Instruction Manual - EvoDECO 10/10 & 10/8
298061_en - 07/12
TABLE OF CONTENTS
1 Installation conditions.............................................................................. 1-1
1.1 Machine identification....................................................................................1-1
1.2 Machine dimensions.......................................................................................1-2
1.2.1 Dimension specifications....................................................................................... 1-2
1.2.1.1 Dimensions EvoDECO 10/10 & 10/8 ................................................................................1-2
1.2.1.2 Dimensions EvoDECO 10/10 & 10/8 with bar feeder SBF 216 EVO...............................1-3
1.3 Safety clearance.............................................................................................1-4
1.3.1 Chip tank................................................................................................................. 1-4
1.4 Conditions of use.............................................................................................1-5
1.4.1 Respecting the environment ................................................................................. 1-5
1.4.2 Quality of the floor.................................................................................................. 1-5
1.4.3 Operating environment.......................................................................................... 1-6
1.4.3.1 Temperature and ambient humidity...............................................................................1-6
1.4.3.2 Noise ..................................................................................................................................1-6
1.4.4 Air extraction specifications.................................................................................. 1-7
1.4.4.1 Minimum room volume....................................................................................................1-7
1.4.4.2 Ventilation of premises.....................................................................................................1-7
1.4.4.3 Oil spray and fume extraction.........................................................................................1-8
1.5 Energy supply connection specifications...................................................1-10
1.5.1 Electrical connection........................................................................................... 1-10
1.5.2 Pneumatic connection......................................................................................... 1-10
1.6 Guard opening/closing................................................................................1-11
1.7 Machine connection to the barfeeder .......................................................1-12
1.7.1 Description ............................................................................................................ 1-12
1.7.2 Necessary specifications..................................................................................... 1-12
1.7.3 Capacity and length of the remnant.................................................................. 1-14
1.7.4 Length of the remnant and part for SBF 216....................................................... 1-14
2 Installation................................................................................................. 2-1
2.1 Work environment (specific to the installation) ...........................................2-2
2.1.1 Order and cleanliness............................................................................................ 2-2
2.2 Unpacking........................................................................................................2-4
2.2.1 Removal of the transport flanges.......................................................................... 2-4
2.3 Installation........................................................................................................2-4
2.4 Cleaning...........................................................................................................2-4
2.5 Alignment of the bolt-making machine / bar feeder .................................2-4
2.6 Connecting the energy supplies ...................................................................2-5
2.6.1 Electrical connection ............................................................................................. 2-5
2.6.1.1 Connection to the local mains........................................................................................2-6
2.6.1.2 Connection via an autotransformer................................................................................2-7
2.6.2 Pneumatic connection........................................................................................... 2-8
2.7 Topping up liquids...........................................................................................2-9
2.7.1 Glycerine tank ........................................................................................................ 2-9
2.8 Topping up liquids.........................................................................................2-10
2.8.1 Cutting liquid tank ................................................................................................ 2-10
2.8.2 Centralised lubrication reservoir......................................................................... 2-11
2.8.3 Spindle coolant circuit reservoir ......................................................................... 2-12
