WARNINGS:
Note: TIFATECH Co., Ltd declines all responsibility for damage to
persons or property resulting from failure to follow the instructions and warning
listed below when installing and using this board.
Ensure every part of the machine including actuators and sensors is working
properly before replacing the new control board.
Ensure that the power supply voltage does not fluctuate by more than 6%.
Before mounting or removing the control board, disconnect it from the power
supply and wait a while for it to cool down.
Do not remove any original electrical part of the board.
Repairing, cleaning, or parts replacement should only be performed by
TIFATECH or other qualified service personnel.
Children should never be allowed to play with the board.
This board is intended to only use for the espresso coffee machine control
board. Do not use it for any other purpose.
PRECAUTIONS
Installation precautions
Read thoroughly the following conditions before installing the HTCCA board
to the coffee machine.
The mounting location must be:
No flammable, explosive gases
No exposure to water.
An ambient temperature of 0 to 70⁰C that does not change rapidly, and
no icing.
An ambient non-condensing humidity of 35 to 85 %RH.
Operation and Maintenance Precautions
Do not touch live terminals. This may cause an electrical shock or
problems in operation.
