TOPP C160 Guía

INSTALLATION AND USE INSTRUCTIONS

BEFORE INSTALLING AND USING THE ACTUATOR, IT IS

COMPULSORY FOR THE INSTALLER AND THE USER TO READ

AND UNDERSTAND THIS MANUAL IN ALL ITS PARTS.

CHAIN ACTUATOR FOR

WINDOW AUTOMATION C160

COD. 0P5296

VER.0.0 REV.07.18

original instructions

THIS MANUAL IS INTEGRAL PART OF THE ACTUATOR

AND MUST BE PRESERVED FOR FUTURE REFERENCE

UNTIL DEMOLITION OF THE SAME.

C160RWA

C160

INDICE

ISTRUZIONI PER L’INSTALLAZIONE E L’USO

C160

INDEX

INSTALLATION AND USE INSTRUCTIONS

C160

1- EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINE..pag.04

2- GENERAL REMARKS

2.1- General Instructions ..............................................................................................pag.05

2.2- Installer and user....................................................................................................pag.05

2.3- Technical assistance..............................................................................................pag.05

2.4- Reserved rights ....................................................................................................pag.05

2.5- Description of personnel .......................................................................................pag.05

3- TECHNICAL DESCRIPTION

3.1- Actuator Denomination - Dimensions - Technical data..........................................pag.06

3.2- Formulas for the calculation of thrust and tractive force........................................pag.08

3.3- Destination of use..................................................................................................pag.08

3.4- Use limits................................................................................................................pag.08

3.5- Rating plate and “CE” marking .............................................................................pag.08

3.6- Package ................................................................................................................pag.09

3.7- Components and dimensioning..............................................................................pag.11

3.8- Application..............................................................................................................pag.12

4- SAFETY

4.1- General Instructions ..............................................................................................pag.13

4.2- Safety devices ......................................................................................................pag.14

4.2.1- Protection against electric hazard ......................................................................pag.14

4.3- Safety plates..........................................................................................................pag.14

4.4- Residual risks ........................................................................................................pag.14

5- INSTALLATION

5.1- General Instructions...............................................................................................pag.15

5.2- Installation .............................................................................................................pag.15

5.3- Electric connections...............................................................................................pag.15

5.4- Command devices.................................................................................................pag.15

5.5- Correct assembly of the actuator on the window frame.........................................pag.16

5.6- Emergency procedures..........................................................................................pag.17

6- USE AND OPERATION

6.1- Use of the actuator ................................................................................................pag.18

7- MAINTENANCE

7.1- General Instructions ..............................................................................................pag.18

8- DEMOLITION

8.1- General Instructions ..............................................................................................pag.19

9- SPARE PARTS AND ACCESSORIES UPON REQUEST

9.1- General Instructions...............................................................................................pag.19

10- DRAWINGS / INSTALLATION INSTRUCTIONS

10.1- Frame actuator mounting...........................................................................pag.20

10.2- Casement actuator mounting........................................................................pag.49

11.ELECTRICAL WIRING DIAGRAM............................................................pag.54

1- EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

INSTALLATION AND USE INSTRUCTIONS

ORIGINAL

The undersigned, in the name of and

behalf of the following company

Topp S.r.l.

Via Galvani, 59

36066 Sandrigo (VI)

Italia

herewith declares that the person authorised to compile the technical ﬁle is

Name: Bettiati Roberto - Topp S.r.l.

Address: via Galvani,59 36066 Sandrigo (VI)

and that to the partly completed machinery

CHAIN ACTUATOR FOR WINDOW AUTOMATION

RWA CHAIN ACTUATOR FOR WINDOW AUTOMATION

Type: C160

Model: C160/230V - C160/24V RWA - C160/24V Double push point RWA

the following essential requisites of the

2006/42/EC Machinery Directive (including all applicable amendments)

have been applied and fulﬁlled: Enclosure I: 1.5.1; 1.5.2; 1.5.10; 1.5.11

that the relevant technical documentation is compiled in accordance with part B of Annex VII of the above

mentioned Machinery Directive..

The above identiﬁed partly completed machinery is also in conformity with the all the relevant provisions of the

following directives (including all applicable amendments)

EMC Directive 2014/30/EU

RoHS II Directive 2011/65/EU

The following harmonised standards have been applied:

EN 60335-2-103:2015 (applicable parts)

EN 55014-1:2006 + A1:2009 + A2:2011

EN 55014-2:2015

EN 61000-6-2:2005.

EN 61000-6-3:2007 + A1:2011 + AC:2012.

EN 50581:2012

EN 12101-2:2003 (only for RWA): - 7.1 Dual purpose ventilator class "RE1000" -7.2 class "SL 0" - 7.3

class"T(-15)" - 7.4 class "WL1500" - 7.5 class "B300".

and the following technical documents:

EN 62233:2008

The undersigned also undertakes the obligation, in response to a duly reasoned request by the national market

surveillance authorities, to transmit to the a.m. authorities, in electronic or paper format, the relevant technical

documentation on the partly completed machinery.

The above identiﬁed partly completed machinery must not be put into service until the ﬁnal machinery into which

it is to be incorporated has been declared in conformity with the provisions of the above mentioned Machinery

Directive.

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Date: Sandrigo01/02/2018 Signature: Matteo Cavalcante

Amministratore ................................................................

GENERAL REMARKS -2

INSTALLATION AND USE INSTRUCTIONS

C160

2.1- GENERAL INSTRUCTIONS

BEFORE INSTALLING AND USING THE ACTUATOR, IT IS COMPULSORY THAT THE INSTALLER AND THE USER

CAREFULLY READ AND UNDERSTAND THIS MANUAL IN ALL ITS PARTS.

THIS MANUAL IS INTEGRAL PART OF THE ACTUATOR AND MUST COMPULSORILY BE PRESERVED FOR FUTURE

REFERENCE.

THE MANUFACTURER HAS NO LIABILITY FOR ANY EVENTUAL DAMAGE TO PERSONS, ANIMALS AND THINGS DUE TO

THE INOBSERVANCE OF THE PRESCRIPTIONS DESCRIBED IN THIS MANUAL.

IN ORDER FOR THE AUTOMATION UNIT TO OPERATE CORRECTLY, WE RECOMMEND CARRYING OUT PERIODICAL

MAINTENANCE ON IT, AS INDICATED IN PAR. 7 OF THIS MANUAL.

THE WARRANTY ON THE ACTUATOR WILL NOT BE HONORED IF PRODUCT IS NOT INSTALLED AND USED ACCORDING TO

THE INSTRUCTIONS PROVIDED AND THE REGULATIONS SHOWN IN THIS INSTRUCTION MANUAL AND IF IT IS USED WITH

NONGENUINE PARTS, ACCESSORIES, SPARE PARTS AND/OR CONTROL/FEEDING UNITS.

2.2- INSTALLER AND USER

THE ACTUATOR INSTALLATION CAN BE PERFORMED EXCLUSIVELY BY COMPETENT AND QUALIFIED TECHNICAL

PERSONNEL SATISFYING THE PROFESSIONAL AND TECHNICAL REQUIREMENTS FORESEEN BY THE LAWS IN FORCE

IN THE COUNTRY OF INSTALLATION.

THE INSTALLATION TECHNICIAN SHALL ACCEPT FULL RESPONSIBILITY FOR ANY INSTALLATION ERRORS AND FOR

ANY FAILURE TO ADHERE TO THE INSTRUCTIONS PROVIDED IN THIS MANUAL. THE INSTALLATION TECHNICIAN

SHALL THEREFORE BE EXCLUSIVELY LIABLE FOR ANY DAMAGES CAUSED TO USERS AND/OR THIRD PARTIES THAT

MAY ARISE AS A RESULT OF INCORRECT INSTALLATION.

THE ACTUATOR CAN BE USED EXCLUSIVELY BY A USER ACTING IN COMPLIANCE WITH THE INSTRUCTIONS

CONTAINED IN THIS MANUAL AND/OR IN THE MANUAL OF THE ACTUATOR CONTROL DEVICE (E.G.: CONTROL UNIT).

2.3- TECHNICAL ASSISTANCE

Contact the installation technician or retailer for assistance.

2.4- RESERVED RIGHTS

The reserved rights on this manual "Installation and use instructions" remain property of the Manufacturer.

Each information herein contained (text, drawings, diagrams, etc.) is reserved.

None part of this manual can be reproduced and disclosed (totally or partially) by any reproduction means (photocopies,

microfilms or other) without written authorization of the Manufacturer.

2.5-DESCRIPTION OF PERSONNEL

USERS MUST NEVER PERFORM OPERATIONS RESERVED FOR MAINTENANCE PEOPLE OR SPECIALISED

TECHNICIANS. THE MANUFACTURER DECLINES ALL LIABILITY FOR DAMAGE DERIVING FROM FAILURE TO OBSERVE

THE ABOVE REQUIREMENTS.

Specialised electrician:

A specialised electrician must be able to install the actuator, start it and operate it both in normal conditions and in the

maintenance mode; he/she is qualified to perform all electrical and mechanical adjustment and maintenance operations.

He/she is allowed to work on live electrical cabinets and junction boxes.

User:

specialised person capable of operating the actuator under normal conditions by using the relative controls. He/she must

also be able to operate with the actuator under “maintenance” in order to perform simple routine maintenance operations

(cleaning), and start or reset the actuator following an unscheduled stop.

3- TECHNICAL DESCRIPTION

INSTALLATION AND USE INSTRUCTIONS

C160

3.1- DENOMINATION – DIMENSIONS

TECHNICAL DATA

C160

stroke 360

230V - 24V

C160

stroke 600

230V - 24V

385

192.8

494

202.5

634

C160

stroke 1000

24V

202.5

C160

stroke 1000

230V

H = 43 mm

W= 68.5 mm

360 600 1000

0,43 A 0,60 A 0,60 A

11 W 15 W 15 W

300 N Fig.A 50 N

200 N 200 N 200N

7,74 10 mm/s 10 mm/s

46,5 s 60s 100s

1,7 kg 1,9 kg 2,5 kg

322 562 962

Stroke ( 1) (mm)

from - 5°C to + 50°C

Electronic for o pening-by

amperometric absorption for

closing

IP30

yes

4 min

24V

Class III

Operating temperature

TECHNICAL DATA

C160 RWA 24V Single push point

Efective stroke bottom hung inward

Type o f service S (3)

Protection degree o f electric devices

Parallel electric co nnection o f mo re

actuators on the same window

Thrust force

Tractive force

Idle translatio n speed

Duration of the idle stro ke (2)

Power supply vo ltage

Absorbed current

Absorbed power with load

Protection against electric sho ck

Limit switch

Gross weight

740

307

(2) It is considered RWA if the Duration of t he idle stroke is less than or equal to 60 s

/ 600mm Equivalent stroke

(3) Service of limit ed duration according to EN 60034

(1) Tolerance on the precision of limit switch tripping at out put: +/ - 10mm

360 600 1000

0,12A 0,14A 0,14A

28W 22,5W 22,5W

300 Fig.A 50

200 200 185

8mm/s 8mm/s 8mm/s

45s 75s 125s

1,7 kg 1,9 kg 2,8 kg

322 562 962

TECHNICAL DATA

C160 230V Single push point

Power supply vo ltage

Absorbed current

Absorbed po wer with load

Protectio n against electric sho ck

Stroke ( 1) (mm)

from - 5°C to + 50°C

Electronic fo r opening-by

amperometric abso rptio n fo r

closing

IP30

yes

4 min

230V ~ 50Hz

Class II

Duration o f the idle stro ke

Efective stro ke bo tto m hung inward

Gross weight

Operating temperature

Limit switch

Type o f service S (3)

Protectio n degree of electric devices

Parallel electric co nnectio n of mo re

actuators o n the same windo w

Thrust fo rce

Tractive fo rce

Idle translatio n speed

Stroke [mm]

Thrust load actuator [N]

Fig. A

INSTALLATION AND USE INSTRUCTIONS

C160

Lt L

TECHNICAL DESCRIPTION -3

C160

Double push point

stroke 360

24V

H = 43 mm

W= 68.5 mm

Lt; L : variables

(2) It is considered RWA if the Duration of t he idle stroke is less than or equal to 60 s

/ 600mm Equivalent stroke

(3) Service of limit ed duration according to EN 60034

(1) Tolerance on the precision of limit switch tripping at out put: +/ - 10mm

Stroke ( 1) (mm )

360

24V

0,75A

18W

Class III

IP30

yes

400

300

7,5mm/s

48s

4 min

Electronic fo r o pening-by

amperometric abso rptio n

for clo sing

from - 5°C to + 50°C

3,9kg - 7,0 kg

1200<Lt<3000 2

3000<Lt<4000 3

322

Protection degree o f electric devices

Parallel electric co nnectio n of mo re

actuators o n the same windo w

TECHNICAL DATA

C160 RWA 24V Double push point

Power supply vo ltage

Absorbed current

Absorbed po wer with load

Protection against electric sho ck

Thrust force

Tractive force

Idle translatio n speed

Duration o f the idle stro ke (2)

Gross weight

Limit switch

Operating temperature

Type o f service S (3)

Number o f clamps

Efective stroke bo tto m hung inward

3.4- USE LIMITS

The actuator has been designed and manufactured exclusively for the destination of use given in par. 3.3, therefore, any

other type of use is strictly forbidden in order to assure in any moment the safety of the installer and of the user, as well as the

efficiency of the actuator itself.

Check carefully all environmental conditions (temperature, humidity, wind, snow, potential chemical agents, etc.) and

installation settings (misaligned fitting of brackets and attachment to the frame, frictions produced by hinges or gaskets, use

of selfbalancing window stays, etc.) it is recommended that they not exceed the actuator performances shown in par.3.1. If

they do, please find an alternative and more suitable product for your application.

IT IS STRICTLY FORBIDDEN TO INSTALL THE ACTUATOR ON THE EXTERNAL SIDE OF THE WINDOW FRAME SUBJECT

TO ATMOSPHERIC AGENTS (RAIN, SNOW, ETC.).

THE USE OF THE ACTUATOR IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE ATMOSPHERE IS STRICTLY

FORBIDDEN.

IT IS COMPULSORY TO KEEP THE PACKAGE AND THE ACTUATOR OUT OF REACH OF CHILDREN.

3.3- DESTINATION OF USE

The actuator has been designed and manufactured to perform, by means of a command device, the opening and closing

of top hinged windows, bottom hinged windows and side hinged windows.

Application RWA: The RWA actuator has been designed and manufactured to perform in case of emergency the opening

of the window for safe discharge of the smoke. It must be installed in windows that opening outside and bottom hinged.

According to EN 12101-2 / 2003.

3.4- FORMULAS FOR THE CALCULATION OF THRUST AND TRACTIVE FORCE

Top hung windows (A) or

bottom hung windows (B)

F= Force necessary for opening or closing

P= Weight of the window (Only movable part)

C= Window opening stroke

H= Window height (Only movable part)

F = (0,54 x P) x ( )

Fig. 1

3- TECHNICAL DESCRIPTION

INSTALLATION AND USE INSTRUCTIONS

C160

3.5- RATING PLATE AND “CE” MARKING

The “CE” marking certifies the compliance of the machine with the essential safety and health requirements foreseen by the

product European Directives.

The rating plate is an adhesive plate in polyester, silk-screen printed in black, having the following size: L=24 mm - H=60 mm

It is applied externally on the actuator. The plate bears in readable and indelible way the following data:

• logo and address of the manufacturer

• type and model

• voltage and intensity of power supply (V - A)

• absorbed electric power P (W)

• thrust and tractive force F (N)

•type of service S2 (min)

• idle translation speed (mm/s)

• protection degree (IP)

• “CE” marking

• symbol of WEEE Directive 2002/96/CE

• symbol of double insulation (only for mod. C160/230V)

• serial number

3.6- PACKAGE

Each package of the product (Fig. 2) contains:

1) Actuator equipped with power supply (Ref. A);

2) Window mounting brackets (depending on application) and screws for aluminum (Ref. B);

3) Actuator brackets (depending on application) and screws for aluminum (Ref. C);

4) Installation and use instructions (Ref.D);

5) Safety plate (Ref. E).

MAKE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN THE PACKAGE, AS WELL AS

THAT THE ACTUATOR HAS NOT BEEN DAMAGED DURING TRANSPORT.

SHOULD ANY ANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE ACTUATOR, AND IT IS

COMPULSORY TO REQUIRE TECHNICAL ASSISTANCE FROM YOUR DEALER OR THE MANUFACTURER.

THE PACKAGING (PAPER, PLASTIC, ETC.) HAS TO BE DISPOSED ACCORDING TO THE LAWS IN FORCE.

INSTALLATION AND USE INSTRUCTIONS

C160 TECHNICAL DESCRIPTION -3

3- TECHNICAL DESCRIPTION

INSTALLATION AND USE INSTRUCTIONS

C160

MACCHINA AD AVVIAMENTO AU TOMATICO

AUTOMATIC MACHINE

PRIMA DI IN STALLARE E UTILIZZARE L'ATTUATORE È OBBLIG ATORIO CHE L'INS TALLATORE E L'UTILIZZATORE

LEGGANO E COMPRENDANO IN TUTTE LE SUE PARTI IL MANUALE

THE INSTALLER AND USER MUST READ AND UNDERSTAND ALL PARTS OF TH IS MANUAL BEFORE INSTALLING AND

USING T HE ACTUATOR.

PERICOLO ATTENZIONE ALLE MANI

BEWARE OF YO UR HANDS

ATTENZIONE MACCHINA AD AVVIAM ENTO AUTOMATICO CON COMANDO

A DISTANZA

ATTENT ION! AUTOMATIC MACHINE WITH REMOTE CONTROL DEVICE

S3S3

M1 M2

Ref.

Fig.

VA VB

VD VE

ISTRUZION I PER L’INSTALLAZIONE E L’USO

PRIMA DI INSTALLARE E UTILIZZARE L’ATTUATORE È OBBLIGATORIO CHE

L’INSTALLATORE E L’UTILIZZATORE LEGGANO E COMPRENDANO

IN TUTTE LE SUE PARTI IL PRESENTE MANUALE.

ATTUATORE A CATENA

PER AUTOMAZIONE FINESTRE C160

COD. 0P5295

VER.0.0 REV.03.17

istruzioni originali

IL PRESENTE MANUALE È PARTE INTEGRANTE DELL’ATTUATORE E DEVE

OBBLIGATORIAMENTE ESSERE CONSERVATO

PER FUTURI RIFERIMENTI FINO ALLA DEMOLIZIONE DELLO STESSO.

C160RWA

C160

AF TC Ø4.8x16

AF TC Ø4.2x19

AF TC Ø4.8x16

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario