Tohken THIR-6000 Bluetooth Series Manual de usuario

THIR-6000 Series

Handheld Image Reader

(Linear / 2D Scanner)

OPERATION MANUAL

TOHKEN CO., LTD.

Edition

January 9, 2007

[Memorandum]

The contents of this document may not be copied or supplied in any form, in whole or in part

without prior written consent from Tohken

Tohken does not assume responsibility for errors or omissions and makes no guarantees or

representations related to the quality, content or adequacy of the information contained in this

document.

Tohken does not warrant or represent any license, either expressed or implied, granted under any

patent, copyright, or other intellectual property of Tohken for any product or process that uses

Tohken products or services. Tohken does not endorse third party products or services published

in this document.

Tohken makes no guarantee of performance or suitability of its products, nor does Tohken assume

any liability that occurs from the use of the product. Tohken reserves the right to make changes to

its products and this document without any notice.

APPLICATION NOTICE

Tohken products are not designed or intended for use as a component in life support appliances or

as surgical implants nor in any other application where failure of the product could cause personal

injury or death. The use of Tohken products shall indemnify and hold harmless Tohken and its

shareholders against any claims of injury or death associated with unintended authorized use.

TRADEMARKS

Tohken, Tohken and the Tohken Logo are marks of Tohken Inc. The names of any companies and

products mentioned in this document may be the marks of their respective owners.

CONTACT INFORMATION

Tohken Ltd., 2-7-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo Japan 163-0710

Tel: +81-3-5325-4311

www.tohken.co.jp

Introduction

Thank you for purchasing this product.

This manual explains the features of this product, operation, system configuration,

specifications, etc.

In order to use the product properly, please read this manual carefully.

When there is any problem during normal use, please document it carefully to be

reproduced by our support team.

The contents of this manual may be changed without a notice. Please check our website

for regular updates

Safety Notice

Please do not disassemble this product as this will void the warranty and might

cause an accident.

Please follow the warnings or notices of computers to be used with this

product.

Please stop using the product when there is smoke smell or strange sound to

avoid fire.

DO NOT

DISASSENBLE

PULL OFF

CAUTION

Please do not use AC adapters other than

the recommend AC power adaptor which is

described in the “unpacking the carton” section. Failure to do so might affect the

performance of the unit.

If the voltage or polarity used is different from the specification, it might cause product

failure and could be the cause of an accident.

Handling with care

CAUTION

About backup data

This product has a memory backup function. This backup can not guaranteed if repair,

reconstruction, and upgrade are performed on this Image Reader.

CAUTION

Please do not use this product at temperature or humidity ranges that are different from

the product specifications or under the direct sunshine.

CAUTION

Please do not drip water, moisture, oil, etc. on the unit.

CAUTION

When stain or dust is stuck on the reading window, please follow the following steps to

clean it:

- Wipe off stain lightly with cloth or swab (wet with alcohol)

- Wipe off again with the dry clothes.

DON NOT Wipe off with any chemicals.

CAUTION

This is a high-precision optical device. Avoid shocking the product such as fall.

III

Unpacking the product

After you open the shipping package containing the THIR-6000, take the following steps:

1- Check for damage that might occur during the shipping process. Report the damage

immediately to the carrier who delivered the shipment.

2- Save the shipping container for later storage or shipping.

3- Make sure everything ordered is present.

Items included with the product

•AC Power Adaptor (Optional): In case of purchase separately, select an adapter with output

DC3V to DC6V range and more than 10W. Please confirm polarity and DC plug type as below.

Polarity:

DC plug type: EIAJ RC5320A Voltage Segment 2

CAUTION

For THIR-6000U

The current drawn is sometimes over 500mA standard of USB which means that there is

possibility for some problems when THIR-6000 is connected directly to the host.

Tohken recommends the use of an exclusive USB HUB (TUR-100) between THIR and host PC,

or please supply power by using branched USB cable (CA-3000USB) and AC.

To use the branched USB cable, follow the following procedures:

①

Connect THIR’s USB connector to USB jack of branched USB cable.

Connect USB plug of branched USB cable to the USB connector of host PC.

②

Connect AC adopter’s plug to the jack of branched USB cable.

③

If the power is supplied correctly, there will be three continuous beeps.

Table of Content

INTRODUCTION.........................................................................................................................I

SAFETY NOTICE ........................................................................................................................I

HANDLING WITH CARE......................................................................................................... II

UNPACKING THE PRODUCT................................................................................................III

GETTING STARTED .......................................................................................................... 1

1.1

CANNER COMPONENTS

...................................................................................................... 3

1.2

OW IT WORKS

.................................................................................................................... 5

ASSEMBLING THE HARDWARE..................................................................................... 6

2.1.1

THIR-6000

ABLE

ONNECTION

..................................................................................... 6

2.1.2

THIR-6000U.................................................................................................................... 7

2.1.3

THIR-6000U

AS A

HID.................................................................................................... 7

2.2

ETTING UP THE

OST

OMPUTER

.....................................................................................

2.3

HANGING THE SETTINGS OF THE SCANNER

.......................................................................

OPERATION........................................................................................................................ 9

3.1

ARCODE READING

.............................................................................................................. 9

3.2

EEPING

OUNDS

.............................................................................................................. 10

3.3

MAGE DATA TRANSACTION

................................................................................................ 10

3.3

IBRATION

......................................................................................................................... 10

RS-232C SERIAL COMMUNICATIONS ......................................................................... 11

4.1

ATA

RANSACTION

.......................................................................................................... 11

4.2

MAGE

ATA

RANSACTION

............................................................................................... 11

SPECIFICATIONS ............................................................................................................ 12

5.1

ENERAL SPECIFICATIONS

................................................................................................ 12

5.2

UNCTIONAL SPECIFICATION

............................................................................................ 13

5.3

EADING

ANGE

EPTH

................................................................................................... 14

5.4

ERIAL

NTERFACE

............................................................................................................ 16

5.5

OMMUNICATION SETTINGS

(RS232C) ............................................................................. 16

6. DIMENSIONS....................................................................................................................... 17

6.1

OUSING DIMENSIONS

...................................................................................................... 17

7. SPECIALTY FUNCTION..................................................................................................... 1

7.1

LOBAL

HUTTER

............................................................................................................. 1

7.2

UTO DETECTION MODE

.................................................................................................... 20

7.2.1 Overview.................................................................................................................... 20

7.2.2 How to use ................................................................................................................. 21

7.3

HOOSING

IGH

PEED MODE OR

ORMAL MODE

............................................................ 23

7.4

IGH

PEED MODE

............................................................................................................ 23

TROUBLESHOOTING...................................................................................................... 24

HE UNIT DOES NOT WORK WHILE PUSHING THE READ TRIGGER SWITCH

. ........................ 24

Is power supply voltage within specification?.................................................................. 24

Is power supply polarity correct?...................................................................................... 24

Is the power rating of the power supply enough?............................................................ 24

ARCODE

ANNOT BE

EAD

.............................................................................................. 24

Is a code setup correct?...................................................................................................... 24

Is reading distance suitable?............................................................................................. 24

Is the surface of the code glossy? ...................................................................................... 24

Is the reading window clean? ............................................................................................ 24

Is the print quality of the code good?................................................................................ 24

HE DATA DOES NOT TRANSMIT OR THE DATA ITSELF IS CORRUPTED

................................ 25

Is the setup with host computer correct? ......................................................................... 25

Do you set fixed digit for ITF ............................................................................................ 25

1. Getting started

Equipped with a powerful state-of-the-art 2D Imager Scanner and processing CPU, the

THIR-6000 is ready to capture images as well as decoding 1D or 2D bar codes.

The THIR-6000 is a 2D Imager Scanner that reads Liner, 2D, and Postal barcodes to meet

many different requirements in Delivery, Transportation, Meter Reading, and many other

applications.

The ergonomic design of the THIR-6000 provides user comfort even during lengthy scanning

sessions.

The THIR-6000 is available with different interfaces to accommodate various applications.

The THIR-6000 has an RS-232C interface to connect to the host computer. The THIR-6000U

has USB interface to connect to a host computer that runs Windows2000/XP. THIR-6000U

can be used as a Human Interface device. The configuration barcodes are prepared to

change THIR-6000U’s interface from USB to HID and vice versa. Human Interface Device

function can send data to application software same as keyboard input.

1) Supported barcodes

The unit can read the following symbols:

1D bar codes:

Code39

Code128

Codabar

ITF (interleaved 2 of 5)

JAN/EAN/UPC

RSS

Code93

2D codes:

Data Matrix (ECC200)

QR Code

Micro QR

PDF 417

Micro PDF

Maxi Code

Composite

2) Picture taking (except THIR-6000U as a Human Interface Device)

The THIR-6000 can take 24bit color and Grey scale pictures for example signature

capture.

3) EMC (Electromagnetic compatibility) regulatory

This unit is designed for the following regulatory.

Europe : CE Class A

United States : FCC Class A

Taiwan : BSMI Class

4) Ordering information

THIR-6000 U

1. Interface

If “U” follows “THIR-6000”, the scanner has USB interface.

Otherwise its interface is RS232C.

According to this rule, there are 3 types of THIR-6000 family.

・

THIR-6000

・

THIR-6000U

Otros manuales para THIR-6000 Bluetooth Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de Tohken

Tohken

Tohken THIR-3000DM Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario