IMPORTANT SAFETY INFORMATION
Environmental influences
Safety instructions for use
WARNING! Prohibition that the lens of the device immediate-
ly look towards at intense heat such as the sun or laser device.
The objective lens and eyepiece can have an influence on a
burning glass and damage the internal components, the
guarantee can not include damage caused via an incorrect
operation.
Environmental influences
Regulatory information
Check the power supply unit, cable and adapter for visible
damage before use.
Do not use any defective parts. Defective components
must be replaced.
Do not use the power supply unit in wet or humid environ-
ments.
Only use the original cable provided with the battery
charger.
Do not make any technical modifications.
For further information and safety instructions, please refer
to the User Manual provided. It is also available on our
website in the download center: www.thermeyetec.com.
This product and, if applicable, the supplied
accessories are marked with “CE” and comply
therefore with the applicable harmonized
European standards listed under the Radio
Equipment Directive 2014/53/EU, the EMC
Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
Handle the device and battery pack with care: rough
handling may damage the battery pack.
Do not expose the device to fire or high temperatures.
Only use the battery charger included in the delivery
package.
The battery capacity decreases when operated in a cold
ambient temperature. This is not a fault and occurs for
technical reasons.
Always store the device in its carrying bag in a dry, well-ven-
tilated space. For prolonged storage, remove the batteries.
Do not expose your device to extreme temperatures lower
than - 20°C and higher than + 50°C.
The product shall only be connected to a USB Type C
interface.
If the device has been damaged or the battery is defective,
send the device to our after-sales service for repair.
4
