Titan TTB924DBT Manual de usuario

Original Instructions_MNL_TTB924DBT_GB_V1_220421

TTB924DBT

350W Drill Press

CAUTION: Read the instructions before using the product.

V10422 / BX220IM

EAN: 5059340397627

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 1MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 1 2022/4/21 2:54 PM2022/4/21 2:54 PM

In more detail...

Product functions

Operation

Care and maintenance

Troubleshooting

Recycling and disposal

Guarantee

Declaration of conformity

Getting started...

Safety information

Your product

Before you start

These instructions are for your safety. Please read through them

thoroughly before use and retain them for future reference.

Let’s

get started...

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 2MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 2 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

Safety warnings

General power tool safety warnings

WARNING! Read all safety warnings, instructions,

illustrations and specications provided with this

power tool. Failure to follow all instructions listed

below may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk

of electric shock.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 3MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 3 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

Safety warnings

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Donotexposepowertoolstorainorwetconditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 4MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 4 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch

on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 5MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 5 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

Safety warnings

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect

the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 6MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 6 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

5) Service

a) Have your power tools serviced by a qualied

repair person using only identical replacement

parts. This will ensure that safety of the power tool is

maintained.

Safety instructions for drill press

a) The drill must be secured. A drill that is not properly

secured may move or tip over and may result in

personal injury.

b) The workpiece must be clamped or secured to the

workpiece support. Do not drill pieces that are too

small to be clamped securely. Holding the workpiece

by hand during operation may result in personal injury.

c) Do not wear gloves. Gloves may be entangled by the

rotating parts or chips leading to personal injury.

d) Keep your hands out of the drilling area while the

tool is running. Contact with rotating parts or chips

may result in personal injury.

e) Make sure the accessory is rotating before feeding

into the workpiece. Otherwise the accessory may

become jammed in the workpiece causing unexpected

movement of the workpiece and personal injury.

f) When the accessory is jammed, stop applying

downward pressure and switch off the tool.

Investigate and take corrective actions to eliminate

the cause of the jam. Jamming can cause unexpected

movement of the workpiece and personal injury.

g) Avoid generating long chips by regularly

interrupting downward pressure. Sharp metal chips

may cause entanglement and personal injuries.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 7MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 7 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Safety information

Getting started...

Safety warnings

h) Never remove chips from the drilling area while

the tool is running. To remove chips, move the

accessory away from the workpiece, switch off the

tool and wait for the accessory to stop moving.

Use tools such as a brush or hook to remove

chips. Contact with rotating parts or chips may result

in personal injury.

i) Accessories with speed ratings must be rated at

least equal to the maximum speed marked on the

power tool. Accessories running faster than their

rated speed can break and y apart.

Additional safety warnings for drill press

a) Keep bits clean and sharp. Sharp bits minimize

stalling. Dirty and dull bits may cause misalignment of

the material and possible operator injury.

b) Never use excessive force on the handle.

c) Always ensure the product is securely mounted to a

solid workbench.

d) Never remove the guard.

e) Adjust the table or depth stop to avoid drilling into the

table. Shut off the power, remove the drill bit, and clean

the table before leaving the product.

f) Never perform any operation by moving the head

or table with respect to one another. Do not turn the

motor switch on or start any operation before checking

that the head and table support lock handle is clamped

tight to column and head and table support collars are

correctly positioned.

g) Before engaging the power switch, make sure the belt

guard is down and the chuck is installed properly.

h) Do not perform layout, assembly, or set-up work on

the table while the cutting tool is rotating, switched on,

or connected to a power source.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 8MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 8 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

i) If the power supply cord is damaged, it must be

replaced only by the manufacturer or by an authorised

service centre to avoid risk.

j) Care should be taken when drilling brass and copper

as drill may jam and break if too much pressure is

applied.

The following information applies to professional

users only but is good practice for all users:

ADDITIONAL SAFETY WARNING FOR

CONSTRUCTION DUST

The updated Control of Substances Hazardous to Health

Regulations 1st October 2012 now also targets to reduce

the risks associated with silica, wood and gypsum dusts.

Construction workers are one of the at- risk groups within

this because of the dust that they breathe: silica dust is

not just a nuisance; it is a real risk to your lungs!

Silica is a natural mineral present in large amounts

in things like sand, sandstone and granite. It is also

commonly found in many construction materials such as

concrete and mortar. The silica is broken into very ne

dust (also known as Respirable Crystalline Silica or RCS)

during many common tasks such as cutting, drilling and

grinding. Breathing in very ne particles of crystalline

silica can lead to the development of:

• Lung cancer

• Silicosis

• Chronic Obstructive Pulmonary Disorder / Chronic

obstructive pulmonary disease (COPD)

And breathing in ne particles of wood dust can lead to

the development of Asthma. The risk of lung disease is

linked to people who regularly breathe construction dust

over a period of time, not on the odd occasion.

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 9MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 9 2022/4/21 2:54 PM2022/4/21 2:54 PM

TTB924DBT by TITAN

Getting started...

Safety information

Safety warnings

To protect the lung, the COSHH Regulations sets a limit

on the amount of these dusts that you can breathe (called

a Workplace Exposure Limit or WEL) when averaged

over a normal working day. These limits are not a large

amount of dust: when compared to a penny it is tiny – like

a small pinch of salt:

This limit is the legal maximum; the most you can breathe

after the right controls have been used.

HOW TO REDUCE THE AMOUNT OF DUST?

a) Reduce the amount of cutting by using the best sizes

of building products.

b) Use a less powerful tool e.g. a block cutter instead of

angle grinder.

c) Using a different method of work altogether – e.g.

using a nail gun to direct fasten cable trays instead of

drilling holes rst.

Please always work with approved safety equipment,

such as those dust masks that specially designed to lter

out microscopic particles and use the dust extraction

facility at all time.

For more information please see the HSE website:

http://www.hse.gov.uk/construction or http://www.hse.gov.

uk/pubns/cis69.pdf

MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 10MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 10 2022/4/21 2:54 PM2022/4/21 2:54 PM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Titan

Titan

Titan SF1022 Manual de instalación

Titan

Titan TTB284HTG Manual de instalación

Titan

Titan TTB285JSW Manual de usuario

Titan

Titan TTI866JSW Manual de usuario

Titan

Titan Pro V55 Manual de usuario

Titan

Titan TT5MTP26-2 Manual de usuario

Titan

Titan CAPSpray 0524000 Manual de usuario

Titan

Titan TTB883ROU Manual de usuario

Titan

Titan 51886 Manual de usuario

Titan

Titan PR 33 Manual de usuario

Titan

Titan TS005V2 Manual de usuario

Titan

Titan LX-70 Manual de usuario

Titan

Titan TT5MTP33BP-2 Manual de usuario

Titan

Titan TTB280DRH Manual de instalación

Titan

Titan SF2843 Manual de instalación

Titan

Titan TTI913TOR Manual de usuario

Titan

Titan TTB773HTG Manual de usuario

Titan

Titan TTK587GD0 Manual de instalación

Titan

Titan TTB591ROU Manual de instalación

Titan

Titan TTB935HTG Manual de usuario

Titan

Titan SF1500XP Manual de instalación

Titan

Titan SF800XPL Manual de instalación

Titan

Titan EHS Manual de usuario

Titan

Titan TM45FG Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual