Tevion 49180 Manual de usuario
Car CD/MP3 Radio with Bluetooth
with USB,SD and Front Aux input
Now you have purchased a Tevion® product you can
rest assured in the knowledge that as well as your 3
year parts and labour warranty you have the added
peace of mind of dedicated helplines and web support
User Guide
49180
Welcome Section……………………………………....3
Precautions………………………………………….....4
Before You Install……………………………………..5-6
Installation…………………………………………....7-8
Wiring Diagram………………………………………..9
Location of the Controls…………………………….....10
Basic Operation……………………………………....11-15
Bluetooth Operation…………………………………..16
CD/MP3/USB/SD Operation………………………...…17
FAQ…………………………………………………….18
Technical Specication………………………………..19
Warranty……………………………………………….20
Fault Report Card………………………………....……21
Contents
2
Page Number
Congratulations!
You have made an excellent choice with the purchase of this quality
Tevion® brand product. By doing so you now have the assurance and
peace of mind which comes from purchasing a product that has been
manufactured to the highest standards of performance and safety,
supported by the high quality standards of Aldi.
We want you to be completely satised with your purchase so this
Tevion® product is backed by a comprehensive manufacturer’s 3 year
warranty and an outstanding after sales service through our dedicated
Helpline. We hope you will enjoy using your purchase for many years to
come. If you require technical support or in the unlikely event that your
purchase is faulty please telephone our Helpline for immediate
assistance. Faulty product claims made within the 3 year warranty
period will be repaired or replaced free of charge provided that you
have satisfactory proof of purchase (keep your till receipt safe!). This
does not affect your statutory rights. However, be aware that the
warranty will become null and void if the product is found to have been
deliberately damaged, misused or disassembled.
Welcome Section
3
Electric and electronic equipment (EEE) contains materials,
parts and substances which can be dangerous to the
environment and harmful to human health if not disposed of
correctly. Please contact your local authority for details of
correct disposal operating in your area. The product should
not be disposed of in household waste.
Do not dispose of used batteries in household waste. Please
contact your local authority for details of disposal / recycling
schemes in your area.
Precautions
• This unit will only play the following discs.
• This unit does not play les that have Digital Rights Management (DRM).
• If you have les that have Digital Rights Management (DRM) you should consult
with the vendor that you purchased les from for instructions on proper use.
4
Never allow children to play with electrical equipment
Care of Discs
Do not use CDs with labels or stickers
attached. The label may leave a sticky
residue when it begins to peel.
Clean the discs with a soft
cleaning cloth. Wipe each disc
from the centre out.
Do not use a CD with paste or
ink residue on it.
Handle the disc by its edge to
keep the disc clean. Do not
touch the disc’s surface.
Before You Install
IMPORTANT: Remove the two transport screws from the top of
the unit before installation.
.
5
Notes on Installation
• Disconnect negative battery terminal before starting installation. Consult the
vehicle owner’s manual for proper instruction.
• The unit is designed for a 12Volt DC negative ground operation system only.
• Be sure to connect the colour coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage the
vehicle's electrical system.
• Be sure to connect the negative (-) speaker leads to the negative (-) speaker
terminal.
• Never connect negative (-) speaker leads to chassis ground.
• The unit is only designed for use with 4 speakers. Do not combine output for
use with 2 speakers. Do not ground negative speaker leads to the chassis
ground.
• Make sure all the connections are correct before turning on your unit.
• When replacing the fuse(s), the replacement must be of the same amperage
as shown on the fuse holder.
• Do not block vents or heater panels. Blocking them will cause heat to build
up inside and may result in re.
• After completing the installation and before operating the unit, reconnect
the battery.
• Then press the (RES) button with a pointed object, such as a ball-point pen to
set the unit to its initial status.
Please remove the screws before installing the radio; Failure to do so will result in
the CD deck rejecting the disc. Please refer to the illustration below:
Before you Install
Car audio equipment installations can be troublesome at times, even to the
most experienced of installation technicians. If you are not condent working
with electrical wiring, removing and reinstalling interior panels, carpeting,
dashboards or other components of your vehicle, please call our customer
support number 01270 508538 and we will recommend tters in your area.
6
1. Remove the outer trim frame.
Din Front Mount
2. Insert the keys supplied with the old
unit into both sides of the unit as
shown in gure below until they click.
Pull to remove the old unit from the
dashboard.
DO NOT DISCONNECT WIRES
AT THIS TIME!
3. Mark the polarity of the speaker wires. Marking the polarity of the speaker
wires will make it easier to connect the existing speakers to your car radio.
Consult wiring diagram of existing head unit before disconnecting any
wires. If you are not positive of the polarity of the existing wires from the
speakers to the head unit, install new wires.
a. While the old unit is playing, disconnect the wires from one speaker.
b. Take a length of masking tape and fold it around the wire so it forms a ag.
c. On the masking tape mark the polarity of the speaker wires (+ & -), as well as
left or right and front or rear.
d. Double check that you marked the rst speaker correctly by checking
that the speaker wires are the same at the head unit.
e. Repeat the procedure for all of the speakers.
f. Mark the power, ground and any other wires also.
Installation
7
WARNING!
Disconnect negative battery terminal from battery before starting
installation. Consult the vehicle owners manual for proper instructions.
Note 1:
Mark the polarity of the existing speaker wires before disconnecting battery.
Note 2:
Remove the two transport screws from the top of the unit before installing.
Din Front Mount
1. After removing the old radio and
mounting sleeve, insert supplied
mounting sleeve into opening.
2. Bend the tabs on the mounting
sleeve to keep the mounting
sleeve rmly in place.
3. Attach wires from the unit to existing
wires. See wiring connections
diagram. Insert radio into dashboard.
Then apply the trim face to the
outside of the radio.
4. Support radio using
supplied rear mounting
bolt and steal bar. See parts
list.
Installation
8
Din Rear-Mount
Installation using the screw holes on both sides of the unit.
1. Screw holes on the side of the unit.
2. Screws. Use either truss screws
(5x8mm) or ush surface screws
(4x8mm), depending on the shape
of the screw holes in the bracket.
3. Vehicle factory mounting bracket.
4. Dashboard or console.
5. Hook (remove this part).
2 x Keys
1 x Aux in wire
1 x Fascia carry case
1 x Flat Washer
1 x Metal Screw
1 x Metal Support Strap
Note:
The mounting sleeve, outer trim ring and the
mounting strap are not used for this method of
installation.
Supplied Parts
9
Wiring Connection
Make sure that you have a good chassis ground. Good ground connections will
eliminate most electrical noise problems. A good chassis ground requires a
tight connection to the vehicle's metal chassis. The area around the ground
connection should be clean, bare metal without rust, paint, plastic, dust, or dirt
for a good electrical connection.
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. Ground
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
Speaker Wiring Notes
• Follow the above wiring diagram to install the head unit with new or
existing speakers.
• This unit is designed for use with four speakers with an impedance between
4Ohms to 8Ohms.
• An impedance load of less than 4 Ohms could damage the unit.
• Never Bridge or combine the speaker wire outputs. When not using four
• speakers, use electrical tape to tape the ends of the un-used speaker
outputs to prevent a short circuit.
• Never ground the negative speaker terminals to chassis ground.
Location Of The Controls
10
15. CLK button
16. TEL button
17. AUX INPUT Jack
18. EJECT button
19. CD slot
20. USB port
21. SD slot
22. Anti-theft LED indicator
23. RESET button
1. OPEN button
2. SEL button and VOL dial
3. POWER button
4. LCD
5&6. >>| and |<< button
7. BAND button
8. MODE button
9. MUTE button
10. AP button
11. TOP/PLAY/PAUSE, INT, RPT,
RDM and 1-6 Number buttons
12. AF button
13. TA button
14. PTY button
Tabla de contenidos
Otros manuales de Receptor de coche de Tevion
