Thermoline Scientific TD Series Manual de usuario
Ovens
User Manual & Setup Guide
Thermoline Scientic Equipment Pty. Ltd.
ABN 80 000 859 129
10-12 Ross Place
Wetherill Park, NSW 2164. Australia.
Phone: +61 2 9604 3911
email: [email protected]
www.thermoline.com.au
TD & TD-FM RANGE
Omron E5CC
1
Contents
General Information
4
Product Specications
5
Operating Environment
10
Drying Oven Operating Environment
10
Bench Top Location
10
Electrical Connections
11
Operating Environment Warnings
12
Setup
13
Unpacking
13
Moving
13
Castors
14
Drying Oven Location
15
Shelves
16
Inlet and Exhaust
17
Cleaning
18
Door Gasket
18
Port Hole
19
Start Up Procedure
20
Start Up Procedure
20
Loading
21
Omron User Guide
22
Display Symbols
22
Temperature Control
23
Sensor Calibration
23
BMS Output
24
Manual Reset Safety Thermostat
25
Troubleshooting
26
Technical and Repair Support
27
Warranty
28
2
Symbols Drying Oven User Manual By Thermoline Scientific
General
Warning Sign
Warning sign: signies a general warning, and indicates a risk to people specied by the supplementary sign
that if not avoided, may result in death or serious injury.
Flammable
Warning; Flammable: signies a ammable warning, and indicates a risk of ammable content as specied
by the supplementary sign that if not avoided, may result in a re by igniting ammable material.
Warning;
Electricity
Warning; Electricity: signies a electricity warning, and indicates a risk of contact with electricity as specied
by the supplementary sign that if not avoided, could result in injury.
Warning; Hot
Surface
Warning; Hot Surface: signies hot surface warning, and indicates a risk to people specied by the
supplementary sign that if not avoided, will result in contact with hot surface.
General
Prohibition Sign
General Prohibition: signies a prohibited action, indicates a risk to people specied by the supplementary
sign that if not avoided, will result in death or serious injury.
Do Not Expose
Outside
Do Not Expose Outside: signies prohibiting the exposure to direct sunlight, and indicates a raised
temperature due to sunlight or placement on hot surface can cause harmful damage to cabinet.
3
General Information Drying Oven User Manual By Thermoline Scientific
This user manual is intended for Thermoline's drying oven range. We recommend that you read this user manual the whole
way through before you start using the cabinet. Consider this manual as a part of the cabinet and an integral part to its
function. We recommend keeping it close and within easy access.
The Thermoline drying ovens 80F, 150F, 250F, 500F, 630F and
700F models are designed and manufactured to remove large
quantities of moisture from products and samples. Designed
to operate between ambient +10°C and 200°C, the Thermoline
drying oven offers an industry-standard in moisture removal.
Thermoline also offers specic macadamia models with a
reduced maximum temperature, a programmable controller
and extra shelves.
• Operating Temperature of Ambient +10°C to 200°C
• Operating Temperature of Ambient +10°C to 70°C for
macadamia models
The Thermoline range of ovens are set to function with specic
operating ranges. The optimum operating conditions will be
explained further in this manual.
4
Product Specifications Drying Oven User Manual By Thermoline Scientific
Dimensions
External TD-80F TD-150F TD-250F TD-500F TD-700F TD-630F
WxDxH (mm) 520x560x800 630x660x1010 630x660x1360 780x810x1680 780x810x1980 1450x860x1100
Note: Inlet and Exhaust ports extend the overall height of the ovens by approximately 40mm.
Internal
WxDxH (mm) 390x400x400 500x510x600 500x510x950 650x650x1200 650x650x1500 1300x690x650
Clearance TD-80F TD-150F TD-250F TD-500F TD-700F TD-630F
Front (mm) 520 630 780 725
Back (mm) 100
Sides (mm) 100
5
Technical Specifications
Dimensions
External TD-500FM TD-700FM
WxDxH (mm) 780x810x1680 780x810x1980
Note: Inlet and Exhaust ports extend the overall height of the ovens by approximately 40mm.
Internal
WxDxH (mm) 650x650x1200 650x650x1500
Clearance TD-500FM TD-700FM
Front (mm) 780
Back (mm) 100
Sides (mm) 100
6
Technical Specifications
Technical
Specification
TD-80F TD-150F TD-250F TD-500F TD-700F TD-630F
Temperature
Range
Ambient +10°C to 200°C
Temperature
Control Stability
+/- 0.1°C
Temperature
Uniformity
+/-2°C @ 100°C +/-4°C @ 100°C
Heater Power 1500 watts 3000 watts
Electrical 7A/230V 13A/230V (requires 15A supply)
Nominal Capacity 80L 150L 250L 500L 700L 630L
Porthole
Diameter
13mm
Weight 60kg 100kg 110kg 170kg 190kg 190kg
Technical Specification TD-500FM TD-700FM
Temperature Range Ambient +10°C to 70°C
Temperature Control Stability +/- 0.1°C
Temperature Uniformity +/-2°C @ 70°C (unloaded and vents closed)
Heater Power 1500W
Electrical Requirement 10A/230V
Nominal Capacity 500L 700L
Porthole Diameter 13mm
Weight 170kg 190kg
7
Technical Specifications
Features TD-80F TD-150F TD-250F TD-500F TD-700F TD-630F
Shelves (max @100mm
spacing)
2 (max 3) 3 (max 4) 4 (max 6) 5 (max 9) 6 (max 11) 3 levels
(max 4)
Lockable Castors Optional
✔ ✔ ✔ ✔ ✔
Internal Fan
✔ ✔ ✔ ✔ ✔ ✔
Omron E5CC
✔ ✔ ✔ ✔ ✔ ✔
Solid Door
✔ ✔ ✔ ✔ ✔ ✔
Fibreglass Insulation
✔ ✔ ✔ ✔ ✔ ✔
Safety
Over Temperature
Safety
✔ ✔ ✔ ✔ ✔ ✔
Over Current Protection
✔ ✔ ✔ ✔ ✔ ✔
Options
BMS Plug No volt contact closure plug and socket connection to a Building Management System
Additional Shelves Additional Stainless Steel shelves to suit
Heavy Duty Shelves Update to allow for higher loads on shelves (limits total number of shelves possible for use)
Door Locks Key lockable door locks
Customisable Port Hole Add additional stainless steel 13mm port holes or choose 50mm port holes
Programmable
Controller (MSP)
(E5CC-MSP) Upgraded Omron Controller features 256 ramp and/or dwell segments
Glassware Drying See TGD-range for oven models specic to drying of laboratory glassware
Natural Convection See TO-range for oven models without fan forced circulation
8
Technical Specifications
Features TD-500FM TD-700FM
Shelves 10 12
Lockable Castors
✔ ✔
Internal Fan
✔ ✔
Omron E5CC-T
✔ ✔
Solid Door
✔ ✔
Fibreglass Insulation
✔ ✔
Safety
Over Temperature Safety
✔ ✔
Over Current Protection
✔ ✔
Options
BMS Plug No volt contact closure plug and socket connection to a Building Management System
Door Locks Key lockable door locks
Customisable Port Hole Add additional stainless steel 13mm port holes or choose 50mm port holes
The controller is preset with the following program using the Ormon E5CC-T
48 hrs. at 38˚C
48 hrs. at 45˚C
48 hrs. at 52˚C
“As per the Recommended Standards for Sampling Nut-In-Shell and Kernel Recovery Evaluation”
9
Operating Environment Drying Oven User Manual By Thermoline Scientific
Drying Oven Operating Environment Bench Top Location
Ensure that the drying oven is placed in the correct
environment, away from direct sunlight or direct heat sources
such as heaters (Fig 1). The product shouldn’t be placed in a
room where the ambient temperature exceeds that of which it
was designed to operate.
Drying ovens should be stored inside at all times. Failure to
adhere to this could cause signicant drops in cabinet
performance and damage to items stored inside.
Extreme Operating Environment:
• Temperature: 10°C to 32°C (+/-2.0°C)
• Humidy: Up to 85%RH
Optimal Environment: (Fig 2)
• Temperature: 23°C (+/-2.0°C)
• Humidy: 50%RH (+/-5%RH)
Fig 1. Suitable Environment
Bench Top Requirements:
• Under no circumstances should any ovens be stacked
on top of each other (Fig 2).
• Thermoline 150 litre ovens have removable castors for
benchtop storage. To safely remove castors, simply tip
the cabinet over gently onto it's back or side and
unscrew the castors from the bottom the cabinet (Fig
3). This is a two person job so please get assistance.
Fig 2.
Fig 3.
10
Este manual sirve para los siguientes modelos
9
Tabla de contenidos
