Toa HF-250M Manual de usuario

TOA INTERCOM SYSTEM

INTERCOM STATION HF-250M

OPERATING INSTRUCTIONS

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend you to keep this manual handy for future reference.

TOA Corporation

All manuals and user guides at all-guides.com

all-guides.com

except EX-200 and EX-600 .

CONTENTS

General description

Nomenclature and functions

Installation and connection

. Desk-top applications

2. Wall-mounted applications

(2. ) Wall-mount installation without a switch box

(2.2) Wall-mount installation with a switch box

3. Internal speaker volume (L/H) adjustment

4. External speaker connection

5. Speaker volume and microphone sensitivity adjustment

6. External microphone or headset connection

Exchange connection

. EXES-6000 series exchange connection

( . ) When connecting to the DT-E70 data transmitting unit

( .2) When not connecting to the DT-E70 data transmitting unit

2. EXES-2000 series exchange connection

Operation

. Auto-dialer registration

2. Re-registration

3. Detaching the auto-dialer name card

4. Setting calling party station number indication

5. His-own-station number registration

6. Calling

7. Answering

Liquid crystal display senction

Specifications

GENERA DESCRIPTION

The TOA HF-250M intercom station is designed for exclusive use with TOA's 2-line intercom system.

It features an auto-dialer function (up to 6 stations), and both handset and hands-free communication

capability. In addition, a calling party indication function can be utilized in conjunction with the DT-E70 (data

transmitting unit) and the EX-6 0/620/630 (EXES-6000 series exchange)

The HF-250M can be use in either desk-top or wall-mounted applications.

3-4

- 2 -

All manuals and user guides at all-guides.com

NOMENC ATURE AND FUNCTIONS

[FRONT VIEW]

Liquid crystal display (LCD)

LCD cover

Internal speaker

Station number directory

Cord

Handset

"In-use" lamp

Auto-dialer keys

Hook switch

Station number card

Cradle hook

Hands-free microphone

: Displays call status and registered data.

: Sounds call tones and permits "hands-free" conversation.

: Terminates calls.

Used for paging, registration, and other programing function.

Comes on during the conversation.

Used for auto-dialer station registration (up to eight stations each on A

or B page).

Used for privacy mode operation.

Selects auto-dialer pages A or B.

Used in PTT operation or for voice calls in privacy mode.

Switches on power when handset is lifted.

Holds handset in wall-mounted applications.

key

page select key

key

Dial keys

key

- 3 -

All manuals and user guides at all-guides.com

Terminal cover

Hook for wall-mounting bracket

External speaker terminal Used for connection of the external speaker.

Microphone sensitivity control Used for adjustment of the external microphone.

Speaker volume control Used for adjustment of the external speaker.

[TOP VIEW]

[EXTERNAL MIC/HEADSET] jack : External microphone or headset jack.

[REGISTER ON/OFF] switch : Enables auto-dialer registration. Normally set to OFF.

[LINE] connector : Insert modular (6-pin, 4-conductor) telephone line plug.

[SIDE VIEW]

[SPEAKER VOLUME (L/H)] control : Internal speaker volume selection.

[BOTTOM VIEW]

- 4 -

All manuals and user guides at all-guides.com

INSTA ATION AND CONNECTION

1. Desk-top applications

Connect the supplied modular plug.

Attach a modular plug to 6-pin modular jack type

rosette (4-conductor) and insert the plug into the unit.

2. Wall-mounted applications

(2.1) Wall-mount installation without a switch box.

Pull out the cradle hook and rotate 80° for wall-

mounted use.

Install the wall-mounting hook.

Use wood screws to mount the bracket directly on the

wall.

Connect the supplied modular plug.

Attach a modular plug to 6-pin modular jack type

rosette (4-conductor) and insert the plug into the unit.

Hang the station on the wall-mounting bracket.

Align the four slots on the station bottom with the

wall-mounting bracket hooks, press on, and lock in

place by sliding downward.

- 5 -

All manuals and user guides at all-guides.com

(2.2) Wall-mount installation with a switch box.

Pull out the cradle hook and rotate 80° for wall-

mounted use.

Install the wall-mounting hook.

Use screws to mount the bracket directly on the wall.

Connect the supplied modular plug.

Attach a modular plug to 6-pin modular jack type

rosette (4-conductor) and insert the plug into the unit.

Hang the station on the wall-mounting bracket.

Align the four slots on the station bottom with the

wall-mounting bracket hooks, press on, and lock in

place by sliding downward.

- 6 -

All manuals and user guides at all-guides.com

all-guides.com

3. Internal speaker volume ( /H) adjustment

Select the internal speaker volume setting (L/H) that best suits the mounting location.

4. External speaker connection

If the internal speaker's volume is insufficient, refer to following procedure to connect an external speaker

(4-8

) to the station.

Open the case and cut jumper wire JP3 or R82, located at the upper left-hand corner of the printed

circuit (PC) board.

Note : Sound from an external speaker is not reproduced when the jumper JP3 or R82 is cut.

Remove the underside terminal cover and connect the speaker cable to the EXT. SP terminals.

Terminal cover

Speaker cable

External speaker terminals

Microphone sensitivity control

Speaker volume control

- 7 -

All manuals and user guides at all-guides.com

5. Speaker volume and microphone sensitivity adjustment

The station's speaker volume and microphone sensitivity can be independently adjusted at the controls,

located under the terminal cover.

Microphone sensitivity control

Speaker volume

6. External microphone or headset connection

An external microphone or headset can be connected for use instead of the handset. Refer to the

illustration below for connection.

Note : If a headset is connected, its operation is essentially the same as that of headset. Likewise, if an

external microphone is connected, its operation is essentially the same as that of the internal

microphone. Accordingly, when wishing the hands-free conversation using the station with an

external microphone, pull out the external microphone plug from the station.

- 8 -

All manuals and user guides at all-guides.com

EXCHANGE CONNECTION

1. EXES-6000 series exchange connection

(1.1) When connecting to the DT-E70 data transmitting unit

Modular plug's L and L2 connect to terminal box BX-6 0 or BX-620. Plugs L3 and L4 connect to

terminal box YC-900 (optional) with a 6-pin modular jack type rosette (4-conductor) < site procurement >.

[ EXES-6000 Series Exchange Connection ]

Note : . The calling party indication function is not available when the exchange is EX-600.

2. Detach the front and upper panels of the exchange cabinet when connecting the EX-600

exchange using the optional YR-806 connecting cable.

6-pin modular jack type

rosette (4-conductor)

[Front view]

[YC-900]

[BX-6 0/620]

Data line

Intercom line

6-pin modular jack type

rosette (4-conductor)

[Rear view of DT-E70]

YC-900

BX-610/620

EXES-6000

series exchange

Interface

connector

YR-810

24V DC power supply

[AD-242A (2.5A)]

HF-250M HF-250M HF-250M

Modular plug

DR-B61

YR-803

YR-802/YR-806

- 9 -

All manuals and user guides at all-guides.com

(1.2) When not connecting to the DT-E70 data transmitting unit

Modular plug's L and L2 from the HF-250M connects to the BX-6 0 or BX-620 terminal box using 6-pin

modular jack type rossette (4-conductor) < site procurement >.

Note : Calling party and time indications can not be displayed when the DT-E70 data transmitting unit is

not connected.

2. EXES-2000 series exchange connection

Modular plug's L and L2 from the HF-250M connects to the EX-200 exchange using 6-pin modular jack

type rossette (4-conductor) < site procurement >.

Note : Calling party and time indications are not displayed.

6-pin modular jack type rosette

(4-conductor)

HF-250M HF-250M HF-250M

BX-610/620

YR-810

Modular plug

EXES-6000

series Exchange

HF-250M HF-250M HF-250M

Modular plug

6-pin modular jack type

rosette (4-conductor)

EX-200 Exchange

- 0 -

All manuals and user guides at all-guides.com

Otros manuales para HF-250M

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Toa

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario