Toa D-2012AS Manual de programación

Thank you for purchasing TOA's Console Case.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

D-2012ASCONSOLE CASE

ASSEMBLING MANUAL

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

CAUTION

1. SAFETY PRECAUTIONS

Be sure to follow all the precautionary instructions in this section, which contain important cautions regarding

safety.

After reading, keep this manual handy for future reference.

• Avoid touching the decorative panel's sharp metal edge to prevent injury.

2. GENERAL DESCRIPTION

The D-2012AS Console Case is a desk mount kit for the D-2012C Remote Console Unit, which includes an

armrest, side and decorative panels.

3. COMPONENT PARTS

Side panel R

Machine screw

M4 x 25 (with washer):

11 pieces

Decorative panels

Machine screw M4 x 10:

4 pieces

Rubber foot: 4 pieces

Armrest

Side panel L

4. HOW TO ASSEMBLE

Step 1. Remove 3 screws on each side of

the D-2012C to detach the rack

mounting brackets.

The removed screws are not

used.

D-2012C

Rack mounting bracket

5. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Finish Side panels: MDF, paint, black, mat finish

Armrest: MDF, leather upholstery, black, mat finish

Decorative panels: Stainless steel, silver

Dimensions 505 (w) x 127.5 (h) x 333.4 (d) mm or 19.88" x 5.02" x 13.13" (assembled)

Weight 2.3 kg or 5.07 lb (this product only), 7.5 kg or 16.54 lb (assembled)

133-22-164-60

URL: http://www.toa.jp/

Step 2. Attach the 4 rubber feet to the bottom surface of the D-

2012C using the 4 supplied screws.

Be sure to attach the rubber feet, as the air vents are

provided at the bottom surface.

Step 3. Attach the side panel L to the left side of the D-2012C

and side panel R to its right side with 2 each screws.

Step 4. Fit each decorative panel into the holes on the side

panels L and R, then secure them with 2 each screws

from the side panels inside.

Rubber foot*

Machine screw

M4 x 10*

Step 5. Attach the armrest to the D-2012C's front panel with 3 screws.

Side panel L*

Side panel R*

Machine screw M4 x 25

(with washer)*

Decorative panel*

Machine screw M4 x 25

(with washer)*

3

4

Machine screw

M4 x 25

(with washer)*

[Finished assembly]

Armrest*

* Component parts of the D-2012AS.

Tabla de contenidos

Otros manuales de Mezclador de música de Toa

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario