TFA 35.1109.IT Manual de usuario

WEATHER STATION

Instruction Manual

Cat. No. 35.1109.IT

Thank you for choosing this wireless weather station from

TFA.

BEFORE OU USE IT

Please be sure to read the instruction manual

carefully.

This information will help you to familiarise yourself with

your new device, learn all of its functions and parts, find

out important details about its first use and how to operate

it, and get advice in the event of faults.

Following the instruction manual for use will prevent

damage to the device and loss of your statutory rights

arising from defects due to incorrect use.

We shall not be liable for any damage occurring as a

result of not following these instructions.

Please take particular note of the safety advice!

Please look after this manual for future reference.

SCOPE OF SUPPL :

•

Weather tation (basic unit)

•

Outdoor transmitter

•

Instruction manual

FIELD OF OPERATION AND ALL OF THE

BENEFITS OF OUR NEW WEATHER STATION AT

A GLANCE

•

DCF Radio controlled time with manual setting

option

•

Time reception ON/OFF (user selectable)

•

Time zone option ±12 hours

•

Calendar display (year only in setting mode)

•

Display 8 moon phases

•

Weather forecasting with weather tendency indicator

•

Indoor and outdoor temperature display with

MIN/MAX records

•

Temperature display in ºC

•

Indoor and outdoor humidity display

•

Humidity data display as RH%

•

Low battery indicator

•

Table standing or wall mounting

FOR OUR SAFET :

•

The product is exclusively intended for the field of

application described above. The product should

only be used as described within these instructions.

•

Unauthorised repairs, modifications or changes to

the product are prohibited.

•

The product is not to be used for medical purpose or

for public information, but is intended solely for

home use.

Caution!

Risk of injury:

•

Keep this instrument and the batteries out of reach

of children.

•

Batteries must not be thrown into the fire, short-

circuited, taken apart or recharged. Risk of

explosion!

•

Batteries contain harmful acids. Low batteries

should be changed as soon as possible to prevent

damage caused by a leaking battery. Never use a

combination of old and new batteries together or

batteries of different types. Wear chemical-resistant

protective gloves and glasses when handling leaked

batteries.

! Important information on product safety!

•

Do not expose the instrument to extreme

temperatures, vibration or shock.

•

The outdoor transmitter is protected against splash

water, but is not watertight. Choose a shady and dry

position for the transmitter.

tand

LCD

Display

Function keys

ELEMENTS

The Weather Station

Thermo-Hygro Transmitter

•

Remote transmission of outdoor

temperature and humidity to weather

station by 868MHz

•

Alternately display the outdoor

temperature and humidity readings

on LCD

•

Wall mounting case

•

Mounting at a sheltered place. Avoid

direct rain and sunshine

TO INSTALL AND REPLACE BATTERIES IN THE

THERMO-H GRO TRANSMITTER

The outdoor thermo-hygro transmitter uses 2 x AAA, IEC

LR3, 1.5V batteries. To install and replace the batteries,

please follow the steps below:

Battery

compartment

Hanging

hole

1. Remove the battery cover by pushing

the battery cover upwards with your

thumb.

2. Insert the batteries, observing the

correct polarity (see battery

compartment marking).

Replace the battery cover on the unit.

TO INSTALL AND REPLACE BATTERIES IN THE

WEATHER STATION

The weather station uses 2 x AAA, IEC LR3, 1.5V

batteries. To install and replace the batteries, please follow

the steps below:

1. Insert finger or other solid

object in the space at the

bottom center of the

battery compartment and

lift up to remove the cover.

2. Insert batteries observing

the correct polarity (see

marking).

3. Replace compartment

cover.

Battery replacement

•

Replace the batteries when the battery symbol of

the weather station appears on the upper display.

•

When the batteries of the transmitter are used up,

the low battery icon appears next to the outdoor

temperature display.

Note:

In the event of changing batteries in any of the units, all

units need to be reset by following the setting up

procedures. This is due to a random security code

assigned by the transmitter at start-up. This code must be

received and stored by the weather station in the first 3

minutes of power being supplied to the transmitter.

SETTING UP

1. First, insert the batteries in the transmitter (see “To

install and replace batteries in the thermo-hygro

transmitter” above).

2. Within 2 minutes of powering up the transmitter,

insert the batteries in the weather station (see “To

install and replace batteries in the weather

station” above). Once the batteries are in place, all

segments of the LCD will light up briefly. Following

the indoor temperature/humidity and the time as

00:00 will be displayed. If these information are not

displayed on the LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before

reinserting them. Once the indoor data is displayed

user may proceed to the next step.

3. After the batteries are inserted, the weather station

will start receiving data signal from the transmitter.

The outdoor temperature and humidity data should

then be displayed on the weather station. If this

does not happen after 2 minutes, the batteries will

need to be removed from both units and reset from

step 1.

4. In order to ensure sufficient 868 MHz transmission

however, the distance between the weather station

and the transmitter should not be more than 100

meters (see notes on “Positioning” and “868 MHz

Reception”).

Note:

In the event of changing batteries of the units,

ensure the batteries do not spring free from the

contacts. Always wait at least 1 minute after

removing the batteries before reinserting, otherwise

start up and transmission problems may occur.

5. Once the outdoor data reception test period is

completed, the DCF tower icon in the clock display

will start flashing in the upper left corner. This

indicates that the clock has detected that there is a

radio signal present and is trying to receive it. When

the time code is received, the DCF tower becomes

permanently lit and the time will be displayed.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium

Atomic Clock operated by the Physikalisch Technische

Bundesanstalt Braunschweig which has a time deviation of

less than one second in one million years. The time is

coded and transmitted from Mainflingen near Frankfurt via

frequency signal DCF-77 (77.5 kHz) and has a

transmitting range of approximately 1,500 km. Your radio-

controlled weather station receives this signal and

converts it to show the precise time in summer or

wintertime.

The quality of the reception depends greatly on the

geographic location. In normal cases, there should be no

reception problems within a 1,500km radius of Frankfurt.

DCF reception is done twice daily at 02:00 and 03:00 am.

If the reception is not successful at 03:00 am, then the

next reception takes place the next hour and so on until

06:00am, or until the reception is successful. If the

reception is not successful at 06:00 am, then the next

attempt will take place the next day at 02:00 am.

If the tower icon flashes, but does not set the time or the

DCF tower does not appear at all, then please take note of

the following:

•

Recommended distance to any interfering sources

like computer monitors or TV sets is a minimum of

1.5 - 2 meters.

•

Within ferro-concrete rooms (basements,

superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit

close to a window and/ or point its front or back

towards the Frankfurt transmitter.

•

During nighttime, the atmospheric disturbances are

usually less severe and reception is possible in most

cases. A single daily reception is adequate to keep

the accuracy deviation below 1 second.

+ key

MIN/MAX key

ET key

FUNCTION KE S:

Weather Station:

The weather station has 3 easy to use function keys: 1 key

on the front, and 2 keys on the back

SET key

•

Press and hold the key to enter manual setting

modes: time zone, manual time setting, calendar,

time reception ON/OFF

+ key

•

Increase, change, toggle all values in manual set

mode

MIN/MAX key

•

Press shortly to toggle between indoor and outdoor

MAX/MIN temperature and current temperature

LCD SCREEN

The LCD screen is split into 5 sections displaying the

information for time/calendar, weather forecast, moon

phase, indoor data, and outdoor data.

* When the signal is successfully received by the weather

station, the outdoor transmission icon will be switched on.

(If not successful, the icon will not be shown on LCD). The

user can then easily see whether the last reception was

successful (icon on) or not (icon off).

MANUAL SETTINGS:

The following manual settings can be changed by pressing

and holding the SET key:

•

Time zone setting

•

Manual time setting

•

Calendar setting

•

Time reception ON/OFF setting

Moon

phase

icon

Weather

tendency

indicator

Calendar

Indoor

relative

humidity

in RH%

Time

reception

icon (for

DCF time)

Indoor

temperature

in ºC

Weather

forecast icon

Outdoor data signal

reception indicator*

Outdoor

temperature

in ºC

Outdoor relative

humidity in RH%

Low battery indicator

(weather station)

Low battery

indicator

(transmitter)

Time

TIME ZONE SETTING:

The time zone default of the weather station is “0”. To set

a different time zone:

1. The current time zone value starts flashing.

2. Use the + key to set the time zone. The range runs

from 0 to -12 and then runs from +12 back to 0 in

consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Manual

Time Setting.

MANUAL TIME SETTING:

In case the weather station cannot detect the DCF-signal

(for example due to disturbances, transmitting distance,

etc.), the time can be manually set. The clock will then

work as a normal quartz clock.

1. The hour digit will start flashing.

2. Use the + key to set the hour.

3. Press again the SET key to set the minutes. The

minute digits start flashing.

4. Use the + key to set the minutes.

Confirm with the SET key and enter the Calendar

setting.

Note:

The unit will still try and receive the signal despite it being

manually set. When it does receive the signal, it will

change the manually set time into the received time.

During reception attempts the DCF tower icon will flash. If

reception has been unsuccessful, then the DCF tower icon

will not appear but reception will still be attempted the

following day.

Flashing

Hour flashing

Minutes flashing

CALENDAR SETTING:

The date default of the weather station is 1. 1. 2011. Once

the radio-controlled time signals are received, the date is

automatically updated. However, if the signals are not

received, the date can also be set manually.

1. The year starts flashing.

2. Use the + key to set the year (between year 2011-

2039).

3. Press the SET key again to confirm and to enter the

month setting. The month starts flashing.

4. Use the + key to set the month.

5. Press the SET key again to confirm and to enter the

date setting mode. The date starts flashing.

6. Use the + key to set the date.

Confirm all calendar settings with the SET key and

enter the Time reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

In areas where reception of the DCF time is not possible,

the DCF time reception function can be turned OFF. The

clock will then work as a normal Quartz clock. (Default

setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the + key to turn OFF the time reception

function.

3. Confirm with the SET key and exit the manual

setting.

Year

Date and month

Flashing

Tabla de contenidos

Otros manuales de Estación meteorológica de TFA

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

La Crosse Technology

La Crosse Technology C86371 Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2210 Manual de usuario

La Crosse Technology

La Crosse Technology WS-811561 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario