INTENDED USE
The device is designed to be used in sanitary environments for the purpose of sterilizing non-heat sensitive
medical and surgical instruments. The process of disinfection is based exclusively on the thermal destruction of
the microorganisms present upon the instruments at a typical temperature of about 180º C.
Effectively reaching a steril state for the instruments inserted into the sterilizers depends upon multiple factors:
•
The level of initial contamination of the instruments (total bacterial load);
•
The type of contaminating microorganisms;
•
The permeability of all the contaminated instrument parts by the hot air produced by the sterilizer.
For more information see the paragraph **attention** ahead.
The device must be used only and exclusively by qualified personel.
INDEX
Pos. 1 Thermoregulator internal temperature 50 ÷210° C Pos. 6 Warning light “resistances”
Pos. 2 Programming Timer 2 hours or Manual Pos. 7 Ventilation motor fan (inside)
Pos. 3 Thermometer indicating internal temperature 0 ÷200° C Pos. 8 Closure with key
Pos. 4 Connection plug with fuses Pos. 9 Silicone gasket
Pos. 5 Warning light “timer” or “manual” connected Pos. 10 Security thermostat 260° C
SYMBOLS AND SAFETY WARNINGS
WARRANTY CONDITIONS
1) The device is warranted for a period of one year from date of purchase.
2) Warranty covers the substitution or repairs free-of-charge of components with
manufacturing defects.
3) The device will be repaired only at our factory. Charges, risks arising from the
transport of the device shall be on purchaser’s account.
4) In the event of repairs at purchaser’s home, purchaser shall be charged fixed call costs
covering partial reimbursement of travel and professional visit by personnel.
5) Warranty coverage excludes: internal lighting, damages caused by carelessness of
purchaser, incorrect and improper uses and installations not conforming to warnings,
indicated in these booklet instructions or in any case results from phenomenon
unrelated to the normal working of the device.
6) The warranty expires when the device is tampered with or repaired by unauthorised
personnel.
7) It is excluded the substitution and the extension of the warranty following a
breakdown.
8) It is excluded any compensation for damages direct or indirect of any nature to persons
or objects arising from use or suspension of use of the device.
9) The warranty expires immediately if the relative certificate shows alterations, erasing,
or it’s not issued or convalidated by us. The certificate must accompany the device, or
handed to maintenance personnel for home-repairs.
The manufacturing company Titanox S.r.l. is responsible for the safety, reliability and
performance of the device if:
−the assembly, the additions, the re-setting, the modification or repairs are carried out
by personnel of Titanox S.r.l.;
−the electrical system to which it is connected conforms to safety norms in country of
installation;
−the device is used in conformity to instructions of use and maintenance.
This liability expires immediately when the device is tampered with or repaired by
unauthorised personal.
For any further requirements of spare parts, repairs or checks, it’s necessary contact
directly the manufacturer: TITANOX S.r.l. - Via Canove 2/A – Loc. Canove de’
Biazzi – 26038 Torre de’ Picenardi (CR) – Italia - Tel. (0039) 0375 394065 – Fax
(0039) 0375 394067 communicating the registration number of the device to repair.
1
6
