13、Do not block fan intake or exhaust ports. Do not operate
equipment on a surface or in an
Environment which may impede the normal flow of air around
the unit,such as a bed,rug.
Weathersheet,carpet,or completely enclosed rack.. If the unit is
used in an extremely dusty or smoky envronment,the unit
should be periodically “blown free” of foerign matter.
14、Do not remove the cover.Removing the cover will expose
you to potentially dangerous voltages.There are no user
serviceable parts inside.
15、Do not drive the inputs with a signal level greater than that
required to drive equipment to full output.
16、Do not connect the inputs/outputs of amplifiers or consoles
to any other voltage source,such as a battery,mains source,or
power supply,regardless of whether the amplifier or console is
turned on or off.
17、Do not run the output of any amplifier channel back into
another channel’s input.Do not parallel-or series-connect an
amplifier output with any other amplifier output.Australian
Monitor Inc is not responsible for damage to loudspeakers for
any reason.
18、Do not ground any red (“hot”) terminal. Never connect a
“hot” (red) output to ground or to another “hor” (red) output!
19、Non-use periods .The power cord of equipment should be
unplugged from the outlet when left unused for a long period of
time.
20、Service Information Equipment should be serviced by
qualified service personnel when:
A、The power supply cord or the plug has been damage.
B、Objects have fallen,or liquid has been spilled into the
equipment
C、The equipment has been exposed to rain.
D、The equipment does not appear to operate normally,or
