TKO 6620 Manual de usuario

6620

Owner's Manual

6620 HOME GYM

Table Of Contents

Read all precautions and instructions in this manual before using this

equipment.

! CAUTION

Important Safety Instructions-------------------------------------------------------------- 3

Instructions------------------------------------------------------------------------------------ 4

Parts List--------------------------------------------------------------------------------------- 5

Exploded View ------------------------------------------------------------------------------- 7

Measurement Guide------------------------------------------------------------------------ 8

Assembly Instructions---------------------------------------------------------------------- 9

Assembly------------------------------------------------------------------------------------- 10

Cable View----------------------------------------------------------------------------------- 35

Weight Ratios------------------------------------------------------------------------------- 36

Maintenance Schedule-------------------------------------------------------------------- 37

General Maintenance Information------------------------------------------------------ 38

Weight Training Tips----------------------------------------------------------------------- 39

Specifications------------------------------------------------------------------------------- 39

─ 3 ─

Important Safety Instructions

Before beginning any fitness program, you should obtain a complete

physical examination from your physician. When using exercise equipment,

basic precautions should always be taken, including the following:

* Read all instructions before using the equipment. These instructions are

written to ensure your safety and to protect the unit.

* Do not allow children on or near the equipment.

* Use the equipment only for its intended purpose as described in this

guide. Do not use accessory attachments that are not recommended by

the manufacturer: such attachments might cause injuries.

* Wear proper exercise clothing and shoes for your workout----no loose

clothing.

* Be careful when getting on or off the equipment.

* Do not overexert yourself or work to exhaustion.

* If you feel any pain or abnormal symptoms, stop your workout immediately

and consult your physician.

* Never operate the unit when it has been dropped or damaged.

* Never drop or insert anything into any opening in the equipment.

* Always check the unit and its cables before each use. Make sure that all

fasteners and cables are secure and in good working condition.

* Frayed or worn cables can be dangerous and may cause injury.

Periodically check these cables for any indication of wear.

* Keep hands, limbs, loose clothing and long hair well out of the way of

moving parts.

* Do not attempt to lift more weight than you can control safely.

* Do not use the equipment outdoors.

Personal Safety During Assembly

* Read each step in the assembly instructions and follow the steps in

sequence. Do not skip ahead. If you skip ahead, you may learn later that

you have to disassemble components and that you may have damaged

the equipment.

* Assemble and operate the equipment on a solid, level surface. Locate the

unit a few feet from walls or furniture to provide easy access. The

equipment is designed for your enjoyment. By following these precautions

and using common sense, you will have many safe and pleasurable hours

of healthful exercise with the equipment.

Instructions

Before beginning assembly please take the time to read instructions

thoroughly. Please use the various lists in this manual to make sure that all

parts have been included in your shipment. When ordering, use part number

and description from the lists. Use only our replacement part when servicing.

Failure to do so will void your warranty and could result in personal injury.

The equipment is designed to provide the smoothest, most effective

exercise motion possible. After assembly, you should check all functions to

ensure correct operation. If you experience problems, first recheck the

assembly instructions to locate any possible errors made during assembly. If

you are unable to correct the problem, call your authorized dealer. Be sure to

have your serial number and this manual when calling. When all parts have

been accounted for, continue on.

Tools Required

Ratchet Wrench and Socket

Adjustable Wrench

Rubber Mallet

Hex Key Wrench Set

─ 4 ─

─ 5 ─

Par ts List

NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED

Item No. Description Qty Item No. Description Qty

1 Rear Frame 1 42 Weight Shroud B 1

2 Up Frame 1 43 Long Lat Bar 1

3 Rear Upright 1 44 Short Lat Bar 1

4 Right Base Frame 1 45 Adjustable Stopper 1

5 Right Top Frame For Guide Rod 1 46 Cable Retainer Bracket 2

6 Seat Pad Support Receptacle 1 47 Guide Rod Φ25*2.5*1855 4

7 Main Upright 1 48 BENCH Seat Pad 1

8 Left Base Frame 1 49 Back Pad 1

9 Left Top Frame For Guide Rod 1 50 Seat Pad 546*318*75 1

10 Press Arm Support 1 51 Back Pad 546*290*75 1

11 Press Station Base Frame 1 52 15LB Weight Plate 10

12 Chest Press Cam 1 53 10LB Weight Plate 18

13 Bench Main Frame 1 54 5LB Weight Plate 10

14 Bench Front Frame 1 55 Top Plate 2

15 Bench Rear Frame 1 56 Weight Pin 2

16 Bench Seat Pad Support 1 57 4.5" Pulley 19

17 Bench Back Pad Support 1 58 Foam Padding 10

18 Foam Adjustable Bracket 1 59 Pop Pin(Locking) 3

19 Front Upright 1 60 Ab Strap 1

20 Leg Extension Lever 1 61 Lat Strap 2

21 Pec Dec mount 1 62 Ankle Strap 1

22 Left Pec Dec Arm 1 63 Lat Bar Grip 4

23 Right Pec Dec Arm 1 64 Bench Seat Pad ADJ. Bar 1

24 Pec Dec Handle Bar 2 65 Ball Head for Pin 1

25 Foam Frame w/o Shaft 1 66 Spring Φ1.5*Φ13*43 1

26 Foam Frame w/Shaft 1 67 Spring Φ1*Φ13*38 1

27 Seat Pad Support 1 68 Pin Shaft 1

28 Back Pad ADJ. Bracket 1 69 Pin Knob 1

29 Left Leg Hold Leg Frame 1 70 Nylon Spacer 1

30 Right Leg Hold Leg Frame 1 71 Grip Φ26*Φ19*80 1

31 Pulley Bracket Block 1 72 Handle Grip Φ36*Φ30*188 3

32 Pulley Bracket 1 73 Safety Pin 2

33 Pulley Bracket w/Shaft 2 74 Pop Pin 1

34 Long Foam Tube 1 75 Pillow block Bearing 2

35 Press Arm 1 76 Pec Dec Stop Bumper 2

36 Right Squat Arm 1 77 Bearing Φ25 4

37 Left Squat Arm 1 78 Caster Black 2

38 Press Station Shaft 1 79 Foot Cap 1 □50.8 4

39 Bench Back Pad ADJ. Frame 1 80 Base Pad 8

40 Foam Shaft 1 81 □25 End Cap Bumper 1

41 Bottom Weight Shroud 2 82 U Shape Pin 1

─ 6 ─

Par ts List

NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED

Item No. Description Qty Item No. Description Qty

83 Sping Φ1*Φ8*35 1 123 Long Pulley SpacerΦ20*Φ10.5*14 8

84 Nylon Lock Nut M6 17 124 Cable Adaptor 1

85 Slip Tension Pin 1 125 Flat Washer Φ13*Φ24*1.5 25

86 Shaft For Leg Extension Φ16*M8*61 1 126 Nylon Lock Nut M12 13

87 Gear Hook 7 127 Button Head Cap Screw M10*50 4

88 Short Chain Φ5*5 1 128 Button Head Cap Screw M10*25 12

89 Roller Pad Tube Cap Φ25 6 129 Flat Washer Φ11*Φ38*2 8

90 Plastic Washer Φ66*8 8 130 Button Head Cap Screw M12*85 4

91 Plug Φ50 2 131 Button Head Cap Screw M12*80 4

92 Plug □40*80 1 132 Button Head Cap Screw M12*125 4

93 Plug □50.8*76.2 4 133 Button Head Cap Screw M10*105 2

94 Plug □50.8 6 134 Button Head Cap Screw M10*85 6

95 Plug □44.5 4 135 Button Head Cap Screw M10*80 7

96 Plug □50*25 8 136 Button Head Cap Screw M10*75 12

97 Socket Set Screw M8*6 3 137 Button Head Cap Screw M10*70 11

98 Button Head Cap Screw M8*15 9 138 Button Head Cap Screw M10*65 7

99 Weight Stack Bumper 4 139 Button Head Cap Screw M10*60 1

100 Rubber Mat 1 140 Socket Set Screw 10-32*3.2 6

101 Chrome Washer Φ38*Φ11*2 2 141 Button Head Cap Screw M10*45 14

102 Big Washer Φ56.5*Φ10.5*5 2 142 Button Head Cap Screw M10*30 4

103 Flat Philips Screw M4*20 2 143 Flat Washer Φ11*Φ20*2 128

104 Bronze Bushing Φ25.4 8 144 Nylon Lock Nut M10 56

105 Bronze Bushing Φ12.2 6 145 Top Weight Shroud 2

106 Plastic Button 8 146 Hex Key S6 1

107 Aluminium Cap Φ32 3 147 Hex Key S4 1

108 Plug Φ25 2 148 Lube 1

109 Rubber Stopper 2 150 Selector Rod 2

110 Lat Cable 1 151 Screw Bolt M12*35 2

111 Low Row/Abdominal Cable 1 152 Hex Nut M10 1

112 Pec Dec Cable 1 153 □50.8 Foot Cap 2 4

113 Leg Press Cable 1 154 Button Head Cap Screw M8*25 8

114 Long Chest Cable 1 155 Flat Washer Φ9*Φ16*1.6 10

115 Short Chest Cable 1 157 Middle Weight Shroud 2

116 Long Chain Φ5*12 1 158 Small Spacer Φ17.5*Φ7*5 16

117 Flat Washer Φ9*Φ22*2 7 159 Button Head Cap Screw M6*18 16

118 Spring Washer Φ8 1 160 Flat Washer Φ6.6*Φ12*1.6 32

119 Spring Washer Φ10 17 161 Wrench 17-19 1

120 Bronze Bushing Φ16 2 162 Plug □40*80 1

121 Longer Pulley SpacerΦ20*Φ10.5*19.5 6 163 Hex Key 3/32" 1

122 Short Pulley SpacerΦ20*Φ10.5*11.5 2 164 Paint 1

─ 7 ─

Exploded View

─ 8 ─

BHCS = Button Head Cap Screw

SHCS = Socket Head Cap Screw

FHCS = Flat Head Cap Screw

HHB = Hex Head Bolt

Measurement Guide

─ 9 ─

Assembly of the equipment takes professional installers about 2 hours. If this is

the first time you have assembled this type of equipment, plan to spend more

time. It is strongly recommended to assemble the equipment by professional

installers. You may find it quicker, safer, easier to assemble this equipment with

the help of a friend, as some of components may be large, heavy or awkward to

handle alone. It is important that you assemble your product in a clean, clear,

uncluttered area. This will enable you to move around the product while you are

fitting components and reduce the possibility of injury during assembly.

As with any assembled part, proper alignment and adjustment is critical. While

tightening the fasteners, be sure to leave room for adjustments. Do not fully

tighten the fasteners until instructed to do so. Be careful to assemble the

components in the sequence presented in this guide.

Assembly Instructions

─ 10 ─

Assembly

Step 1

1. Attach the Right Base Frame (#4) to the Rear Frame (#1), using:

two M10*70 BHCS (#137) four Φ11*Φ20*2 Flat Washers (#143)

two M10 Nylon Lock Nuts (#144)

2. Attach the Left Base Frame (#8) to the Rear Frame (#1), using:

two M10*70 BHCS (#137) four Φ11*Φ20*2 Flat Washers (#143)

two M10 Nylon Lock Nuts (#144)

3. Attach four Guide Rod (#47) and four Weight Stack Bumper (#99) to the Rear

Frame (#1).

4. Attach the Rear Upright (#3) to the Rear Frame (#1), using:

two M10*75 BHCS (#136) four Φ11*Φ20*2 Flat Washers (#143)

two M10 Nylon Lock Nuts (#144)

Note: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.

Otros manuales de Gimnasio en casa de TKO

TKO

TKO 6330 Manual de usuario

TKO

TKO 874FID Manual de usuario

TKO

TKO 6610 Manual de usuario

TKO

TKO 824FID-B Manual de usuario

TKO

TKO 7043-G2 Manual de usuario

TKO

TKO 9050 Manual de usuario

TKO

TKO 846BBR-B Manual de usuario

TKO

TKO 522NWG Manual de usuario

TKO

TKO 864SB Manual de usuario

TKO

TKO 709SP Manual de usuario

TKO

TKO 860FB-B Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario