6
3.5 How to Erase the WiFi remote control code from the gate opener
Press and hold the remote control programming button (CODE SW button, LNSW
button, Learn button, etc.) on the gate opener control board until the (REM LED,
LEARN LED, etc.) from ON to OFF or LCD display “dL”, and then release the button.
Now all remote controls include the WiFi remote control codes have been erased from
the gate opener.
4. Settings of the App & Device
4.1 A schedule could be set to let the remote control work automatically if you want to.
Click “Schedule”and then click “Add”to set a schedule. You can set the schedule as
you need, then click “Save”.
NOTE: The schedule can only be implemented if WiFi is connected.
4.2 You can click the icon in the upper right corner to enter the setting of the device.
4.2.1 You can rename the WiFi remote control, check the device information, check
"Tap-to-Run" and "Automation", and rate the WiFi remote control. You can also set
device offline alerts.
4.2.2 You can share the remote control to any other person. Click “Share Device”will
enter sharing. Select the sharing method, you can choose third-party software or TUYA
Smart. If you choose TUYA to share device, select the country code and account to
share it. The one you want to share to should be installed the app, register and login
into the app. The device will appear to his APP and he will have the right to control the
device.
