Toa BS-20 Manual de usuario

(Operating instructions)

SPLASHPROOF SPEAKER SYSTEM

Model BS-20W

US

General description

The TOA BS-20W is a splashproof type speaker system and incorpo-

rates a 5.2 inch (13cm) woofer and a piezo driver unit with constant

directivity (CD) horn ensuring a uniform sound dispersion pattern (30°

horizontally and 90° vertically) especially for railway station platform

application.

Its sealed type of enclosure made of ABS resin and finished painting

for protection of ultraviolet rays assures splashproof capabilities, and

also its speaker unit is waterproof.

Applications include high humidity/temperature areas as well as out-

doors or under the eaves where the speaker is likely to be exposed

to rain.

TOA Corporation

Installation

Dimensional diagram for mounting the bracket

The speaker weight 8.0 Ibs. (3.6 kg).

If you fear that the ceiling or the beam will not stand the speaker weight, install the

speaker after fully supporting with reinforcement at installation places.

Changing the wattage (impedance)

Remove the waterproof cap at the side where the woofer is

attached.

Select the desired impedance (wattage) by rotating the rotary

switch with a flat head screwdriver.

After setting the impedance, be sure to replace the cap as it

keep's the speaker splashproof.

(Any change in impedance maintains the siren sound pressure

level 90dB/m or better.)

The BS-20W is factory-wired to 20 W

Polarities: black (HOT), white (COLD).

(70V line)

Specifications and Characteristic diagrams

Type:

Sealed type

Speaker for Mid/Low frequency:

One 5.2 in. (13cm) dia. splashproof cone

speaker

Speaker for High frequency:

CD horn (30° horizontal by 90° vertical) plus

splashproof piezo driver unit

Rated power input:

20W (Cont.PGM 60W at 8 ohms)

Nominal impedance:

245 (20W), 490 (10W) and 980 (5W),

8

Output sound pressure level:

94dB/w/m

Siren sound pressure level

(Siren SPL classification):

90dB or better (1w/1m), Code "A"

Frequency response:

100 Hz ~ 20 kHz

Ambient temperature:

-4°F~+131°F (-20°C ~ +55°C)

Material & Finish:

Enclosure: ABS resin, paint

Ranching net/fixing angle: Zinc-coated

steel plate, paint

Angle bolts: Stainless steel

Dimensions:

13.5(W)x7.9(H)x6.9(D) in.

342(W)x200(H)x175(D) mm

Weight:

8.0

Ibs.

(3.6

kg)

Specifications are subject to exchange without notice.

TOACorporation

KOBE, JAPAN

133-01-311-9A

1 kHz

2 kHz

5 kHz

Polar response

horizontal

vertical

Frequency response

(Anechoic chamber, 1W/1m, 1/3 octave pink noise)

Impedance

Wattage

Precaution

Otros manuales para BS-20

1

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario