Toro 22290 Manual de referencia

LANDSCAPE CONTRACTOR BUSINESS

HEAVY DUTY WALK ROTARIES #50

January 28, 2014

New 21” Heavy Duty - Setup

PRODUCT: 2014 Heavy Duty 21” Recycler®/Rear Bagger Lawn Mower

UNITS AFFECTED: Model Number(s): Serial Number(s):

22290 314000001 –314999999

22291 (International) 314000001 –314999999

22293 (International) 314000001 –314999999

22295 314000001 –314999999

22296 314000001 –314999999

22297 314000001 –314999999

22298 314000001 –314999999

SITUATION: The mowers listed above are significantly different from last year’s

machines and require a few new steps in the setup process that we

would like to call to your attention.

Cable routing

When assembling the handle to the mower, be sure the cables are

routed to the outside of the lower handle mounts. Once the handle is

mounted, place the cable guard(s) around the cables and attach the

guard(s) to the handle.

- OVER -

Routing

Svc Mgr

Tech 1

Tech 2

Tech 3

Tech 4

Tech 5

Parts Mgr

Sales Mgr

Warranty Mgr

Initials

SERVICE BULLETIN

LANDSCAPE CONTRACTOR BUSINESS

HEAVY DUTY WALK ROTARIES #50 (January 28, 2014)

Page 2

SITUATION (Cont.): Adjusting the self-propel

For proper operation and long term transmission life it is important

that the correct adjustment procedure is followed. Under tightening

the cable will result in a lack of drive force. Over tightening the

cable will make the bail hard to pull up to the handle, could lead

to internal transmission damage, and shorten transmission life.

When the machine is boxed, the self-propel cable is adjusted loose

so the belt will not be in tension. Adjusting the self-propel is the final

step in the setup instructions in the Operator’s Manual. For your

convenience we have attached a copy of these instructions.

WARRANTY: Information only. Warranty does not apply.

LANDSCAPE CONTRACTOR BUSINESS

HEAVY DUTY WALK ROTARIES #50 (January 28, 2014)

Page 3

2014 Toro Heavy Duty WPM –Cable Adjustment

Adjusting the Self-propel Drive

If the machine is new, does not self-propel, or it tends to creep forward, adjust the drive cable.

1. Move the machine outside and onto a paved surface near a solid wall to safely prevent the machine

from moving forward while the engine is running.

2. Position the machine with the front tires against the wall.

Note: Ensure that the area is well ventilated and clear of debris that could be thrown by the

machine.

3. Shift the transmission to third gear (machines with 3-speed transmissions only).

4. Start the engine; refer to Starting the Engine (in the Operators Manual).

5. Pull the self-propel-drive bar to the handle.

Note: The wheels should start to turn as the self-propel-drive bar just touches the handle.

6. Shut off the engine.

7. If you must adjust the machine, do the following:

• If the wheels do not spin when you engage the self-propel-drive bar, the traction belt is too

loose. Rotate the wheel-drive-control knob (Figure 1) clockwise 1 turn and repeat steps 4

through 6.

• If the wheels spin before you fully engage the self-propel-drive bar, the traction belt is too tight.

Rotate the wheel-drive-control knob (Figure 1) counterclockwise 1 turn and repeat steps 4

through 6.

8. For a new traction belt, rotate the drive cable adjustment knob clockwise 1 additional turn to allow

for the normal stretching of the belt during the break-in period.

Note: You can skip this step if you are adjusting a used belt.

Figure 1

1. Wheel-drive-control knob

Otros manuales para 22290

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cortacésped de Toro

Toro

Toro 22188TE Manual de usuario

Toro

Toro 20955 Manual de usuario

Toro

Toro Recycler 147-8696 Manual de usuario

Toro

Toro 74402 Manual de usuario

Toro

Toro Recycler 145-1538 Manual de usuario

Toro

Toro Groundsmaster 4000 Manual de usuario

Toro

Toro Groundsmaster 1200 Series Manual de usuario

Toro

Toro 4530 Manual de usuario

Toro

Toro GreensPro 1200 Manual de usuario

Toro

Toro 74625 Manual de usuario

Toro

Toro 30682 Manual de usuario

Toro

Toro Super Recycler 20057 Manual de usuario

Toro

Toro 74352 Manual de usuario

Toro

Toro Z Master Professional 7000Series 74264TE Manual de usuario

Toro

Toro Grandstand 78525 Manual de usuario

Toro

Toro GrandStand 18850TE Manual de usuario

Toro

Toro 30241 Groundsmaster 228-D Manual de usuario

Toro

Toro Recycler 20333C Manual de usuario

Toro

Toro 30373 Manual de usuario

Toro

Toro 13AX91RS848 Manual de usuario

Toro

Toro Recycler 20073 Manual de usuario

Toro

Toro Super Recycler 20837 Manual de usuario

Toro

Toro Z Master 8000 Series Manual de usuario

Toro

Toro 31222 Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Stihl

Stihl RMA 443 PV Manual de usuario

Yard-Man

Yard-Man 3700-0 Manual de usuario