4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.teucerled.co.uk
V002-11-2019
Teucer (UK) Ltd
Bedford House, Fulham Green,
69-79 Fulham High Street,
London, SW6 3JW, UK
Warranty
• Products must be installed and serviced by
qualified electrician.
• Please ensure the receiver is mounted in a
water proof enclosure if installed in an outdoor
environment, avoiding metallic enclosures.
• Always ensure products are mounted in areas
with adequate ventilation to avoid overheating.
• Please ensure outputs of any power suppliers
used in conjunction with this product comply
with its working voltage.
• Never install product whilst connected to power
and double check connections before switching
on to avoid short circuits.
Safety
Should this product fail during the 5 year warranty
period it will be replaced free of charge, subject
to the correct installation of the original product
in accordance with applicable and appropriate
electrical codes and instructions provided by
Teucer, as well as subsequent return of the faulty
unit. Teucer does not accept responsibility for any
installation costs associated with the replacement
of this product and Teucer reserves the right to
alter specifications without prior notice. For further
information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
Controlling your LED strip • ON/OFF: Turn ON/OFF LED strips on the last
setting.
• To adjust the colour, touch the RGB colour
slider.
• To change the brightness, press the
brightness button.
• Zones: When ON choose the Zones you
wish to control. When OFF short press Zone
to turn ON current Zone, long press for 2s to
turn OFF the desired Zone.
• Mode: Short press to run next mode, long
press 2s runs mode-cycle.
• W: Short press to turn ON/OFF W channel,
• Long press 1-5s for continuous 256 levels
adjustment of the white channel brightness.
ZONE
ZONE
ZONE
ZONE
BRT/SPEED
WHITE
POWER
MODE
ON/OFF
Brightness
/ speed
Zones Play mode
White
BACKFRONT
AC INPUT L
AC INPUT N
WP-4RGBWN
DMX OUTPUT D+
DMX OUTPUT D-
DMX OUTPUT GND
LNGNDD+ D-
DMX OUTPUT
INPUT
85-265VAC
86mm
86mm
45.5mm
59mm
35mm
62mm
11.5mm
Compatible
Back box types:
European style 86 size
Back box mounting
Wall panel Bracket Back box
Bracket removal
• There are 10 dynamic modes, press the play mode button to browse through modes. To choose the
mode, press and hold play mode for 2s.
• There are 10 speeds for the play modes. Press the speed button to browse through the speed levels
and to sync the receivers if out of sync.
• Press and hold the speed button to go to the highest speed level.
• To save your favourite setup, press and hold scene buttons.
• To recall saved setup, press scene button.
• You can save up to 4 scenes.
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
sales@teucer.eu
No. Name No. Name
1 RGB jump 6 RGB fade in and out
2 RGB smooth 7 Red fade in and out
3 6 color jump 8 Green fade in and out
4 6 color smooth 9 Blue fade in and out
5 Yellow Cyan purple smooth 10 White fade in and out
Dynamic play mode presets
