THOR T35106SKW Manual de usuario

6 kg Washing Machine
T35106SKW
1

Features……………………………………………………………………………………
.…………….. 3
Safety Instructions........................................................................................ 4
Electrical Requirements
…………………………………………………………….…….………. 5
Installation.................................................................................................... 6
Connecting to Water Supply …………………..................................................... 7
Before First Use
…………………………………………………………..…………………………… 9
Control Panel
……………………………………………………………………………….………… 10
Detergent and Softener
…………………………………………………………………….…... 12
Using your Washing Machine
………………………………………………………………... 13
Cleaning and Care……………….......................................................................
14
2

Moving your Washing Machine / Top Tips ……………………...........................
15
Problem solving .......................................................................................... 16
Technical data ............................................................................................. 17
Health and Safety ....................................................................................... 18
Warranty Information................................................................................. 19
Customer Care
……………………………………………………………….………..……………. 21
3

The use of any electrical appliance requires the following common sense
safety rules. There is danger of injury or death to the person and damage to
the appliance.
4

Note: If the following instructions are not adhered to the warranty
will not be applicable
●This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities unless there is a
person responsible for their safety present
●This appliance is only intended to wash items which are specified by
the manufacturer to be machine washable on the label
●In the event of a power outage, the programme will resume when
power is restored
●Have an electrician connect the appliance to a grounded outlet
protected by a fuse
●Ensure that the water supply and draining hoses are securely
fastened to avoid any water leakage
●Never open the loading door or remove the filter while there is still
water in the drum
●Never force the loading door open, it will automatically release at the
end of its cycle
●To protect against the risk of electric shock Never immerse the
appliance body in water or any other liquid and ensure the electrical
connections are kept dry. Never hose the appliance down
●Use washing machine detergents and softeners only
●Ensure that appliance is unplugged during installation, maintenance,
cleaning and repairs
●This appliance is intended to be used in household and residential
type environments, it is not suitable for commercial use
●Keep children away from the appliance while in use and store
detergent and softener out of reach
●Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must be A.C.
(Alternating Current)
5

●If the socket outlets in your home are not suitable for the plug
supplied with this appliance, the plug should be removed and the
appropriate one fitted
●Should the fuse in the 13 amp plug require changing, a 5 amp BS1362
must be fitted
●Do not connect your Washing Machine to the mains electricity supply
using an extension lead.
Warning:
The plug removed from the mains lead, if severed, must be destroyed
as a plug with a bared flexible cord is hazardous if engaged into a
live socket outlet
Warning:
This appliance must be earthed
●Use an authorised agent to install this appliance ensuring water and
electricity source are in place prior to installation
●Remove all the packing including the foam base
6

●Dispose all the packaging safely and keep out of the reach of children
●It is normal that water drops may appear on the plastic and the door
glass as a result of the manufacturers testing process
●Before installing your washing machine, check for any external visible
damage. Do not install or use your washing machine if it is damaged
●Ensure that the water inlet, hoses or power cable are not damaged
while pushing the product into its place after installation or cleaning
●This appliance must be installed on a flat surface
●Never place your washing machine on carpet
●Don’t install washing machine in an area that may be damp
●Don’t install washing machine in direct sunlight
●Ensure that the surrounding temperature of the appliance will not
drop below 0 °C
●Tilt the appliance gently backwards to remove packaging
●Remove the four transit bolts and the rubber washers from the back
of the machine by turning anti-clockwise with a suitable spanner. Pull
out the remaining plastic section of each transit bolt and insert the
blanking caps
●The distance between the machine and the wall should be 10cm
●To level the machine, use a spanner to turn the locknuts in a clockwise
direction. Then turn the locknuts together and adjust feet to unscrew.
Use a spirit level to check that the machine is level. Hold the
Adjustable feet securely with a pipe wrench. Turn the locknut again
Using the spanner until it sits firmly up against the housing
Levelling Continued -
7

Drain Hose Connection Directly to a Sink
●If the outlet spigot has not been used before, remove any blanking
plug that may be in place
●Push the drain hose onto the spigot and secure with a clip if required,
Ensure that a loop is formed in the drain hose to prevent waste from
the sink entering the washing machine. If required, the drain hose can
be extended to a length of 4 m
Connecting Directly to a Standpipe
●Firstly form a hook in the end of the drain hose using the “U” piece”
Supplied
●Place the drain hose into your standpipe, which should have an
internal diameter of approximately 38mm ensuring there is an air
break between the drain hose and the standpipe
●When discharging into a standpipe ensure that the top of the
standpipe is no more than 90cm and no less than 60cm above floor
level
8

Water Inlet Connection
●Connect the inlet hose supplied with the machine to a tap with a 3/4”
thread. Installation should comply with local water authority and
building regulations’ requirements.
●Connect a water supply to the inlet valve at the back of the machine.
Follow the indication of the picture that follows to complete the
connection
Warning:
Your house will be flooded if the hose comes out of its housing during
water discharge. There is a risk of scalding due to high washing
temperatures. Ensure that you fix the end of the discharge hose tightly
so that it cannot come out.
9

Do NOT connect your appliance to the electricity supply until all packing and
transit protectors have been removed.
Before laundering clothes, perform a cotton cycle using detergent in main
wash section of drawer.
1. On /Off Button
Press this button to turn power on / off. When Wash Programme
Finished press Power button to cut power off.
2. Start / Pause Button
Press this button to Start operating, Press it to also pause during
operation press again to continue.
3. Pre Wash Button
Press this button if clothes are extra dirty, you can choose this
programme before washing.
4. Delay button
Press this button to set the delay time of a wash cycle from 3 hours to
18 hours
5. Programme Knob
Turn this knob clockwise or anticlockwise to select the required wash
program. Once the “Start/Pause” button is pressed and the machine is
10
Otros manuales de Arandela de THOR


















