THOMSON CR300IVCA Guía del usuario

SMARTAUDIO

CR300IVCA

Last update: March 15, 2020

Application Instruction Manual

CR300IVCA – Application Instruction Manual

Connecting your speaker to the network

Connecting with the Smartaudio app

Search for the Smartaudio app in Google Play Store (Android)

Or Apple APP Store (iOS). Download and install.

Also ensure that you have also installed the official Amazon Alexa app.

Power up your speaker and wait for the sound to advise that you

are in set up mode.

You will hear three beeps and the light ring will flash in white

and blue colour. Launch the app so it can search for the new

speaker. Press the ‘Add Device’ button to confirm that you wish to

add a new speaker. Click on the device list and select the

CR300IVCA from the device list and select ‘Connect Speaker.

CR300IVCA – Application Instruction Manual

The app will direct you to go to the Wi-Fi settings page. Go

to the Wi-Fi settings on your phone and connect your mobile

phone to the speaker. Look for the Wi-Fi name

CR300IVCA_XXXX

Note that it is best to have your speaker close to your router

during this part to ensure a good Wi-Fi signal.

Once you are connected, the speaker will beep twice and

flash an amber colour. You and you can return to the app to

continue set up.

Select your home Wi-Fi network and enter the correct

password for your Wi-Fi.

If connection is successful, the speaker will beep and the

light will turn green to indicate you that it is connected to

your network. It will also show you the signal strength from

your router to your speaker. Press ‘Next’ to complete set

up.

CR300IVCA – Application Instruction Manual

NOTE

Once the speaker is successfully connected, its SSID (Wi-Fi name) will be

automatically hidden for network security. If you would like the speaker to

release its SSID and be visible again for a new set up, press and hold the Wi-

Fi \ BT button until the speaker beeps and the light ring flashes white again.

You can then re-name your speaker or name it according to the room it is

located in, i.e. Kitchen speaker or Bedroom speaker. Once named, press

the icon in the top right to go to the Alexa account set up page.

Keep it simple as this name will be used to identify the speaker later when

using voice commands.

CR300IVCA – Application Instruction Manual

You need to have an active Amazon

account to use the Alexa service, so if you

do not already have an account you will

need to sign up. If you have an account,

just follow the onscreen instructions to link

your speaker to your account. Ensure that

you enter your usual Amazon account

email address and password and select

your preferred language.

Note: You will also need to install the Alexa app to

enable certain services, so please ensure that you

also install this on the same mobile device.

If at any time you wish to disable the

listening microphone you simply press

the button indicated on the next app

screen. Press Next to continue.

Once you have completed the set-up,

your speaker will appear in the device

list of your app. From here you can see

all of the Smartaudio speakers

connected to your network.

CR300IVCA – Application Instruction Manual

The apps Main Interface

Select here to enter the speaker settings

Control the volume level with the slider control

Press the LR button if you have 2 speakers and wish to split them to left and right channels

If you wish to add another Smartaudio speaker to your network, press the + icon in the top right

corner.

Rename your speaker

Check the full connection details and speaker info

Set an alarm

Select your pre-sets

Adjust your Alexa settings

CR300IVCA – Application Instruction Manual

Now simply press the ‘SMARTAUDIO’ text in the top left corner and keep pressing the back arrow to navigate back to the main

Device list of your app. Then sweep right to reveal the music player screen of your app.

Swipe right again to access your music sources including

local stored music and your favourite streaming services.

Select My music to play music from your device or local

network

Select Tune in for Internet Radio

Select Spotify, Deezer, etc for streaming from your

preferred streaming service.

CR300IVCA – Application Instruction Manual

Setting the language for prompts

Once you have connected your speaker and you are familiar with app, you can change your language for voice prompts. This will

give you information about the different modes and any issues that may occur during operation.

If you do not wish to change your language you can skip this part.

To do this follow the instructions below.

1. Select the settings icon on the Device list screen.

2. Select ‘Speaker info’

3. Scroll down the page and select the ‘Audio prompts Language’ setting.

4. Then select your preferred language. All prompts and Alexa will now change to your preference.

CR300IVCA – Application Instruction Manual

Using Spotify

Use your phone, tablet or computer as a remote control for Spotify.

Go to spotify.com/connect to learn how

Using Deezer

A Deezer subscription is required to use Deezer on your device.

1. Head to deezer.com/offers and sign up to start your free trial*

2. Install the Deezer app on your device.

3. Launch the Smartaudio app and on the device list page, swipe right twice.

4. Select Deezer from the options list and input your login details to launch Deezer.

5. Select your music.

6. Select the Audio option at the bottom left of the app page and then select your speaker from the devices list and start listening.

You can also ask Alexa to play your favourite music directly from your chosen music streaming service.

To do this you need to follow these steps:

1. Open the Alexa app

2. Select the menu icon in the top left corner of the app page

3. Select settings

4. Select music

5. Select Link New Service

6. Select your music service from the list.

7. Input your account details.

Once confirmed you can then use your voice to request your favourite music. i.e. Alexa, Play jazz music on Deezer or Alexa, Play music by

Queen on Spotify.

CR300IVCA – Application Instruction Manual

Setting an Alarm

You can set an alarm within the app and also choose if you want to wake with your favourite radio station or a preset music track

from your streaming service.

Select the Alarm Clock setting from the list

Then press the + icon to add a new alarm.

Select the time for your alarm

Then chose if you wish to use radio station from Tune in or a favourite track from your

presets list. See below for how to set up a preset.

Otros manuales para CR300IVCA

Tabla de contenidos

Idiomas:

Otros manuales de Oradores de THOMSON

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario