Thermal Arc ARCMASTER 300 AC/DC Manual de usuario

208

230

460

1/3

60Hz

INVERTER

Operating Manual

ARCMASTER®

Version No: 1Issue Date: February 22, 2006 Manual No.: 0-4863

Operating Features:

INVERTER ARC WELDER

300 AC/DC

Art # A-07238

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new Thermal Arc product. We are proud

to have you as our customer and will strive to provide you with

the best service and reliability in the industry. This product is backed

by our extensive warranty and world-wide service network. To

locate your nearest distributor or service agency call

1-800-752-7621, or visit us on the web at www.Thermalarc.com.

This Operating Manual has been designed to instruct you on the

correct use and operation of your Thermal Arc product. Your

satisfaction with this product and its safe operation is our ultimate

concern. Therefore please take the time to read the entire manual,

especially the Safety Precautions. They will help you to avoid

potential hazards that may exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Thermal Arc is a Global Brand of Arc Welding Products for

Thermadyne Industries Inc. We manufacture and supply to major

welding industry sectors worldwide including; Manufacturing,

Construction, Mining, Automotive, Aerospace, Engineering, Rural

and DIY/Hobbyist.

We distinguish ourselves from our competition through market-

leading, dependable products that have stood the test of time. We

pride ourselves on technical innovation, competitive prices,

excellent delivery, superior customer service and technical support,

together with excellence in sales and marketing expertise.

Above all, we are committed to develop technologically advanced

products to achieve a safer working environment within the welding

industry.

WARNINGS

Read and understand this entire Manual and your employer’s safety practices before installing,

operating, or servicing the equipment.

While the information contained in this Manual represents the Manufacturer's best judgement,

the Manufacturer assumes no liability for its use.

ArcMaster 300 AC/DC Inverter Arc Welder

Instruction Manual Number 0-4863 for:

Part Number 10-3074

Published by:

Thermadyne Corporation

82 Benning Street

West Lebanon, New Hampshire, USA 03784

(603) 298-5711

www.thermalarc.com

Thermadyne Corporation

Reproduction of this work, in whole or in part, without written permission of the pub-

lisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any

loss or damage caused by any error or omission in this Manual, whether such error

results from negligence, accident, or any other cause.

Publication Date: February 22, 2006

Record the following information for Warranty purposes:

Where Purchased: ___________________________________

Purchase Date: ___________________________________

Equipment Serial #: ___________________________________

TABLE OF CONTENTS

SECTION 1:

SAFETY INSTRUCTIONS AND WARNINGS ....................................................... 1-1

1.01 Arc Welding Hazards ...................................................................................... 1-1

1.02 Principal Safety Standards ............................................................................. 1-5

1.03 Precautions de Securite en Soudage à L’Arc .................................................. 1-6

1.04 Dangers Relatifs au Soudage à L’Arc .............................................................. 1-6

1.05 Principales Normes de Securite ................................................................... 1-10

1.06 Limited Warranty.......................................................................................... 1-11

SECTION 2:

INTRODUCTION ...................................................................................... 2-1

2.01 How To Use This Manual ................................................................................ 2-1

2.02 Equipment Identification................................................................................. 2-1

2.03 Receipt Of Equipment ..................................................................................... 2-1

2.04 Symbol Chart ................................................................................................. 2-2

2.05 Description ..................................................................................................... 2-3

2.06 Functional Block Diagrams ............................................................................. 2-4

2.07 Transporting Methods .................................................................................... 2-4

SECTION 3:

INSTALLATION ....................................................................................... 3-1

3.01 Environment ................................................................................................... 3-1

3.02 Location ......................................................................................................... 3-1

3.03 Electrical Input Connections ........................................................................... 3-1

3.04 Electrical Input Requirements ........................................................................ 3-2

3.05 Input Power.................................................................................................... 3-3

3.06 High Frequency Introduction .......................................................................... 3-3

3.07 High Frequency Interference .......................................................................... 3-4

3.08 Duty Cycle ...................................................................................................... 3-4

3.09 Specifications ................................................................................................. 3-5

SECTION 4:

OPERATOR CONTROLS ............................................................................. 4-1

4.01 ArcMaster 300 ACDC Controls ....................................................................... 4-1

4.02 Weld Process Selection for ArcMaster 300 ACDC .......................................... 4-3

4.03 Weld Parameter Descriptions for ArcMaster 300 ACDC ................................. 4-4

4.04 Weld Parameters for ArcMaster 300 ACDC .................................................... 4-6

4.05 Power Source Features................................................................................... 4-7

SECTION 5:

SET-UP FOR SMAW (STICK) AND GTAW (TIG) .................................................. 5-1

TABLE OF CONTENTS (continued)TABLE OF CONTENTS

SECTION 6:

SEQUENCE OF OPERATION ........................................................................ 6-1

6.01 Stick Welding ................................................................................................. 6-3

6.02 AC or DC HF TIG Welding ............................................................................... 6-3

6.03 Slope Mode Sequence .................................................................................... 6-4

6.04 Slope Mode with repeat sequence .................................................................. 6-4

6.05 Pulse Controls ................................................................................................ 6-5

SECTION 7:

BASIC TIG WELDING GUIDE ....................................................................... 7-1

7.01 Explanation of “Fluttery Arc” when AC TIG Welding on Aluminum ................. 7-1

7.02 Electrode Polarity ........................................................................................... 7-2

7.03 Tungsten Electrode Current Ranges ............................................................... 7-2

7.04 Tungsten Electrode Types ............................................................................... 7-2

7.05 Guide for Selecting Filler Wire Diameter ......................................................... 7-3

7.06 Shielding Gas Selection .................................................................................. 7-3

7.07 TIG Welding Parameters for Low Carbon & Low Alloy Steel Pipe .................. 7-3

7.08 Welding Parameters for Aluminum ................................................................ 7-4

7.09 Welding Parameters for Steel ......................................................................... 7-4

SECTION 8:

BASIC ARC WELDING GUIDE ..................................................................... 8-1

8.01 Electrode Polarity ........................................................................................... 8-1

8.02 Effects of Stick Welding Various Materials ..................................................... 8-1

SECTION 9:

ROUTINE MAINTENANCE .......................................................................... 9-1

SECTION 10:

BASIC TROUBLESHOOTING ...................................................................... 10-1

10.01 ........................................................................................TIG Welding Problems

10.02 ......................................................................................Stick Welding Problems

10.03 ..................................................................................... Power Source Problems

SECTION 11:

VOLTAGE REDUCTION DEVICE (VRD) ........................................................... 11-1

11.01 ............................................................................................... VRD Specification

11.02 ............................................................................................... VRD Maintenance

11.03 ........................................................................................ Switching VRD On/Off

SECTION 12:

POWER SOURCE ERROR CODES................................................................. 12-1

TABLE OF CONTENTS

SECTION 13:

PARTS LIST ......................................................................................... 13-1

13.01 ..................................................................................... Equipment Identification

13.02 ................................................................................. How To Use This Parts List

LIMITED WARRANTY

WARRANTY SCHEDULE

GLOBAL CUSTOMER SERVICE CONTACT INFORMATION .......................... Inside Rear Cover

ARCMASTER 300 ACDC

1-1

February 22, 2006

1.01 Arc Welding Hazards

WARNING

ELECTRIC SHOCK can kill.

Touching live electrical parts can cause fatal

shocks or severe burns. The electrode and

work circuit is electrically live whenever the

output is on. The input power circuit and

machine internal circuits are also live when

power is on. In semiautomatic or automatic

wire welding, the wire, wire reel, drive roll

housing, and all metal parts touching the

welding wire are electrically live. Incorrectly

installed or improperly grounded equipment

is a hazard.

1. Do not touch live electrical parts.

2. Wear dry, hole-free insulating gloves and body

protection.

3. Insulate yourself from work and ground using dry

insulating mats or covers.

4. Disconnect input power or stop engine before

installing or servicing this equipment. Lock input

power disconnect switch open, or remove line fuses

so power cannot be turned on accidentally.

5. Properly install and ground this equipment according

to its Owner’s Manual and national, state, and local

codes.

6. Turn off all equipment when not in use. Disconnect

power to equipment if it will be left unattended or out

of service.

7. Use fully insulated electrode holders. Never dip holder

in water to cool it or lay it down on the ground or the

work surface. Do not touch holders connected to two

welding machines at the same time or touch other

people with the holder or electrode.

8. Do not use worn, damaged, undersized, or poorly

spliced cables.

9. Do not wrap cables around your body.

10.Ground the workpiece to a good electrical (earth)

ground.

SECTION 1:

SAFETY INSTRUCTIONS AND WARNINGS

WARNING

PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN AWAY.

PACEMAKER WEARERS KEEP AWAY UNTIL CONSULTING YOUR DOCTOR. DO NOT LOSE THESE INSTRUCTIONS.

READ OPERATING/INSTRUCTION MANUAL BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.

Welding products and welding processes can cause serious injury or death, or damage to other equipment or property,

if the operator does not strictly observe all safety rules and take precautionary actions.

Safe practices have developed from past experience in the use of welding and cutting. These practices must be

learned through study and training before using this equipment. Some of these practices apply to equipment

connected to power lines; other practices apply to engine driven equipment. Anyone not having extensive

training in welding and cutting practices should not attempt to weld.

Safe practices are outlined in the American National Standard Z49.1 entitled: SAFETY IN WELDING AND CUTTING.

This publication and other guides to what you should learn before operating this equipment are listed at the end of

these safety precautions. HAVE ALL INSTALLATION, OPERATION, MAINTENANCE, AND REPAIR WORK PERFORMED

ONLY BY QUALIFIED PEOPLE.

ARCMASTER 300 ACDC

1-2 February 22, 2006

11.Do not touch electrode while in contact with the work

(ground) circuit.

12.Use only well-maintained equipment. Repair or replace

damaged parts at once.

13.In confined spaces or damp locations, do not use a

welder with AC output unless it is equipped with a

voltage reducer. Use equipment with DC output.

14.Wear a safety harness to prevent falling if working

above floor level.

15.Keep all panels and covers securely in place.

WARNING

ARC RAYS can burn eyes and skin; NOISE can

damage hearing.

Arc rays from the welding process produce

intense heat and strong ultraviolet rays that

can burn eyes and skin. Noise from some

processes can damage hearing.

1. Wear a welding helmet fitted with a proper shade of

filter (see ANSI Z49.1 listed in Safety Standards) to

protect your face and eyes when welding or watching.

2. Wear approved safety glasses. Side shields

recommended.

3. Use protective screens or barriers to protect others

from flash and glare; warn others not to watch the

arc.

4. Wear protective clothing made from durable, flame-

resistant material (wool and leather) and foot

protection.

5. Use approved ear plugs or ear muffs if noise level is

high.

WARNING

FUMES AND GASES can be hazardous to your

health.

Welding produces fumes and gases. Breathing

these fumes and gases can be hazardous to

your health.

1. Keep your head out of the fumes. Do not breath the

fumes.

2. If inside, ventilate the area and/or use exhaust at the

arc to remove welding fumes and gases.

3. If ventilation is poor, use an approved air-supplied

respirator.

4. Read the Material Safety Data Sheets (MSDSs) and

the manufacturer’s instruction for metals,

consumables, coatings, and cleaners.

5. Work in a confined space only if it is well ventilated,

or while wearing an air-supplied respirator. Shielding

gases used for welding can displace air causing injury

or death. Be sure the breathing air is safe.

Welding or cutting Electrode Size Filter Welding or cutting Electrode Size Filter

Torch soldering 2 Gas metal-arc

Torch brazing 3 or 4 Non-ferrous base metal All 11

Oxygen Cutting Ferrous base metal All 12

Light Under 1 in., 25 mm 3 or4 Gas tungsten arc welding All 12

Medium 1 to 6 in.,25-150 mm 4 or5 (TIG) All 12

Heavy Over 6 in.,150 mm 5 or 6 Atomic hydrogen welding All 12

Gas welding Carbon arc welding All 12

Light Under1/8 in.,3 mm 4 or 5 Plasma arc welding

Medium 1/8 to 1/2 in.,3-12 mm 5 or 6 Carbonarc air gouging

Heavy Over1/2 in.,12 mm 6 or 8 Light 12

Shielded metal-arc Under5/32 in.,4 mm 10 Heavy 14

5/32 to 1/4 in., 12 Plasma arc cutting

Over 1/4 in.,6.4 mm 14 Light Under 300 Amp 9

Medium 300 to 400 Amp 12

Heavy Over400 Amp 14

Eye protectionfilter shade selector for welding or cutting

(goggles or helmet), from AWS A6.2-73.

ARCMASTER 300 ACDC

1-3

February 22, 2006

6. Do not weld in locations near degreasing, cleaning, or

spraying operations. The heat and rays of the arc can

react with vapors to form highly toxic and irritating

gases.

7. Do not weld on coated metals, such as galvanized,

lead, or cadmium plated steel, unless the coating is

removed from the weld area, the area is well ventilated,

and if necessary, while wearing an air-supplied

respirator. The coatings and any metals containing

these elements can give off toxic fumes if welded.

WARNING

WELDING can cause fire or explosion.

Sparks and spatter fly off from the welding

arc. The flying sparks and hot metal, weld

spatter, hot workpiece, and hot equipment can

cause fires and burns. Accidental contact of

electrode or welding wire to metal objects can

cause sparks, overheating, or fire.

1. Protect yourself and others from flying sparks and

hot metal.

2. Do not weld where flying sparks can strike flammable

material.

3. Remove all flammables within 35 ft (10.7 m) of the

welding arc. If this is not possible, tightly cover them

with approved covers.

4. Be alert that welding sparks and hot materials from

welding can easily go through small cracks and

openings to adjacent areas.

5. Watch for fire, and keep a fire extinguisher nearby.

6. Be aware that welding on a ceiling, floor, bulkhead, or

partition can cause fire on the hidden side.

7. Do not weld on closed containers such as tanks or

drums.

8. Connect work cable to the work as close to the welding

area as practical to prevent welding current from

traveling long, possibly unknown paths and causing

electric shock and fire hazards.

9. Do not use welder to thaw frozen pipes.

10.Remove stick electrode from holder or cut off welding

wire at contact tip when not in use.

WARNING

FLYING SPARKS AND HOT METAL can cause

injury.

Chipping and grinding cause flying metal. As

welds cool, they can throw off slag.

1. Wear approved face shield or safety goggles. Side

shields recommended.

2. Wear proper body protection to protect skin.

WARNING

CYLINDERS can explode if damaged.

Shielding gas cylinders contain gas under high

pressure. If damaged, a cylinder can explode.

Since gas cylinders are normally part of the

welding process, be sure to treat them

carefully.

1. Protect compressed gas cylinders from excessive heat,

mechanical shocks, and arcs.

2. Install and secure cylinders in an upright position by

chaining them to a stationary support or equipment

cylinder rack to prevent falling or tipping.

3. Keep cylinders away from any welding or other

electrical circuits.

4. Never allow a welding electrode to touch any cylinder.

5. Use only correct shielding gas cylinders, regulators,

hoses, and fittings designed for the specific

application; maintain them and associated parts in

good condition.

6. Turn face away from valve outlet when opening

cylinder valve.

7. Keep protective cap in place over valve except when

cylinder is in use or connected for use.

8. Read and follow instructions on compressed gas

cylinders, associated equipment, and CGA publication

P-1 listed in Safety Standards.

ARCMASTER 300 ACDC

1-4 February 22, 2006

WARNING

Engines can be dangerous.

WARNING

ENGINE EXHAUST GASES can kill.

Engines produce harmful exhaust gases.

1. Use equipment outside in open, well-ventilated areas.

2. If used in a closed area, vent engine exhaust outside

and away from any building air intakes.

WARNING

ENGINE FUEL can cause fire or explosion.

Engine fuel is highly flammable.

1. Stop engine before checking or adding fuel.

2. Do not add fuel while smoking or if unit is near any

sparks or open flames.

3. Allow engine to cool before fueling. If possible, check

and add fuel to cold engine before beginning job.

4. Do not overfill tank — allow room for fuel to expand.

5. Do not spill fuel. If fuel is spilled, clean up before

starting engine.

WARNING

MOVING PARTS can cause injury.

Moving parts, such as fans, rotors, and belts can cut

fingers and hands and catch loose clothing.

1. Keep all doors, panels, covers, and guards closed

and securely in place.

2. Stop engine before installing or connecting unit.

3. Have only qualified people remove guards or

covers for maintenance and troubleshooting as

necessary.

4. To prevent accidental starting during servicing,

disconnect negative (-) battery cable from battery.

5. Keep hands, hair, loose clothing, and tools away

from moving parts.

6. Reinstall panels or guards and close doors when

servicing is finished and before starting engine.

WARNING

SPARKS can cause BATTERY GASES TO

EXPLODE; BATTERY ACID can burn eyes and

skin.

Batteries contain acid and generate explosive gases.

1. Always wear a face shield when working on a battery.

2. Stop engine before disconnecting or connecting

battery cables.

3. Do not allow tools to cause sparks when working on

a battery.

4. Do not use welder to charge batteries or jump start

vehicles.

5. Observe correct polarity (+ and –) on batteries.

WARNING

STEAM AND PRESSURIZED HOT COOLANT

can burn face, eyes, and skin.

The coolant in the radiator can be very hot

and under pressure.

1. Do not remove radiator cap when engine is hot. Allow

engine to cool.

2. Wear gloves and put a rag over cap area when

removing cap.

3. Allow pressure to escape before completely removing

cap.

Otros manuales para ARCMASTER 300 AC/DC

Tabla de contenidos

Otros manuales de Sistema de soldadura de Thermal Arc

Thermal Arc

Thermal Arc 161 S Manual de usuario

Thermal Arc

Thermal Arc A-07360 Manual de usuario

Thermal Arc

Thermal Arc FABRICATOR 190 Manual de usuario

Thermal Arc

Thermal Arc TA-8/300-KAT Manual de usuario

Thermal Arc

Thermal Arc POWERMASTER 320SP Manual de usuario

Thermal Arc

Thermal Arc 251 FABRICATOR Manual de usuario

Thermal Arc

Thermal Arc ARCMASTER 200 TS Manual de usuario

Thermal Arc

Thermal Arc FABRICATOR 210 Manual de usuario

Thermal Arc

Thermal Arc FABRICATOR 190 Manual de usuario

Thermal Arc

Thermal Arc EXCEL-ARC 750 CC Manual de usuario

Thermal Arc

Thermal Arc FABRICATOR 181i Manual de usuario

Thermal Arc

Thermal Arc FABRICATOR 181i Manual de usuario

Thermal Arc

Thermal Arc 175 SE ARC MASTER Manual de usuario

Thermal Arc

Thermal Arc 6045 EXCEL-ARC Manual de usuario

Thermal Arc

Thermal Arc 202 AC/DC Manual de usuario

Thermal Arc

Thermal Arc Viking 210GM Manual de usuario

Thermal Arc

Thermal Arc WC100B Manual de usuario

Thermal Arc

Thermal Arc 161 S Manual de usuario

Thermal Arc

Thermal Arc Arcmaster 400 MST Manual de usuario

Thermal Arc

Thermal Arc 251 FABRICATOR Manual de usuario

Thermal Arc

Thermal Arc LM-200 ARCMASTER Manual de usuario

Thermal Arc

Thermal Arc Fabricator 140 Manual de usuario

Thermal Arc

Thermal Arc ARCMASTER 185 AC/DC Manual de usuario

Thermal Arc

Thermal Arc 211i Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manual de usuario