Introduction
This manual provides installation instructions for the Boost and Infinity 2.0 LED light bars for under canopy
lighting. Instructions are provided for large scale permanent installations as well as temporary test/trial
installations. Please contact customer support with any questions not covered in this guide.
Equipment - Permanent Installation
Required Equipment
•LED Light Bars, Thrive Agritech part number BST-130W-FS2 (recommended) or TBAR-65W-FS2
•Slide & Lock Clips, Thrive Agritech part number SLCLIP, Quantity 2 for each light bar
•Interconnection Clips, Thrive Agritech part number INCLIP-BD, Quantity 1 for each light bar
•Power Cables, Thrive Agritech, several lengths and connector options to choose from
•1.5” x ¼in.-20 bolts & matching nuts, 2 sets for each light bar
•Adjustable trellis mounting structure with steel or aluminum square tubing
oRecommended supplier: Innovative Growers Equipment
(https://www.innovativegrowersequipment.com/plant-support-system-trellis)
oAlternate source of square tubing: Unistrut (https://www.unistrut.us/products/telestrut-
system/telestrut-products)
Equipment - Temporary Test Installation
Required Equipment
•LED Light Bars, Thrive Agritech part number BST-130W-FS2 (recommended) or TBAR-65W-FS2
•Power Cables (Thrive Agritech), several lengths and connector options to choose from
•Interconnection Clips, Thrive Agritech part number INCLIP-BD, Quantity 1 for each light bar
•Structure to support the light bars
oRecommended support: 4”-8” container pot
Optional Equipment
•Unistrut square tubing (https://www.unistrut.us/products/telestrut-system/telestrut-products)
•Slide & Lock Clips (Thrive Agritech)
•¼”-20 bolts & matching nuts, 2 sets for each light bar