Thermadyne Fabricator 252i US Manual de usuario

CONTROL PCB REPLACEMENT INSTRUCTIONS

0-5248 Rev AB 1 May 16, 2012

Kit Componants

The following components are included in this kit.

• ControlPanelPCBAssembly

• AntiStaticStrap

• MountingScrews(4)

• Instructions

Control PCB Replacement

NOTE

This process is the same for the Fabricator and the Transmig units. Transmig is shown in these in-

structions.

1. Disconnect power from the power supply

2. Locate the anti static strap in this kit and follow instructions for proper use and ﬁt it to your body.

3. Removefour(4)ControlPanelscrews(#1).

Art # A-1

Figure1:FrontPanelScrewRemoval(Transmigshown)

ThermadyneHoldingsCorporation

Suite300,16052SwingleyRidgeRoad

St.Louis,MO63017,USA

Telephone:1-800-426-1888•Fax:1-800-535-0557

Email: [email protected]

www.thermalarc.com

Manual 0-5248

Control PCB Replacement and

Part Numbers for

Fabricator 252i US W7005381

Fabricator 252i EU W7005388

Transmig 250i W7005336

Assembly Instructions

CONTROL PCB REPLACEMENT INSTRUCTIONS

4. TiltpaneltowardyouanddisconnecttheRibbonCablebyippingthetwolockingtabsoutwardthenlifting

the harness connector from the board.

Art # A-10???

Figure2:ControlPCBAccess

5. Remove the control panel assembly and replace with the new one by reversing these procedures.

6. LocatethenewControlPanelPCBAssemblyandorientitliketheonejustremovedandattachtheribbon

cable making sure it snaps into place with both locking tabs being activated.

7. Carefullysetthecontrolpanelassemblybackintothefrontpanelandsecurewiththefourscrews.

8. Apply power to the unit and verify the control panel is working.

NOTE

Any information/calibrations previously stored are now gone. All information is now factory default

and any desired calibrations will need to be done again.

U.S. Customer Care: 800-426-1888 / FAX 800-535-0557 •Canada Customer Care: 905-827-4515 / FAX 800-588-1714 www.thermal-dynamics.com

International Customer Care: 940-381-1212 / FAX 940-483-8178

A Global Cutting & Welding Market Leader

™

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de soldadura de Thermadyne

Thermadyne

Thermadyne Fabricator 211i Manual de usuario

Thermadyne

Thermadyne THERMAL ARC ARC-MASTER 351 Manual de usuario

Thermadyne

Thermadyne Thermal Arc 400GMS CC Manual de usuario

Thermadyne

Thermadyne Thermal Arc 185TSW Manual de usuario

Thermadyne

Thermadyne THERMAL ARC 130 GTS & S CC/TIG Manual de usuario

Thermadyne

Thermadyne CE CutMaster 51 Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario