TitanTec HT340-1 Manual de usuario
TT-HT340-1
SAFETY FIRST
Instructions contained in warnings within this
manual marked with a symbol concern
critical points which must be taken into
consideration to prevent possible serious bodily
injury, and for this reason you are requested to
read all such instructions carefully and follow
them without fail.
■WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions which must be
followed in order to prevent accidents which
could lead to serious bodily injury or death.
IMPORTANT
This mark indicates instructions which must be
followed, or it leads to mechanical failure,
breakdown, or damage.
NOTE
This mark indicates hints or directions useful in
the use of the product.
1. Parts location
-----------------------------------------------------------------------------------------------------------------------------------------
1. Rear handle
2. Throttle Lock
3. Tank Cap
4. Choke Control
5. Front handle
6. Blade
7. Blade Guard
8. Blade Protector
9. Air Filter Cover
10. Primer Bulb
11. Fuel Tank
12. Handle Lock
13. Throttle Trigger
14. Starter
15. ON/OFF switch
16. Hand Guard
2. Specifications
-----------------------------------------------------------------------------------------------------
Model no. TT-HT340-1
Engine type 1E34F-G1 (air-cooled, 2-stroke)
Equipment mobility Hand-held
Engine displacement 25.4 cm3
Maximum engine power 0.75kw
Maximum Engine speed 10000min-1
Engine idling speed 3000 min-1 ±300
Spark Plug L8RTF
Fuel tank capacity 450ml
Mixture ratio Gasoline 2 5 : Oil 1
Blade Length 600mm
Cutting Length 550mm
Cutting thickness 28mm
Rear Handle rotation 5 positions (-900~+900)
Weight (without fuel) 6.3kg
Vibration at Front Handle A front_hv, eq: 3.225 m/s2
Vibration at Rear Handle A rear_hv, eq: 4.128 m/s2
Specifications are subject to change without notice.
3. Warning labels on the machine
------------------------------------------------------------------------------------------------------
For safe operation and maintenance, symbols are carved in relief on the machine. According to these
indications, please be careful not to make a mistake.
Read, understand and follow
all warnings.
Don’t work under raining
days.
Read the instruction manual
completely and carefully
before using the power tool.
The port to refuel the "MIX
FUEL"
Wear head, eye and ear
protection.
The port to refuel the "OIL"
Wear safety footwear Press the primer bulb several
times
Wear protective gloves. The guaranteed noise level
Be careful of fire Danger of hot components
Keep away from fire With this symbol the
manufacturer confirms that
this tool is in accordance with
applicable European
directives.
IMPORTANT
If warning label peel off or become soiled and impossible to read, you should contact the dealer from
which you purchased the product to order new labels and affix them in the required location(s).
WARNING
Never modify your product. We won't warrant the machine, if you use the remodeled brush cutter or
you don't observe the proper usage written in the manual.
4. For safe operation
-----------------------------------------------------------------------------------------------------------------------------------------
1. Read this manual carefully until you completely understand and
follow all safety and operating instructions.
2. Keep this manual handy so that you may refer to it later
whenever any questions arise. Also note, if you have any questions
which cannot be answered herein, contact the dealer from whom
you purchased the product.
3. Always be sure to include this manual when selling, lending, or
otherwise transferring the ownership of this product.
4. Never allow children or anyone unable to fully understand the
directions given in the manual to use the machine.
■WORKING CONDITION
1. When using the product, you should wear proper clothing and
protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools and files
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working area (rope, warning signs)
(5) Whistle (for collaboration or emergency)
(6) Hatchet or saw (for removal of obstacles)
3. Do not wear loose clothing, jewelry, short trousers, sandals, or
go barefoot. Do not wear anything which might be caught by a
moving part of the unit. Secure hair so it is above shoulder length.
■WORKING CIRCUMSTANCE
1. Never start the engine inside a closed room or building. Exhaust
gases contain dangerous carbon monoxide.
2. Never use the product,
a. when the ground is slippery or when you can’t maintain a
steady posture.
b. At night, at times of heavy fog, or at any other times when
your field of vision might be limited and it would be difficult to gain
a clear view of the working area.
c. During rain storms, during lightning storms, at times of strong
or gale-force winds, or at any other times when weather conditions
might make it unsafe to use the product.
■WORKING PLAN
1. You should never use the product when under the influence of
alcohol, when suffering from exhaustion or lack of sleep, when
suffering from drowsiness as a result of having taken cold medicine
or at any other time when a possibility exists that your judgment
might be impaired or that you might not be able to operate the
product properly and in a safe manner.
2. When planning your work schedule, allow plenty of time to rest.
Limit the amount of time over which the product is to be used
continuously to somewhere around 30~40 minutes per session,
and take 10~20 minutes of rest between work sessions. Also try to
keep the total amount of work performed in a single day under 2
hours or less.
WARNING
1. If you don’t observe the working time, or working manner
(See ■USING THE PRODUCT), Repetitive Stress Injury (RSI)
could occur. If you feel discomfort, redness and swelling of
your fingers or any other part of your body, see a doctor
before getting worse.
2. To avoid noise complaints, in general, operate product
between 8a.m. and 5p.m. on weekdays and 9a.m. to 5p.m.
weekends.
NOTE
Check and follow the local regulations as to sound level and hours
of operations for the product.
■BEFORE STARTING THE ENGINE
1. The area within a perimeter of 50 feet (15m) of the person using
the product should be considered a hazardous area into which no
one should enter. If necessary, yellow warning rope, warning signs
should be placed around the perimeter of the area. When work is
to be performed simultaneously by two or more persons, care
should also be taken to constantly look around or otherwise check
for the presence and locations of other people working so as to
maintain a distance between each person sufficient to ensure
safety.
2. Check the condition of working area to avoid any accident by
hitting hidden obstacles such as stumps, stones, cans, or broken
grass.
IMPORTANT
Remove any obstacle before beginning work.
■STARTING THE ENGINE
1. Keep bystanders and animals at least 50feet (15m) away from
the operating point. If you are approached, immediately stop the
engine.
2. The product is equipped with a centrifugal clutch mechanism, so
the cutting attachment begins to rotate as soon as the engine is
started by putting the throttle into the start position. When starting
the engine, place the product onto the ground in a flat clear area
and hold it firmly in place so as to ensure that neither the cutting
part nor the throttle come into contact with any obstacle when the
engine starts.
WARNING
Never place the throttle into the high speed position when
starting the engine.
3. After starting the engine, check to make sure that the cutting
attachment stops rotating when the throttle is moved fully back to
its original position. If it continues to rotate even after the throttle
has been moved fully back, turn off the engine and take the unit to
your authorized servicing dealer for repair.
■USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the manufacturer. And use
only for tasks explained in the manual.
1. Grip the handles firmly with both hands using your whole hand.
Place your feet slightly apart (slightly further apart than the width
of your shoulders) so that your weight is distributed evenly across
both legs, and always be sure to maintain a steady, even posture
while working.
2. Maintain the speed of the engine at the level required to
perform cutting work, and never raise the speed of the engine
above the level necessary.
3. If the unit start to shake or vibrate, turn off the engine and check
the whole unit. Do not use it until the trouble has been properly
corrected.
4. Keep all parts of your body away from rotating cutting
attachment and hot surfaces.
5. Never touch the muffler, spark plug, or other metallic parts of
the engine while the engine is in operation or immediately after
shutting down the engine. Doing so could result in serious burns or
electrical shock.
• IF SOMEONE COMES
1. Guard against hazardous situations at all times. Warn adults to
keep pets and children away from the area. Be careful if you are
approached. Injury may result from flying debris.
2. If someone calls out or otherwise interrupts you while working,
always be sure to turn off the engine before turning around.
■MAINTENANCE
1. In order to maintain your product in proper working order,
perform the maintenance and checking operations described in the
manual at regular intervals.
2. Always be sure to turn off the engine before performing any
maintenance or checking procedures.
WARNING
The metallic parts reach high temperatures immediately after
stopping the engine.
■TRANSPORTATION
1. When hand-carrying the product, cover over the cutting part if
necessary, lift up the product and carry it paying attention to the
blade.
2. Never transport the product over rough roads over long
distances by vehicle without removing all fuel from the fuel tank. If
doing so, fuel might leak from the tank during transport.
■HANDLING FUEL
1. The engine of the product is designed to run on a mixed fuel
which contains highly flammable gasoline. Never store cans of fuel
or refill the tank of the unit in any place where there is a boiler,
stove, wood fire, electrical sparks, welding sparks, or any other
source of heat or fire which might ignite the fuel.
2. Never smoke while operating the unit or refilling its fuel tank.
3. When refilling the tank, always turn off the engine and allow it to
cool down. Take a careful look around to make sure that there are
no sparks or open flames anywhere nearby before refueling.
4. Wipe spilled fuel completely using a dry rag if any fuel spillage
occurs during refueling.
5. After refueling, screw the fuel cap back tightly onto the fuel tank
and then carry the unit to a spot 10feet (3m) or more away from
where it was refueled before turning on the engine.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Recortadora de TitanTec
