Third Reality RealityAdapter Manual de usuario

RealityAdapter

rrr

Life can be Smarter than You Think!

What’s in the box

Features

1.Work with Amazon Alexa and Google Home

Assistant

2.No extra hub required

3.Snap! Zero wiring required

4.Wi-Fi and ZigBee connectivity



DC 4.0 Output Line*1



RealityAdapter*1

User Guide*1

Micro USB Output Line*1

DC 3.5 Output Line*1



Product configuration

ZigBee LED/Power LED/Wi-Fi LED

Three LED indicators are provided. LED indicators will

change accordingly with current RealityAdapter status.

Micro USB/DC（Power Input Port）

RealityAdapter comes with two kinds of power input port:

Micro USB and DC, choose one based on the power line

style of your existing Smart Speaker.

Power LED

WiFi LED

ZigBee LED

Micro USB

DC3.5



DC4.0



Power Output Port

Plug power output line into Power Output Port and it will

power the Smart Speaker.

Reset

Restart

To restart RealityAdapter, short press the Reset hole with

a small needle and Wi-Fi LED will slow blinking. After

RealityAdapter connects with Wi-Fi, Wi-Fi LED will be

lighting on.

(Smart Speaker connecting with RealityAdapter will not be

affected by the Restart process.)

Factory Reset

To restore factory setting, long press the Reset hole with

a small needle more than 5 seconds until the Wi-Fi LED

turns off. Then take out the small needle and wait a few

seconds，the Wi-Fi LED will become fast blinking later.

Attention:The Power Output Port is a proprietary port for the

accessory cables. Do not plug USB Type-C connector into it.

Power Output Port

Reset

Two ways to use RealityAdapter

A.Work with Smart Speaker

Control

To control ZigBee device through smart speaker

Installation

1.Plug the power adapter into RealityAdapter and then

into a power outlet.

2. Plug the accessory Micro USB or DC output line into

RealityAdapter and smart speaker according to the power

connector type of the smart speaker. Refer to the table

below for the detailed information.

Attention:The power input line A and power output line

B have to be the same type: either Micro USBs or DCs .

Power Port Use Case:

B.Work as a standalone ZigBee Hub

Control

1.To control ZigBee device through ThirdReality App

Smart Speaker

Power Port

Echo original

DC3.5

Echo Second

Generation

DC3.5

Echo Dot

USB

Echo Dot 2

USB

Google Home

DC3.5

Google Mini

USB

Echo Spot

DC4.0

2.To control ZigBee device through smart speaker like

Echo Show or Google Home Max

Installation

Plug the power adapter into RealityAdapter and then into

a power outlet.

Instruction

1. After RealityAdapter is powered on, Power LED and

ZigBee LED will be lighting on and Wi-Fi LED will be

fast blinking.

2. Download ThirdReality App on your smart phone or

tablet, register or log into the App. ThirdReality App is

free and available on both App Store and Google Play.

Attention: RealityAdapter

does not include a power

adapter, you may need to

purchase a 5V/1A power

adapter separately.

3.To add RealityAdapter to your app, please tap “+ New

device” and select the “Adapter” category, then follow

the instructions on App. The RealityAdapter icon will be

showed on the App when pairing complete.

4. To add device, please tap “+ New device” and select

the category of the device. You will need to have a

RealityAdapter pairs with App before this step. Then

follow the instructions on App. The Device icon will be

showed on the App when pairing complete.

Pairing – Power LED and ZigBee

LED constant on; Wi-Fi LED fast

blinking

Pair completed – Power LED,

ZigBee LED and Wi-Fi LED

constant on

Pair failed – Power LED and

ZigBee LED constant on; Wi-Fi

LED slow blinking for 30 seconds

then become fast blinking. Please

try to repair RealityAdapter with

App.

Pairing – Power LED and

Wi-Fi LED lighting on; ZigBee

LED slow blinking

Normal Working – Power

LED, ZigBee LED and Wi-Fi

LED lighting on

5. If you use RealityAdapter with Amazon Alexa or

Google Home Assistant, please enable the ThirdReality

Smart Home Skills at Amazon Alexa or connect your

account with Google Home to get authorized access.

Status Indication

Power LED

ON - Power on

OFF - Power off

Wi-Fi LED

Fast Blinking - Wait for connecting Wi-Fi

Slow Blinking - Error, unable to connect to Wi-Fi

ON - Connected with Wi-Fi

ZigBee LED

Fast Blinking - System updating

Slow Blinking - Pairing new device

ON - Normal working condition

Troubleshooting

1.Adapter is unable to connect to Wi-Fi,

Wi-Fi LED slow blinking

Please check the status of your network and the router

Please scroll down the App page to refresh Adapter

status

If there is no problem with network, please try to restart

the Adapter.

2.Unable to pair RealityAdapter with Third

Reality App

If RealityAdapter has been paired with other Third

Reality App account, enable to pair RealityAdapter with

your account, please factory reset the RealityAdapter

first.

3.Adapter is updating system, ZigBee LED

fast blinking

You will receive a notification when a system updating is

ready. In order to avoid information losing, please do not

disconnect power and Wi-Fi during the updating.

Tabla de contenidos

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario