ToolKitRC P200 Manual de usuario
@ToolkiRC 2021
1
P200
Manual V1.0
2021.02
www.toolkitrc.com
ToolkitRC Technology (Shenzhen) Co., Ltd
@ToolkiRC 2021
2
Introduction
Thank you for purchasing the M7 model tool chain
product, please read this manual carefully before using
it.
Key Points
Tips
Important
Information
Further information
To ensure you have the best experience with this
product please scan the QR code below to stay up to
date with news, information and firmware updates for
your charger. Or visit www.toolkitrc.com.
@ToolkiRC 2021
3
Safety
1. P200 allows the input voltage of DC 7-28V or AC
100-240V to ensure that the power supply voltage
conforms to the power supply. Pay attention to the
positive and negative polarity of the power supply
when connecting.
2. Do not use this product in the environment of heat
source, humidity, flammable and explosive gas.
3. Please use this product when someone is guarded to
prevent accidents.
4. When not using this product, please unplug the input
power in time.
5. When using the charging function, please set a
current that matches the battery. Do not set an
excessive current for charging, so as not to damage
the battery.
@ToolkiRC 2021
4
Contents
Introduction.......................................................... 2
Key Points............................................................. 2
Further information............................................. 2
Safety......................................................................3
Contents................................................................4
P200 Layout..........................................................6
Quick start.............................................................7
Output settings and display instructions.........9
1. The main interface display description........ 9
2. Description of USB interface display..........10
System settings.................................................. 12
other functions...................................................14
Specifications......................................................15
@ToolkiRC 2021
5
Product description
P200 is a mini desktop adjustable power supply,
with AC or DC two input modes, built-in 100W GaN AC
power supply, IPS wide-angle display screen records and
curve display voltage and current, and other features.
Built-in gallium nitride (GaN) small AC power
supply.
AC/DC two input modes.
The conversion efficiency is as high as 95%.
AC input: the full output power is up to 100W.
DC input: the full output power is up to 200W.
TYPE-C MAX output 65W.
Fast charge full protocol:
PD3.0/PD2.0/PPS/QC4/QC3.0/QC2.0
/AFC/FCP/SCP/PE2.0/PE1.1/SFCP/VOOC.
1.0-30.0V adjustable output voltage.
1.0-10.0A adjustable constant current。
Over voltage, over current, over temperature, short
circuit, multiple protections.
Metal dial wheel, feels hard and good.
IPS 1.54" high-brightness high-definition display.
The device is simulated as a U disk, and the
upgrade file is copied to realize the product
firmware upgrade.
@ToolkiRC 2021
6
P200 Layout
Front
Front
Back
Display
A Wheel
(Current
adjustment)
Output main port
AC power switch
AC Input port
DC Input port
Power button
Cooling fan
Type-C
fast charge output
V Wheel
(Voltage adjustment)
@ToolkiRC 2021
7
Quick start
1. Connect the 7-28V DC power supply to [DC input port]
on the back of the P200 or AC 100-240V to [AC power
port], and turn on [AC power switch].
2. Press the front [Power button] once, the display shows
the boot logo and stays for 2 seconds.
3. At the same time, it is accompanied by do-re-mi boot
sound.
4. After the boot is completed, the screen enters the
main interface and displays as follows:：
5. Fluctuating [V dial], set the voltage to be output.
6. Fluctuation [A dial], set the output constant current.
7. Short press [V dial] to output the set voltage from the
main port.
8. Short press [A dial] to enter the TYPE-C information
interface.
9. Long press [V dial] to stop the output and enter the
system setting.
@ToolkiRC 2021
8
10. Long press [A dial], the accumulated capacity and
time information will be cleared.
===================================
Warning:
1. Inputting too high DC voltage may damage the
product.
2. Do not connect to the input terminal if the
voltage value is not marked.
3. When the output is connected to the lithium
battery for charging, pay attention to the full voltage of
the battery.
===================================
@ToolkiRC 2021
9
Output settings and display
instructions
Turn the [V dial] on the main interface to set the
voltage to follow the adjustment. The step voltage can
be adjusted in the system menu. Turn the [V dial] to set
the maximum constant current value that requires
constant current. After setting the required voltage and
current, short press [V dial] once to output the set
voltage from the main port. At the same time, the
real-time monitoring value will be displayed in color, and
the following interface will be displayed:
1. The main interface display description
USB 12.0V 2.0A: Output voltage and current of
TYPE-C port.
55.2 ℃ : Internal real-time monitoring of
temperature.
@ToolkiRC 2021
10
Curve area: Real-time recording of the voltage and
current of the output main port.
000:59: The accumulation of the output time of the
main port.
50.0W: The current output power of the main port.
88Wh: Main port output power statistics.
3.00A: The real-time current value output by the
main port.
12.0V: The real-time voltage value output by the
main port.
10.0A: The set maximum constant current value.
12.0V: The set maximum constant voltage value.
2. Description of USB interface display
In the main interface, short press [A dial] once to enter
the USB-TYPE-C output monitoring interface, as shown
in the figure below:
12.00V: TYPE-C port output voltage real-time value.
2.00A: TYPE-C port output current real-time value.
Tabla de contenidos
