio Information

Log All Sat: No

RSSI Enable: Yes

Reset Radio Defaults

Channel: 1

Rx Freq1 462.2125MHz

Tx Freq1 462.2125MHz

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Communication is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Radio Menu is selected and press Select SELECT

SELECT .

Step 4 – While Radio Frequency is selected, press Select SELECT

SELECT .

Step 5 – While Channel is selected, press Select SELECT

SELECT .

Step 6 – Use the UP and DOWN arrows to scroll through the frequency channel selections.

Step 7 – Press Select SELECT

SELECT once the proper frequency channel is selected.

Step 8 – If the 6 preprogrammed frequencies are not suitable for your use, you can edit any of the frequency

channels. Follow steps 5-7 to select the frequency channel you want to edit. Use the UP and DOWN

arrows to select Rx (Receive) frequency, then press Select SELECT

SELECT .

Step 9 – Use the UP and DOWN arrows to modify the values and use the LEFT and RIGHT

arrows to navigate between values. Press Select SELECT

SELECT once the correct frequency value is set.

Repeat steps 8 and 9 for Tx (Transmit) frequency. Rx and Tx frequency should match for proper

operation.

Settings Menu

Station Settings

Station Settings allows you to configure each station as an irrigation station or a switch. When a station is

configured as a switch, that station is not affected by the rain delay function. When a switch is activated, it does

not activate the pump terminal.

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – While Station Settings is selected and press Select SELECT

SELECT .

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Station Settings

Comm Mode: Central

Reset Pgr’s: No

Reset Sta’s: No

Reset Unit: No

Enable Sta’s: No

S01 - Select which station you want to edit. While S01 is selected, press Select SELECT

SELECT . Use the UP and DOWN

arrows to select the station number you want to edit. Press Select SELECT

SELECT when the correct station

number is displayed.

S01

Disable: No

Is Switch: No

Sched Today None

Water Today None

Water yestr None

S01

Disable - Use this function when you need to disable a station from activation indefinitely. Once disabled,

the station will not activate for all scheduled and manual watering. Watering activity will only resume once the

station’s Disable function is set back to No. Use the UP and DOWN arrows to select Disable and press

Select SELECT

SELECT . Use the UP and DOWN arrows to select Yes or No. Press Select SELECT

SELECT when the correct

selection is set.

S01

Disable: No

Is Switch: No

Sched Today None

Water Today None

Water yestr None

Yes

Is Switch - Set the station to switch when using it to activate a relay or any devices other than the irrigation

system. When the station is set to switch, it is not affected by the rain delay function. The pump terminal will also

not activate when the switch is activated. Use the UP and DOWN arrows to select Is Switch and press

Select SELECT

SELECT . Use the UP and DOWN arrows to select Yes or No. Press Select SELECT

SELECT when the correct

selection is set.

Sched Today - Schedule today will indicate if the station is set to a schedule that will irrigate today. This is a

monitor only parameter and can not be modified.

Water Today - Water today will indicate if the station was activated today. This is a monitor only parameter and

can not be modified.

Water Ystr - Water yesterday will indicate if the station performed watering the day before. This is a monitor only

parameter and can not be modified.

Comm Mode

What’s Running

Manual Watering

Scheduled Watering

Communication

Diagnostics

Settings

Station Settings

Comm Mode:

Reset Pgr’s: No

Reset Sta’s: No

Reset Unit: No

Enable Sta’s: No

Central

Station Settings

Comm Mode:

Reset Pgr’s: No

Reset Sta’s: No

Reset Unit: No

Enable Sta’s: No

Local

Station Settings

Comm Mode:

Reset Pgr’s: No

Reset Sta’s: No

Reset Unit: No

Enable Sta’s: No

Off

Central Mode – When placed in Central mode, the OSMAC G3 satellite will wait and execute radio commands

sent by the Central mode. The satellite will ignore all scheduled watering but will execute manual watering.

Local Mode – When placed in Local mode, the OSMAC G3 will execute scheduled watering as well as manual

watering. Radio commands will be ignored.

Off Mode – When placed in Off mode, the OSMAC G3 will not execute any watering operation whether it is

scheduled or manually initiated. Any watering operation will terminate once the satellite is placed in Off mode.

Watering operations will resume once the satellite is placed back to Central or Local mode.

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Comm Mode is selected and press Select SELECT

SELECT .

Step 4 – Use the UP and DOWN arrows to select between Central, Local and Off modes.

Step 5 – Press Select SELECT

SELECT when the proper mode of operation is set.

Reset Prg’s

Station Settings

Comm Mode: Central

Reset Pgr’s: No

Reset Sta’s: No

Reset Unit: No

Enable Sta’s: No

Yes

Selecting Yes to this menu will erase all scheduled programs and reset all their parameters to 100% watering

adjustment, everyday watering, no start time, no set station, and one simultaneous station only.

Step 1 – While at the Home display, press Select SELECT

SELECT to access the controller menu.

Step 2 – Press DOWN until Settings is selected and press Select SELECT

SELECT .

Step 3 – Press DOWN until Reset Prg’s is selected and press Select SELECT

SELECT .

Step 4 – Use the UP and DOWN arrows to select Yes.

Step 5 – Press Select SELECT

SELECT when finished.

Tabla de contenidos

Manuales populares de Radar marino de otras marcas

Furuno

Furuno 1751 MARK-2 Manual de usuario

RADAC

RADAC WaveGuide 5 Onboard 2 Manual de usuario

JRC

JRC JMA-9922-6XA Manual de usuario

Furuno

Furuno 1931 MARK-2 Manual de usuario

JRC

JRC JMR-9230-S Manual de usuario

Koden

Koden MDC-1810P Manual de usuario

Furuno

Furuno FR-2010 Manual de usuario

Furuno

Furuno FAR-3210 Manual de usuario

Koden

Koden MDC-7006 Manual de usuario

Furuno

Furuno 1751 Manual de usuario

Furuno

Furuno FCR-902 Manual de usuario

Koden

Koden MDC-2240 Manual de usuario

Garmin

Garmin GMR 18 XHD Manual de usuario

Furuno

Furuno FCR-2139S-BB Manual de usuario

Koden

Koden MDC-2000 series Manual de usuario

Garmin

Garmin GMR 40 Instrucciones de funcionamiento

JRC

JRC JMA-5212-4 Manual de usuario

Simrad

Simrad R5000 Manual de usuario