3 V20200504A
5. Remove the backing from the copper coloured earth sheet / ground plane, then stick it
onto the A Pillar of the vehicle. You do not have to scrape away any paint from the metal of
the A Pillar, simply stick the earth sheet to the painted metal pillar.
6. Connect the signal cable to the DAB Receiver.
7. Insert the power cable into the socket on the side of the DAB Receiver, then tuck the
excess aerial cable into the recess between your windscreen and the passenger a-pillar.
Correct disposal of this product
This marking indicates that this product should not be disposed with other
household waste throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection system or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
