Pr
Progr
ogramming the switching time
amming the switching time
Switching times for lighting systems, machines,
ventilation systems, alarm systems etc.
Formation of day groups
If the same switching times are active
on several days of the week, they occu-
py just one memory location, e.g.
Monday – Friday 7.30 hrs ON.
28 memory locations are available.
Group formation
In answer to the text question Copy,
decide by pressing the key that
the day program should be copied to
another day of the week.
When programming an ON and OFF
switching time, e.g. Monday 9 AM, a
switch-off at 9 AM always has priority.
Program review
Following programming the timer
makes a program review back to
midnight and then sets the correct
switching status.
Example: Switching on the lighting of a sports hall
on Mon., Tues., Thurs., Fri. from 7.30h until 12h.
Programming example
Select Prog by pressing the key.
Store your selection by pressing the key.
Select New by pressing the or .
Store your selection by pressing the key.
Select ON by pressing or .
Store your selection by pressing .
Set the hours and minutes by pressing the
or key.
Store selection by pressing .
To store this day of the week only
Select weekday by pressing or .
Select store by pressing .
Store by pressing
To copy to other days of the week
Store COPY by pressing .
Select weekday by pressing or .
Store by pressing
To leave out a day of the week, skip by pressing
the key.
Finally select the STORE display by pressing .
Store your selection by pressing .
Example
Example
