Texas Instruments TI-84 - Plus - Edition Graphing Calculator Manual de usuario

Step 4

Step 6

Step 7

Step 8

Your Passion. Our Technology. Student Success.™

TI-84 Plus & TI-84 Plus Silver Edition

Press-to-Test

This feature will delete all RAM and Archive except for the disabled Apps

and Programs when using operating system 2.40 or greater.

SET-UP INSTRUCTIONS

1. Begin with the graphing calculator powered OFF.

2. Hold down both the LEFT and RIGHT arrow keys and press ON –

all three keys simultaneously.

3. Release and the calculator will start with the RESET OPTIONS screen.

4. By default, ANGLE mode is set to DEGREE and STAT DIAGNOSTICS are ON.

To change settings, use the ARROW keys and press

(These are the default settings for the calculator.)

5. Once your selections have been completed, press OK.

(press the ZOOM button located just below the screen).

6. The RESET COMPLETE screen will appear. Press any key to continue.

7. Press the APPS key, which should display an

“APPS HAVE BEEN DISABLED”message.

8. Press the PRGM key, which should display a

“PROGRAMS HAVE BEEN DISABLED”message.

= illustration shown.

RESTORE INSTRUCTIONS ON REVERSE SIDE.

Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition

Step 2

Step 5

Restore Instructions for Disable Mode

RESTORE OPTION 1

1. Using an I/O unit-to-unit cable or USB cable (which comes with

TI-84 Plus models), connect together two graphing calculators –

at least one of the two units must be “temporarily disabled.”

2. On the Receiver’s unit:

a. Press the 2ND-LINK function to go to the SEND / RECEIVE screen.

b. Highlight RECEIVE but DO NOT press yet.

3. On the Sender’s unit:

a. Press the 2ND-LINK function to go to the SEND / RECEIVE screen.

Send will be highlighted be default.

4. On the Receiver’s unit:

a. Once the receivers unit has been prepared to RECEIVE

(see Step 2), press

5. On the Sender’s unit:

a. Select 4:LIST and press L1*.

Note the arrow that appears next to L1.

b. Highlight TRANSMIT (press RIGHT arrow key) Press on

the receiving calculator rst and then on the sending unit.

c. An on-screen “Waiting” message will appear.

If you select L1 you may be prompted to overwrite the variable.

Select the overwrite option to continue.

6. Upon successful transmission, a DONE message will appear on

both screens. Devices are now restored from the disabled mode

and have full access to previous Apps and Programs.

RESTORE OPTION 2

1. Using an I/O unit-to-unit cable (which comes with the Testing

Solutions Tool Kit), or USB cable (which comes with TI-84 Plus

models), connect together two graphing calculators – at least one

of the two units should be “temporarily disabled.”

2. From the TESTGUARD 2.0 Apps Home Screen select option 4:REENABLE

on the non-disabled unit.

= illustration shown.

* Any le can be selected, we are demostrating with L1.

Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition (Continued)

Otros manuales para TI-84 - Plus - Edition Graphing Calculator

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Calculadora de Texas Instruments

Texas Instruments

Texas Instruments TI-Nspire CX II Manual de usuario

Texas Instruments

Texas Instruments TI-15 Manual de usuario

Texas Instruments

Texas Instruments TI-5630 Manual

Texas Instruments

Texas Instruments Voyage 200 Manual

Texas Instruments

Texas Instruments BA II Plus Manual de usuario

Texas Instruments

Texas Instruments TI-34 - MultiView Scientific Calculator Manual de usuario

Texas Instruments

Texas Instruments TI-5660 Manual

Texas Instruments

Texas Instruments TI-30XS Multiview Manual de usuario

Texas Instruments

Texas Instruments TI-73 Explorer Guía de inicio rápido

Texas Instruments

Texas Instruments TI-73 Explorer Manual

Texas Instruments

Texas Instruments TI-31 Solar Manual de usuario

Texas Instruments

Texas Instruments TI-Nspire Manual de usuario

Texas Instruments

Texas Instruments CBL Manual de usuario

Texas Instruments

Texas Instruments TI36X - Solar Scientific Calculator Manual de usuario

Texas Instruments

Texas Instruments Titanium TI-89 Guía de inicio rápido

Texas Instruments

Texas Instruments Voyage 200 Manual

Texas Instruments

Texas Instruments TI-55 Manual de usuario

Texas Instruments

Texas Instruments TI-30X - IIS Scientific Calculator Manual de usuario

Texas Instruments

Texas Instruments TI-83 - Plus Graphing Calculator Guía de inicio rápido

Texas Instruments

Texas Instruments Voyage 200 Manual

Texas Instruments

Texas Instruments Titanium TI-89 Manual de usuario

Texas Instruments

Texas Instruments TI-Nspire CAS Manual de usuario

Texas Instruments

Texas Instruments TI-83 Guía

Texas Instruments

Texas Instruments MathPrint TI-30X Plus Manual de usuario

Manuales populares de Calculadora de otras marcas

HP 35s Manual

Casio

Casio CFX-9970G Manual de usuario

LEXIBOOK

LEXIBOOK EL350 Manual de usuario

HP HP-97 Manual de usuario

Citizen

Citizen SDC-414N Manual de usuario

Casio

Casio fx-3800P Manual de usuario

Canon

Canon P26-DHIII Manual de usuario

Citizen

Citizen 520DPA Manual de usuario

Sharp

Sharp EL-9900 Manual de usuario

Casio

Casio FX-9860GII - SOFTWARE VERSION 2-00 Manual de usuario

Casio

Casio MS-7UC Manual de usuario

Sharp

Sharp WriteView EL-W506 Manual técnico

Casio

Casio FC-200 Manual de usuario

Casio

Casio fx-CG50 Manual de usuario

HP HP-67 Guía del usuario

Royal

Royal CBC2000 Manual de usuario

Heathkit

Heathkit IC-2009 Manual de usuario

Universal

Universal UNV-15907 Manual de usuario