Thorsis Technologies isDNet USB Manual de usuario
isDNet USB
User Manual
isDNet USB
Content
1 Hardware Installation .......................................................................3
1.1 Introduction ...................................................................................3
1.2 PC Connection...............................................................................4
1.2.1 System Requirements ..........................................................4
1.2.2 Delivery Contents ..................................................................4
1.2.3 Technical Data.........................................................................5
1.2.4 Installation................................................................................6
1.2.5 Connector pin assignment ................................................9
2 Software Installation and Conguration ................................ 10
2.1 Software Installation ................................................................ 10
2.2 Installed Files............................................................................... 12
2.3 Conguration Software........................................................... 13
2.3.1 Add a Device......................................................................... 14
2.3.2 Remove a Device................................................................. 15
2.4 Test Software............................................................................... 16
3
isDNet USB
1 Hardware Installation
1.1 Introduction
The Interface is DNet USB provides a communication link between a desktop
computer or PC notebook and a Device Network. The PC can be connected with
the Device Network using the USB plug & play features. Real time data of the
eld devices are available for operational areas, e.g. mobile data aquisition and
parameterization.
The interface is not dependent on external power supplies. The prozessor and its
periphery are powered by the USB bus. The transceiver is galvanic decoupled, its
supply results from the DeviceNet Bus.
The interface supports the DeviceNet Standard Version 2.0. Its connector cable
comes with a 5-pin connector. The DeviceNet Stack works alternative or in paral-
lel as Master (and IO scanner) or Slave. The scanner allows a dynamic change of
the slave list, which means while the DeviceNet is working slave devices can
be added to or eliminated from the scan list. The cyclic time of the the scan can
be set as required by the system. The„Explicit Massaging“ funcionality is per-
formed employing asynchronous command and event queues. Thus any data
lengths can be transmitted.
4
isDNet USB
1.2 PC Connection
1.2.1 System Requirements
To connect the is DNet USB interface with your computer an available USB port is required. The PC
must be equipped with a x86-prozessor. Operating systems Windows 98, ME, 2000 and XP are sup
ported.
Restart your computer after installation!
1.2.2 Delivery Contents
The interface is DNet USB is delivered with an user manual (English/German) and the driver and con-
guration software on CD. The latest driver you can download any time from our homepage.
5
isDNet USB
1.2.3 Technical Data
Hardware DeviceNet USB 2.0
Connector COMBICON 5-polig CY7C68014A
Transmission speed 125 kbit/s, 250 kbit/s,
500 kbit/s
Full Speed: 12 Mbit/s High
Speed: 480 Mbit/s
Asic SJA1000
Operation up to 16 devices in parallel
Interface DLL
Operating systems Windows 98, ME, 2000, XP, Vista, 7
6
isDNet USB
2.2.4 Installation
Steps of Installation
1. Driver installation The driver software has to be installed before the hardware installation.
Otherwise the operating system can’t nd the respective driver.
2. Interface installation
3. Conguration
The Interface can be connected to the CAN/CANopen network with its D-Sub 9 pin connector directly. The USB
cable connects the interface with the PC/notebook.
7
isDNet USB
Two LEDs indicate the actual operation mode.
The Module Status LED (MS) displays the status of the device.
LED meaning
off device is not in use
green normal operating status
red/green ashing self test is being completed
red error, device can be out of order
8
isDNet USB
LED meaning
off device is ofine
green ashing online, no connections are active
green online, there is at least one connection
red ashing at least one connection is at timed-out
status
red MAC-ID-conict or connection to the bus is
being disturbed
The network status (NS) LED gives information about the status of the communication.
At beginning of the initialisation both LEDs are running through all their possible states of lightning
(MS=green, MS=red, NS=green, MS= red). This allows to check the LEDs funcionality.
9
isDNet USB
The contacts of the 3-pin COMBICON-connector have following meanings:
2.2.5 Connector pin assignment
10
isDNet USB
The driver software has to be installed before the hardware installation. Otherwise the operationg system can’t
nd the respective driver.
The driver software package isDNet Multidriver contains a Dynamic Link Library (DLL) which allows the access
to the DNet rmware under the operating systems Windows 98, ME, NT4.0, 2000 and XP. The actual operating
system is detected automatically by the driver DLL.
The conguration of the interface can be done fast and easily with the conguration software is DNet Driver
Congurator which is installed into the ifak system directory of the Start Menu.
The installation follows the steps mentioned below:
•LoginasadministratorundertheoperatingsystemsWindows2000andXP.
•InserttheinstallationCD-ROMintoyourCDdrive.
•Thesetupstartswithanautoroutine;proceedaccordingtotheinstructionsdisplayedonthescreen.
•Thesoftwareisinstalledinthedefaultprogramdirectoryofyourcomputerunderthesubdirectory
c:\Programme\ifak system\is DNet Multidriver \
2 Software Installation and Conguration
2.1 Software Installation
Otros manuales para isDNet USB
1
Tabla de contenidos
Manuales populares de Equipo de grabación de otras marcas
Strymon
Strymon NIGHTSKY Manual de usuario
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario
Tews Technologies
Tews Technologies TPMC465 Manual de usuario
Honeywell
Honeywell Excel 50 Manual de usuario
SeaLevel
SeaLevel COMM+8.LPCI Manual de usuario
Arturia
Arturia AUDIOFUSE STUDIO Manual de usuario
