1.
Safety Instructions & Precautions
Do not operate the unit in high-humidity areas, or expose it to water or
moisture. No objects filled with liquid should be placed on the device.
Disconnect the product from the wall outlet prior to cleaning. Use a light,
damp cloth (no solvents) to dust or clean the product.
Do not block or cover slots and openings in the unit. These are provided for
ventilation and protection from overheating. Never place the unit near or
over a radiator or heat register. Do not place the unit in an enclosure such as
a cabinet without proper ventilation.
We strongly recommend using the enclosed ground wire connecting to the
ground cable of your house/building to avoid voltage spikes or ground fault.
Never insert objects of any kind into the unit through openings, as the objects
may touch dangerous voltage points or short out parts. This also could cause
fire or electrical shock.
When replacement parts are required, ensure that the service technician uses
replacement parts specified by the seller. Unauthorized substitutions may
damage the unit or cause electrical shock or fire, and will void the warranty.
Upon completion of any service or repair to the unit, ask the service
technician to perform safety checks to ensure that the unit is in proper
operating condition.
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER FROM THIS UNIT.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
