TFA 35.1089.IT Manual de usuario

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

Cat. No. 35.1089.IT

Thank you for choosing this wireless weather station from TFA.

BEFORE YOU USE IT

Please be sure to read the instruction manual carefully.

This information will help you to familiarise yourself with your new device, learn

all of its functions and parts, find out important details about its first use and

how to operate it, and get advice in the event of faults.

Following the instruction manual for use will prevent damage to the device and

loss of your statutory rights arising from defects due to incorrect use.

We shall not be liable for any damage occurring as a result of not

following these instructions.

Please take particular note of the safety advice!

Please look after this manual for future reference.

SCOPE OF SUPPLY:

Weather station (basic unit)

Outdoor transmitter

Instruction manual

FIELD OF OPERATION AND ALL OF THE BENEFITS OF YOUR NEW

WEATHER STATION AT A GLANCE:

DCF-77 Radio controlled time function with manual time setting options

DCF time reception ON/OFF

24 hour display

Alarm function with snooze

Time zone +/- 12 hours

Temperature display in degree Celsius (°C)

Indoor and outdor temperature with MIN/MAX records

Manual reset of MIN/MAX records

3 weather forecast with weather tendency indicator

Wireless transmission at 868 MHz

Signal reception intervals at 4 seconds

Low battery indicator

Wall mounting or table standing (foldout stand)

FOR YOUR SAFETY:

The product is exclusively intended for the field of application described

above. The product should only be used as described within these

instructions.

Unauthorised repairs, modifications or changes to the product are

prohibited.

Caution!

Risk of injury:

Keep this instrument and the batteries out of reach of children.

Batteries must not be thrown into the fire, short-circuited, taken apart or

recharged. Risk of explosion!

Batteries contain harmful acids. Low batteries should be changed as soon as

possible to prevent damage caused by leaking.

Never use a combination of old and new batteries together, nor batteries of

different types. Wear chemical-resistant protective gloves and safety glasses

when handling leaking batteries.

! Important information on product safety!

Do not expose the instrument to extreme temperatures, vibration or

shock.

The outdoor transmitter is protected against splash water, but is not

watertight. Choose a shady and dry position for the transmitter.

LCD

Display

ELEMENTS

The Weather station

The Outdoor Temperature Transmitter

Remote transmission of outdoor temperature

to weather station by 868 MHz signals

Shower proof casing

Wall mounting and table-standing

HOW TO INSTALL AND REPLACE BATTERIES IN THE

TEMPERATURE TRANSMITTER

The temperature transmitter uses 2 x AA, IEC LR6, 1.5V

battery. To install and replace the batteries, please follow

the steps below:

1. Remove the battery compartment cover at the back

of the transmitter.

Function keys

Foldout stand

Battery

compartment

cover

Hanging hole

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The weather station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries will

need to be replaced, the low battery

icon will appear on the LCD. To install

and replace the batteries, please

follow the steps below:

1. Lift up the battery compartment

cover.

2. Insert batteries observing the

correct polarity (see marking).

3. Replace compartment cover.

Battery replacement

Replace the batteries when the battery symbol of the weather station

appears above the indoor temperature.

When the batteries of the transmitter are used up, the low battery icon

appears above the outdoor temperature display.

Note:

In the event of changing batteries in any of the units, all units need to be reset

by following the setting up procedures. This is because a security code is

assigned by the transmitter at start-up and this code must be received and

stored by the Weather station in the first 3 minutes of power being supplied to

it.

SETTING UP:

Note: This weather station receives only one outdoor transmitter.

1. First, insert the batteries into the Temperature transmitter. (see “Install

and replace batteries in the temperature transmitter“).

2. Immediately after and within 30 seconds, insert the batteries into

Weather station (see “Install and replace batteries in the weather

station”). Once the batteries are in place, all segments of the LCD will

light up briefly. Following the time as 0:00 and the weather icon will be

displayed. If these are not displayed after 60 seconds, remove the

batteries and wait for at least 30 seconds before reinserting them.

3. After inserting the batteries, the Weather station will start receiving data

from the transmitter. The outdoor temperature and the signal reception

icon should then be displayed on the Weather station. If this does not

happen after 3 minutes, the batteries will need to be removed from both

units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the weather station and the transmitter (see notes on

“Mounting” and “868 MHz Reception”).

5. Once the remote temperature has been received and displayed on the

weather station, the DCF time (radio controlled time) code reception is

automatically started. This takes typically between 3-5 minutes in good

conditions.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated

by the Physikalisch Technische Bundesanstalt Braunschweig which has a time

deviation of less than one second in one million years. The time is coded and

transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5

kHz) and has a transmitting range of approximately 1,500 km. Your radio-

controlled weather station receives this signal and converts it to show the

precise time in summer or wintertime.

SET key

The quality of the reception depends greatly on the geographic location. In

normal cases, there should be no reception problems within a 1,500 km radius

of Frankfurt.

DCF reception is done twice daily at 02:00 and 03:00 am. If the reception is

not successful at 03:00 am, then the next reception takes place the next hour

and so on until 06:00am, or until the reception is successful. If the reception is

not successful at 06:00 am, then the next attempt will take place the next day

at 02:00 am.

If the tower icon flashes, but does not set the time or the DCF tower does not

appear at all, then please take note of the following:

Recommended distance to any interfering sources like computer

monitors or TV sets is a minimum of 1.5 - 2 meters.

Within ferro-concrete rooms (basements, superstructures), the received

signal is naturally weakened. In extreme cases, please place the unit

close to a window and/ or point its front or back towards the Frankfurt

transmitter.

During nighttime, the atmospheric disturbances are usually less severe

and reception is possible in most cases. A single daily reception is

adequate to keep the accuracy deviation below 1 second.

FUNCTION KEYS:

Weather station:

The weather station has four easy to use function keys.

SET key

Press the key to enter manual setting modes: Time zone, Time

reception ON/OFF and Manual time

MIN/MAX

RESET key

ALARM key

+ key

Outdoor Reception

Signal icon*

MIN/MAX indoor

temperature

MIN/MAX outdoor

temperature

Stop the alarm

+ key

To make adjustment for various settings

Stop the alarm

ALARM key

Enter the alarm setting mode

Switch the alarm ON/ OFF

Stop the alarm

MIN/MAX RESET key

Press and hold to reset the MIN/MAX temperature records

Activate the snooze

Exit manual setting modes

LCD SCREEN AND SETTINGS:

* When the outdoor signal is successfully received by the Weather Station,

this icon will be switched on. (If not successful, the icon will not be shown in

LCD) So user can easily see whether the last reception was successful (icon

on) or not (icon off).

Time

Indoor

Temperature in °C

Outdoor

Temperature in °C

Weather tendency

indicator

Weather forecast icon

Low battery indicator

(weather station)

Low battery indicator

(transmitter)

Radio controlled time

reception icon

Alarm icon

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

Time zone

Time reception DCF ON/OFF

Manual time

Press and hold the SET key for about 3 seconds to advance to the setting

mode:

TIME ZONE SETTING:

The time zone default is "0" hour. To set a different time zone:

1. The current time zone value starts flashing.

2. Use the +key to set the time zone. The range runs from 0, -1, -2…

-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Time reception On/Off setting.

TIME RECEPTION ON/OFF SETTING

In area where reception of the radio-controlled time (DCF time) is not possible,

the time reception function can be turned OFF. The clock will then work as a

normal Quartz clock. (Default setting is ON).

1. The digit “ON” digit will start flashing on the LCD.

2. Use the +key to turn OFF the time reception function if necessary.

3. Confirm with the SET key and enter the Manual time setting.

Note:

If the Time Reception function is turned OFF manually, the clock will not

attempt any reception of the radio-controlled time (DCF time) as long as the

Time zone (flashing)

flashing

Minutes (flashing)

Hours (flashing)

Alarm icon (ON)

Alarm time

Time Reception OFF function is activated. The Time Reception icon and the

DCF icon will not be displayed on the LCD.

MANUAL TIME SETTING

In case the weather station is not able to detect the radio-controlled time (DCF

time) signal (disturbances, transmitting distance, etc.), the time can be

manually set. The clock will then work as a normal Quartz clock.

To set the clock:

1. The hour digits start flashing in the time display section.

2. Use the +key to adjust the hours and then press SET key to go to the

minute setting.

3. The minute will be flashing. Press the +key to just the minutes.

4. Confirm with the SET key and exit the setting mode.

Note :

The unit will still try to receive the signal despite a manual setting. When the

signal is received, the manually set time will automatically be replaced by the

received time. During reception attempts, the DCF tower icon will flash. If

reception has been unsuccessful, the DCF tower icon will not appear but

reception will still be attempted.

ALARM SETTING

To set alarm:

1. Press and hold ALARM for about 3 seconds until the alarm time display

flashes.

2. The hour digit and the alarm icon will be flashing. Press the +key to

adjust the hour.

3. Press ALARM button once and minute digit will be flashing. User shall

then press +button to set the minute.

4. Press ALARM button once to confirm the setting.

5. To activate/ deactivate the alarm function, press the ALARM button

once. The display of the alarm icon represents that the alarm is "ON".

Note: The duration of alarm sounding is 85 seconds

TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE

ALARM:

1. When the alarm is sounding, press the MIN/MAX RESET key to activate

the snooze function. The alarm will stop and re-activate after the snooze

interval of 10 minutes.

2. To stop the alarm completely, press any keys other than the MIN/MAX

RESET key.

WEATHER FORECAST AND TENDENCY

THE WEATHER FORECASTING ICONS :

There are 3 weather icons in the second section of LCD which can be

displayed in any of the following combinations :

For every sudden or significant change in the air pressure, the weather icons

will update accordingly to represent the change in weather. If the icons do not

change, then it means either the air pressure has not changed or the change

has been too slow for the Weather station to register. However, if the icon

displayed is a sun or raining cloud, there will be no change of icon if the

weather gets any better (with sunny icon) or worse (with rainy icon) since the

icons are already at their extremes.

Rainy

Cloudy with

sunny intervals

Sunny

Tabla de contenidos

Otros manuales de Estación meteorológica de TFA

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

La Crosse Technology

La Crosse Technology C86371 Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2210 Manual de usuario

La Crosse Technology

La Crosse Technology WS-811561 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario