■Before operate the product
1. Before using our products, please read this manual carefully to understand the
proper use of your unit.
2. Never operate a chain saw when you are fatigued, ill, or upset, or under the
influence of medication that may make you drowsy, or if you are under the influence
of alcohol or drugs.
3. Operate the chain saw only in well ventilated areas. Never start or run the engine
inside a closed room or building. Exhaust fumes contain dangerous carbon
monoxide.
4. Never cut in high wind, bad weather, when visibility is poor or in very high or low
temperatures. Always check the tree for dead branches which could fall during the
felling operation.
5. Use safety and slip-resistant footwear, snug fitting clothing and eye, hearing and
head protection devices. Use the anti-vibration(AV) glove.
It is believed that a condition called Raynaud’s phenomenon, which affects the fingers
of certain individuals may be brought about by exposure to vibration and cold. Loss of
color and numbness in the fingers. The following precautions are strongly
recommended because the minimum exposure which might trigger the ailment is
unknown.
Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.
Maintain good blood circulation by performing vigorous arm exercises during frequent
work breaks and also by not smoking. Keep the saw chain sharp and the saw, including
the AV system, well maintained. A dull chain will increase cutting time, and pressing a
dull chain through wood will increase the vibrations transmitted to your hands. A saw
with loose components or with damaged or worn AV buffers will also tend to have
higher vibration levels. Limit the hours of operation.
All the above mentioned precautions do not guarantee that you will not sustain white
